Has anyone had issues tightening the bottom bolt on the inlet to blower? My blowers on the car and there is no way to get to that bolt. I bought 11” long Allen wrenches too. You can’t get the angle to get into the bolt head. Wrench hits the valve cover. Do I need to pull the blower off and...
I recently installed a IW balancer, the kit comes with a new crank seal. My car is low mileage and the factory seal looked fine so I didn’t put the new one in.
Should I have used it?
Sent from my iPhone using Tapatalk
Has anyone ran the PowerMaster 58304 155amp alternator in their Cobra? I ordered one today.
I had a 200amp power master in my car when it was turbo, alternator was fine no issues.
Sent from my iPhone using Tapatalk
I know it’s a long shot but I’ll try anyway before I buy new.
Looking for a VMP GT500 throttle body for my 2.65 Gen3r. Hopefully new or close to new as I can get.
Sent from my iPhone using Tapatalk
Selling my 3 Piece 18x9.5 and 18x11 CCW Classic’s. Tires are Nitto 265/35 fronts and 305/35 MT Street SS a few months left on the MTs. Price is USD dollars. I will ship on your dime.
I did have them on my car when I had an SRA and they fit but you’ll need to roll your fenders. They’re IRS...
Well after trying to sell my complete Hellion turbo kit and no luck, I’ve decided to stay turbo for now. My question is has anyone with a Hellion kit, gone to cg fab hot side? I’m trying to eliminate some lag and hopefully forward facing headers will help.
Sent from my iPhone using Tapatalk
Selling,trading or will part out my Hellion turbo kit. Upgraded to blow through slot maf with bigger 3.5-4” cold side piping. Will come with Hot side, cold side, Turbo, turbo blanket, Cobra Intake with 1/2” spacer, throttle cable/bracket, Lance Flathers rad tank, aem true boost x controller with...
Looking for a Morris Engineering battery mount, not sure if they aren’t in business anymore or what but I’ve had no luck in getting a hold of them to buy one. Anyway, I really need it for my build and will pay. Ready to buy immediately.
Sent from my iPhone using Tapatalk
Selling my Hellion hot side/Turbo with stock manifolds, turbo bracket/spacers and the hellion coolant crossover , I just picked it up before Christmas used, I’m now changing the build. Good condition but I was going to re ceramic coat it cause I’m extremely fussy. I wasn’t sure what ask since I...
Anyone have any experience with BC coil overs? Just want to know about them in general. I want to run them with MM caster/camber plates. Just haven’t seen or heard of anyone running them.
Sent from my iPhone using Tapatalk
I’m possibly looking at getting rid of my 2.3 tvs and going with a single hellion kit. My question is, has anyone used a Steeda K member with the kit or will it work? If not I’ll sell it and do a MM, no big deal but I have the Steeda new in the box kinda wanted to use it if I could. Also has...
Anyone ever ported there 2.3 TVS? Looking at Jokerz porting and considering doing it instead of a bigger blower. Any feedback appreciated.
Sent from my iPhone using Tapatalk
Selling my 26 spline spec ss trim. Rated for 900hp/900ft-lbs Has around 2500-3000 miles on it.
550.00 USD shipped
Good clutch for someone on budget
I’m in Canada so I’ll ship if
Sent from my iPhone using Tapatalk
Looking for stainless cg fab hot side in street/ drag so I can keep my a/c and power steering. My cars a street car so I want too keep as much as possible.
Thanks
Sent from my iPhone using Tapatalk
Looking for the dual aeroforce gauge set up with silver face and green back lighting. The factory SVT match ones. Would prefer new or close too it. Money ready to go now.
Sent from my iPhone using Tapatalk
Has anyone done the cg fab single street drag kit with a steeda k member? Cg said it will work which I’m not saying I don’t believe them. Just wondering if anyone has done it and how it worked? Mines brand new in the box so I’m not against selling it and doing the MM if I have too.
Thanks...
Hey everyone. With the new Gen 5 whipple out I’m pretty sure I need it but now with this sale on the Gen 4 2.9 crusher thinking about that route. Anyway my car has a Gen 2 tvs,lethal budget return setup with stealth 340s and id1000 injectors , 1 3/4” ARH long tubes and stock motor. Wanting a 94...
I’m going to pull the trigger this week on GForce axles. My car makes 655rwhp on my race tune. Do I need outlaw axles good for 1200+ or will the renegades good for 850+ be enough? Just a street car with the odd roll race and maybe 1 track day a year. Irs is fully built with MM bushing kit, tru...
Selling a few pieces off my sra swapped cobra. Parts have less than 500 miles. I’m in Canada but will ship. Like to sell as package unless I can get the 3 pieces sold to 3 different people at the same time.
Steeda Adjustable Lowers
Bmr street/drag springs 1” lower
Koni adjustable shocks
Cost...
Pulling my sra to go back to irs. I did wild rides torque box kit. I never welded it tho. Just bolted. Should I take the kit out? Or just leave it in?
Thanks
Sent from my iPhone using Tapatalk
Looking for a stock heat exchanger with hoses and brackets and a cobra engineering head cooling mod. Pay pal ready to go.
Sent from my iPhone using Tapatalk