Hey guys, question for lowering springs.. I want to lower the front of my 17 gt 1 inch and keep the rear stock. Does anyone here have that set up and if you do how’s it handle? Would it cause any problems with this setup?
I have a 17 gt with stock springs and Velgen split5 20/10.5 with 305/30/20 in the rear and 20/9 with 255/35/20 on the front. I don’t want to lower my car but can’t stand the wheel gap. I was thinking about putting 305/40/20’s on rear and 275/40/20 on front..Think I would have any issues with...
I have a 91 gt and at night when I have my headlights on they flicker at idle. The alternator and the battery are new and they still flicker. Anyone have any idea why they do that ? All the grounds are all good. Thanks
Upon engaging my clutch, I have to keep the rpm above 2000 to get a smooth start. Anything lower (say between idle and 1000), causes shaking from the engine compartment which also transmits a rattling noise all the way to the back of the car (exhaust pipe?) This shaking is even more prominent in...
I have a 2000 mustang gt, when I stop at a light or just stop and I hear my cooling fan kick on my idle drops down then back to normal . If at night time and the fan turns on , not only does the idle drop but my lights go dim then go back normal. Could my coolong fan be going out?
I have a 2000 mustang gt and just got some 18/10 DD for the rear. Now I would like to know if a 295/40/18 would fit without rubbing the fender going over bumps? The 295/35/18 that I have on there now are not tall enough for my taste. If anyone has that set up, can you post a pic? Remember its...
Today I was driving around town with the ac on and when I come to a stop the idle drops down to 200 rpm and then gos to 700 rpm ,it keeps going back and forth with the foot brake on. When at a stop and its doing this and I turn off the ac and it idle fine ( only with ac on and brake pressed) Any...
I have a 2000 Mustang GT and put on the ss lowering springs on the front and rear a month ago. Now the front spring on the drivers side is 2 in. space from tire to fender and the pass side is 3 in. space. I dont think theres a left or right spring, so I dont know... anyone have a clue why its...
Whats up you guys.. I have a 2000 mustang gt vert here in vegas. When I am driving around and turn on my ac it works fine. When I come to a stop then the idle drop down to .. like 500 rpm then the rpm go back up to where it's suppost to after a second. Anyone have this problem before?
I am selling my 95 mustang gt for $5000obo 5- speed with ( 132366 miles on car) that is silver in color with racing strips. It has a rebuilt 305 motor ( around 18k on motor) with Edelbrock intake and manifold and throttle body, msd ignition, march underdrive pulley kit, brand new mass air flow...
Does anyone know where the spout circuit is on a 95 5.0 is? I have my check engine light on and its saying that my spout circuit is open DTC 213 is the code... any ideas
Does it matter if the two 02 sensor are put on backwards? The one on the drivers side is long and skinny ( the part that gos into the H pipe) and the pass side is short and fat..Does it make a differance or no? Will it give me a check engine light if there backward?
When i start my 95 mustang 5.0 it idles like crap ( rpms go up and down)for a min. or so then the check engine light comes on, then the car idles fine.. i can drive it around after that with no more idling problems even with the check engine light on. it just does it on start up. the motor had...
When i start my 95 mustang 5.0 it idles like crap ( rpms go up and down)for a min. or so then the check engine light comes on, then the car idles fine.. i can drive it around after that with no more idling problems even with the check engine light on. it just does it on start up. the motor had...