Search results

  1. O

    Ran a 03/04 Cobra vert tonight

    Ok so I haven't been on here in awhile. I have a 2012 5.0 with JBA headers, xpipe, axleback, CJ intake, Monoblade TB, FRPP CAI. Car made 477 WHP 390 WTQ on a dynojet. I was supposed to run a 4th gen Camaro but that didn't happen because I had a hole in a drag radial.But I f it and went out...
  2. O

    Best CAI for CJ IM setup ?

    I am going to a CJ IM setup and I am wondering what the best CAI setup is. I have heard Rev Auto; How good is the Ford Racing intake?
  3. O

    Mcleod RST clutch with stock flywheel ?

    Can you run a Mcleod RST clutch with a stock flywheel? I heard the stock flywheel has over hang and wont work when u rev the car over 7k RPM's. I rev mine to 7500 with the Boss intake.
  4. O

    FS: diablosport intune, Ford racing 47lb hour injectors

    I am selling a Diablosport intune handheld programmer. unmarried ready to go for 2011-2014 Mustang gt-$200 I am also selling a set of Ford Racing 47lb hour injectors-$200 stock coyote Intake manifold-$100 stock coyote Intake system-$100
  5. O

    Porting Boss intake walkthrough

    So im gonna try porting my boss getting a different intake setup and going with a Accufab 85mm TB. Where is the walkthrough on how to port the boss intake on here? I did a search and could not find it. also whats the beat intake to run? I currently have a JLT plastic intake. I read the JLT is...
  6. O

    Porrted Boss w/E85 VS CJ & E85

    Ok I need some opinions on deciding what to do next on my car. I have full exhaust Boss intake and tune currently. I have 47lb/hr injectors ready to go in to run E85; I am just waiting to put them in before I decide and have to waste a $200 on a tune. Should I A. port my boss run E85 B. Buy...
  7. O

    5.0 coyote mustang 5.bro VS bolt-on 380 WHP Cobro

    https://www.youtube.com/watch?v=bkF5QOXKeCo
  8. O

    grudge call out race + some other races on a Friday night

    https://m.youtube.com/watch?v=P_r0Rd3-1F0
  9. O

    P0605 check engine light after tune

    So I finally switched from Bama to Brooksspeed. I loaded the tune and did a datalog. Now I have a P0605 check engine light. Says something about the PCM. Is this a big deal? I searched on here a ltitle bit and most people said its not a big deal comes up when u flash a car unless u turn it off.
  10. O

    FS: DIablosport Intune Programmer

    I am selling a like new barely used Diablosport Intune programmer. Works on any 96+ Mustang but has tunes for a 11-14 GT Coyote already on the programmer.Comes with the cable to hook to your laptop. Will be unmarried $300 OBO.
  11. O

    FS: Diablosport Intune programmer

    I am selling my Diablosport Intune programmer. It has tunes for a 11-14 Mustang GT already loaded on it but can be used for any 96+ Mustang. barely used in great condition. Comes with all the cables I bought it with and will be unmarried. $300 OBO. Located in OKC, OK
  12. O

    ported, pullied 03/04 Cobra VS 3v mustang GT on 150 shot

    https://www.youtube.com/watch?v=yayFn3geVfI
  13. O

    my 12 5.0 VS a GT500 vert

    So I was driving around this weekend since this is the first nice weather we had this year. I was driving down the road past my house and seen a silver 03/04 cobra up ahead. I sped up to catch him but just as I did he turned left. Damn! Then I see a LS2 GTO ahead of me. I drive past him and...
  14. O

    So now having tranny issues going into 3rd above 7k RPM

    So I went back to the track with the 3.73s and now after about 5 passes the car will not go into 3rd above 7k RPM. I am going to do the helper spring removal and change my clutch line fluid. What fluid should I go with and how much fluid does it take?
  15. O

    finally made the switch to 3.73's on my N/A Coyote

    Well I switched finally fromm 3.31's to 3.73's:pepper: Car feels great diffently a great mod for anybody staying N/A. From a 40 roll the car pulls harder than before. Now cant wait till tomorrow go to the track on my 28inch tall DR's and try and get my 11 sec pass. My mods btw are full JBA...
  16. O

    shifting at 8k with boss manifold?

    this Guy on a coyote related fb page said he has the exact same setup as me boss Intake, full exhaust, tune, 3.31 gears and a 28 inch tall DR. He says he spun. His coyote car all the way to 8k rpm.at the track ran 11.8@118-119 with 3.31 gears and a 28 inch tall MT drag radial.he said he only...
  17. O

    trap speed question

    K I didn't know where to post this but as in my previous post went to the track with my full exhaust, cai, boss intake, tune 5.0. I ran a [email protected]. I have 3.31 gears and was on a 28 inch tall MT drag radial. any idea y my trap is slow low? I think I should be in the 117 range. I am on...
  18. O

    Went back to the track this time on MT drag radials

    So I took my 2012 back to the track Today. It has boss Intake, cai, full jba exhaust, bmr lca's, 15inch race stars on the back with 275/60/15 MT ET streets. my best pass was [email protected]. The DA today was around 500
  19. O

    FS 2 17 inch stock 05-09 mustang gt wheels

    I am selling my old 2nd wheel setup.2 17 inch 05-09 mustang gt wheels. I believe they r 8 inches wide but don't quote me. I had 275/40/17 nitto nt05r drag radials on them. $100 plus shipping OBO..need them out of my garage to clear space.
  20. O

    tire decision to make im on the fence

    ok so I have a chance this weekend to pick up some 15" racestars with tires MT ET Streets 275/60/15 for $550. they are 15x8. I could either buy these or get another set of drag radials for my spare 17" wheels. I have 3.31's currently. I have a set of 3.73's in my garage. My question is buy the...
  21. O

    Ran my Coyote 5.0 on the opening day at the track

    Went today to the track not really expecting to race as I was on my 235/50/18 street tires. Pirelli P Zero tires. Ended up running a best of [email protected]. Not bad I don't think considering it was the opening day which is gonna have bad prep as no one has laid down any rubber. They scrape the...
  22. O

    $2500 to spend with tax return what to buy?

    Ok so my 5.0 currently is a 6 spd manual car with 3.31's, JBA LT's, xpipe, JBA axleback, Boss intake manifold, JLT CAI. I have $2500 to spend from our tax return. Would it it be worth it to switch to the Cobra Jet intake setup. I seen a comparison on JPC and they gained 2 WHP w/ the CJ and GT500...
  23. O

    Had a run with Pike5.0 from this forum

    Ran Pike5.0 today to kinda see where are cars are and the differences between the mods we have. I have JLT CAI, Boss intake manifold, full exhaust, Bama 93 oct tune. My car made 413 RWHP. He has CAI, O/R xpipe, catback, 3.73 gears, AED tune on E85 We went from a 40 roll. Right off...
  24. O

    my coyote vs a turbo civic and cam, bolt-on Camaro SS

    my Coyote w/ CAI, full exhaust, Boss intake, Bama 93 oct tune made 413 WHP VS A GT35R turbo GSR swapped 99-00 Civic Si owner said made 570 WHP on 24 PSI on 21 PSI during the race https://www.youtube.com/watch?v=ZVbogFDy1Y0 My car VS a cam, headers, intake 5th gen Camaro made 458...
  25. O

    dyno'd my bolt on 5.0 coyote

    So today I dyno'd my bolt-on Coyote 5.0. Made 413 RWHP 376 TQ on 93 oct Bama tune. This was on a dynojet dyno at Alternative Motorsports in Oklahoma City, OK. My mods are JLT CAI, Boss intake Manifold, JBA headers, xpipe, JBA axleback. car made 387 WHP 362 TQ before the Boss intake with the...

Top