Search results

I did do it myself. However I swapped all wiring etc. Only original wiring left was the door harnesses.

It’s definitely worth it.

I know this is an older post but do you have any of these in stock?

May be a little harder to sell them now that you can buy replacements. They were hard to find at one point.

I think I have one. I will look this afternoon.

My setup was 2.76/4lb on a home port and posi ported TB and plenum. I upgraded to a BA2400, 60lbs, BAP. I didn't need all of it but I wanted to be safe. I am also running LT, O/R X, etc. I have since removed the lower, and unplugged the BAP.

Keep in mind I did this several years ago so the info may be off. When I built my NA motor I degreed the cams based off the numbers provided to my via the designer and talking to several folks. I used the Mod-camponents ~sp? adjustable cam gears. Once I was setup and found TDC I started the...

I have Hagerty on my 01 Cobra and 93 Cobra. You can go on their website and get the value of your car.

I am working on a 93 Cobra. The proportioning valve is missing the rubber plug at the forward end. I do not want to have to gut the PV and convert over to manual. I was able to find a rebuild kit for the internals but this kit does not come with a new plug for the end cap. What are the options...

Would you happen to have the proportioning valve?

True. The car ran a best of 10.72@123 with a 2.76/4lb and C4. I guess I was thinking it may be worth more down the road in more of a stock state than with the 04 setup.

Selling as a whole is not an option. The 01 was the first mustang the wife and i purchase. I’ve had it for about 15years so I can’t part with it. Plan is to put it back as close to stock as possible and just put it up Incase the kids want it when I’m old..lol It can be sold as complete as one...

I have a 01 Cobra. It has a complete 04 Cobra swap. When I say complete I mean, engine, transmission, wiring, Ecu, fuel tank etc etc. I am moving on to the newer platforms so I am waiting to return my car back to stock. I will be looking for a 01 Cobra NA engine, ecu, and all wiring etc. My...

What's the part number for this exhaust?

I have a similar issue. My cruise always work in the past. When I did the terminator swap I lost cruise control. Same as above, the horn works but nothing else cruise related. I have gone through the manual and haven't found anything yet.

I cant speak for what you are doing but I swapped my entire wiring harness around when I did the 04 Termi swap. The only wiring I had to do to make the 01 taillights work with the 04 harness was to add a ground. Other than that it was good. I will look up the electrical drawings and see if you...

I have ran a 275/40 in the rear. Both the 555R and NTO5R. The 275 does bulge a bit but I didn't do any spirited driving.

I may be interested in one. Can you send me a price and the numbers listed on the lower? Thanks

I didn't have much luck finding one when I was looking. Only places I found were Ebay and here. After I seen what they were going for I was shocked. I ended up finding mine in a old box in the shop.

Same here, I sealed mine up over 3 years ago with JB Weld. No issues to date.

Back when my car was NA I had 4:30's but after I had those for a while I had to try the 4.56's. It wasn't near as bad as it I thought it would be. I drove the car around a good while. The 99/01 and Mach motors love RPM. The 4:30 and 4:56 gears really made the car come to life. I have some older...

A few years ago I did a complete 04 Terminator swap. I removed all my NA cobra parts and sold most of them. I had an idea of going turbo. Started acquiring the NA parts but one has a 01 Cobra throttle cable and bracket.(Well at least not cheap) I started digging around my stash and found what...

I have a 2004 Cobra motor in my 2001. I am going the turbo route. I need the following parts. Upper and lower 2001 Cobra intake. I would like it to be as complete as possible. 2001 Cobra Throttle cable and bracket Alternator bracket Alternator Parts I will have for trade or sell...

I tried to search but I cant seem to find the correct info. I just reinstall my motor after putting it back together. It runs great but I forgot to plug up the two connection on back of the head. Any of you know what these are for? I will attempt to plug them back in tomorrow. Thanks

I am looking for a set of the 2000 Cobra R wheels. Not the chrome but the satin silver. Please email me with what you have and a price. kezell at eatel.net Thanks, Kevin