I recently picked up a MFP crank support from Paramount Speed. I have a 2014 GT500 with a MHS Built 5.8L Engine (Sleeved, Stock Crank, Rods, Pistons, Ported Heads, Stage 3 MHS Cams, and more). It is currently making 1122RWHP with a 2.6 Upper and 10% Lower on a Stage 3 VMP Gen 3 R. (made more...
Hello everyone! This is the first post for me in the GT350 section. We own a 2018 GT350R we picked up back in March. The car has a Whipple 2.9L Gen 4 Supercharger. I just added a set of DW1200cc injectors to the car to get it ready to run E85. We took a trip down to Palm Beach Dyno to get the...
Hey guys wanted to share some videos from my recent purchase. I recently picked up a 2018 Shelby GT350R from a friend. It has some pretty cool mods already: Whipple 2.9L Gen 4 Supercharger, Billet OPG + CG, Palm Beach Dyno Tune, Dual VMP Fuel Pump Boosters, VMP IAT Kit, Kooks Longtubes, Borla...
Hello everyone! I stopped by Palm Beach Dyno to film with their new 2020 GT500. I was lucky enough to drop by on the same day they had received the new prototype JLT Cold air intake for the 2020 GT500. So Ken and the guys at Palm Beach Dyno made a baseline pull and then swapped the intake. Ken...
Hello everyone! I just wanted to share the latest on my 14 GT500. Disclaimer: I had full intentions, plans, and funds ready for this if it did happen. I don't regret anything and I do not blame anything except raw horsepower and torque on a cool Florida Day.
My Setup:
2014 GT500 31k Miles...
So I recently had the pleasure of driving my friend Don's 2018 Shelby GT350R which features Kooks Longtubes, Whipple 2.9L Gen 3 Supercharger, and some other great mods. The car is an absolute beast especially in the mountain roads of TN. This is honestly the best car I have driven to date and I...
I recently installed the Foster Sound Tube mod on my 14 GT500. Install was super simple and it really adds some sound to make things more exciting. Below is a video of install and sound clips. It took less than an hour to install it.
So we had some fun the other day with Cody's GT500 at VMP Performance. Cody is running a 10% Lower and 2.5 upper on a stock GT500 longblock. The car is tuned by Lund Racing. It made incredible power and surprisingly held together. Cody plans to run it at the track and see what it can do. He is...
So I recently installed a VMP 2.65L Gen 3 R on my 2014 GT500. I switched from the stock 2.3L TVS supercharger. Thanks to Justin Starkey from VMP Performance for installing and tuning the car. It picked up a lot of power and torque same day over the trinity in 95 degree heat and very high...
Hi everyone. I wanted to share the recent feature video I did on my friend Jeff's 2011 Sterling Gray GT500. The car is super clean and Jeff got a killer deal on it.
Mod List:
13/14 2.3 Trinity Blower Swap 2.67 Pulley 90 MM Metco Idler Pulley VMP Boost a Pump 123MM JLT Carbon Fiber Intake Super...
So my next mod after the heat exchanger was VMP Fuel Pump Booster kit for the 13-14 GT500. During the dyno tuning for the Stage 4 Power Pack Justin at VMP noticed my fuel pump duty cycle was maxing out at 5900RPM. The fuel AFR was still in an acceptable range but we knew this would have to be...
So I recently took a drive over to VMP Performance with my 2014 GT500. Recently I have been having major heat soak issues now that we are in the thick of Florida summer heat. I have been experiencing high coolant temps while in traffic and very high IAT2 downstream temps.
During a 90-100...
Hello everyone! So 1 Week with the car and I have already made a trip over to VMP Performance for some mods. My 2014 GT500 was mostly stock with the exception of a O/R X Pipe and a Lund Tune from the previous owner. When we got to VMP we flashed a stock tune into the car to get a solid baseline...
I want to make this post to hopefully help others out with the same issue. I just bought my 14 GT500 Monday and on the way home the intercooler pump stopped working. I spent quite some time trying to diagnose the issue. I have this featured in my video below. I actually found someone with the...
Hello everyone. My name is Andrew. I recently picked up a 2014 Shelby GT500. I traded in my 2003 Cobra Terminator. I am in love with the 14 GT500 and I can't wait to start modding it. I make some videos on YouTube. Below is some video shots of the new car and the journey picking up the car.
I...
I thought everyone would enjoy this one! I recently filmed a video on my friend John's 91 LX swapped with a Terminator engine, T56, IRS, and VMP Gen 3. The car runs deep 10s (for now) and it is an absolute animal. He also swapped in the Dash and Cluster from a 03 Cobra.
I posted last week about a successful trip to OSW where I made two 10.8 passes with a 1.5X 60 foot with stock halfshafts. I took a trip out to FL2K at Bradenton Motorsport Park. Unfortunately first pass up the car broke. I haven't looked under the car yet but I am almost positive the driver side...
So I went to OSW over the weekend. 2000+ DA but I was able to dial in the launch to 1.5X with Stock Axles. Only thing done to the IRS is Maximum Motorsports Race Kit. I was a bit disappointed with the MPH but humidity and heat soak definitely led to lower mph + full weight.
My car is also...
Hey guys! So I wanted to share the progress I have made on the Cobra over the past few weeks. This has been the most exciting and the most difficult part so far with my car. It took a lot of different parts and a lot of time to get the car ready but it is finally done and I couldn't be more...
Hey guys! So I wanted to check in and give you guys my experience with the Mantic Twin Disk Clutch. I installed the Mantic Twin Disk Clutch about 2 Months ago after my stock clutch gave out. To recap: my 03 Cobra has a 2.3L TVS Supercharger on it making 605rwhp. The car has stock suspension with...
Hey guys so this is my third alternator for the Cobra. I made a video showing the steps as well as diagnosing issues after install. It turns out my alternator actually was not broken. It was my plug that failed. So I just wanted to get this post out there to let others know to check your plugs...
Hey guys! I just got my Mantic 9000 Series Ceremetalic clutch in! I did an unboxing so you guys can get an idea of what comes in the box and of course a look at that fancy james bond case it comes in. The kit comes with a throw out bearing, flywheel, flywheel bolts, clutch alignment tool, and...
Hey guys! So I am sure there is a how-to thread somewhere on here but with all of the pictures disappearing and what not I decided i would post here. This video is a little different than my normal video but it is a fairly easy to follow heat exchanger install video.
Hey guys! So as some of you may know we recently installed a Whipple 2.9L whipple stage 2 supercharger kit on Ash's 2016 GT. The car is an absolute blast and although the car gets a fair amount of whine from the blower by itself, we decided to try out Shawn Foster's "Stage 4" Sound tube mod...
Hi guys! So I wanted to share one of the most exciting things we have ever done to one our cars. We finally installed a supercharger on our 2016 Mustang GT. Check out the video below and reply back with any questions. The kit was very straight forward to install and we had no problems and...