If you have a way to data log fill up with the key on and watch FTP (Fuel Tank PSI Transducer). I believe they read about 2.5V ambient with no pressure or vacuum with gas cap removed. If the voltage spikes or blips closer to 5V when the gas pump is shutting off then there is a restriction in the...
Are there any chassis shops around the Woodstock, Marietta, Kennesaw, Canton areas to recommend for install of Hans Racecraft matrix style sub-frame connectors attached to rocker and sub-frames? Good welder with drive on lift?
Thanks!
SV
Cobra Bob! Section 2.1. Bullet point 6.
Terminator FAQs
Changes were mainly limited to color and trim. New exterior paint offerings for 2004 were Torch Red (re-introduced after being discontinued mid-year on the 2003), Screaming Yellow and Competition Orange. An optional Mystichrome package...
Do a visual on the ignition switch! The 2 halves start to separate and the internal contacts start to separate as well causing all sorts of weird issues. At that mileage grab a Motorcraft Ignition switch and replace the original.
SV
Thanks Guys!
I didn't know if it was a cyl head issue, valve train component, etc. I've heard the GT-500's older brother's 03-04 Cobra head tick and was afraid this was a similar concern. Seems like some valve train noise is normal but frustrating when you cant put your finger on exactly what...
It’s been a little while since I’ve been active on the forum market place and didn’t realize the rules had changed requiring the photo of screen name and date in one of the photos so this ad has been pulled a couple of times. I have now added a photo with that info and the low profile bolts...
Here they are! Not as expensive as I thought.
This is out of the Roush installation instructions here:
http://www.roushperformance.com/parts/Mustang-Styling-Bar-Lighted-Black-1999-2004.html
NOTE: 1999-2004 Mustang
Due to the larger size of the seat belt shoulder loop on the 1999 Mustang...
There are some other brackets you can get but I have to look for them and I believe they are expensive.
This looks like a good option to modify the stock ones. Maybe grab a set from Autonation Ford, you pull it parts, ebay, etc.
Scroll to bottom...
Dashes mean the PCM is going offline from the cluster due to the PCM shutting off or the network going down/shorting out. I believe 914/915 is the network the PCM and cluster communicate via. If V-Ref is shorted to ground it will shut the PCM down. Check for 5V at the MAF, TPS, DPFE, Fuel Tank...
Per CobraBob's data page:
05/08/2002 - Production start date for early 2003 builds
09/29/2002 - Production start date for late 2003 builds
03/31/2004 - Production endsDoes anyone know the last build date for 2003 model year and or the first build date for 2004?
i may have missed it in Lead Foot...
I can't find an install PDF on Ford Racing site or anywhere else. Does anyone have this kit or know the banjo bolt torque spec?
The S kit, which looks like similar Brembo Calipers, lists 18-24 ft-lbs.
I believe the 03 Cobra shop manual lists something like 40 ft-lbs on the factory PBR's...
SOLD
I have for sale a new Killer Chiller with all of the fittings, mounting plate, clamps, instructions, etc.
It comes with everything as it was delivered from Kincaid.
I believe it is a generation II set-up. The serial number range is 030200 if you want to run it past Kincaid but I am 99%...
I need 1 x wrist pin wire lock retainer. I'm putting together a display piston and rod but misplaced one of the retainers.
Does anyone have one they could throw in an envelope and send me?
Should look like this.
http://thumbs3.ebaystatic.com/d/l225/m/mGJydy8m2UcXf32K_g70CCQ.jpg
Please PM or...
Over the winter I upgraded the Eaton to a Posi, BAP, 60 lb injectors, SCT B2600 MAF, Cooling system mods, 4 lb caged lower, etc. Justin got me setup with a SCT X3 with tune and once loaded she fired right up. This was back in January. Fast forward to the end of June and this was really the first...
Same here. Stock clutch, Steeda quick release quadrant, Steeda firewall adjuster, home made freeplay mod. I installed the MM pedal lowering kit and could not get a good adjustment. With the clutch pedal adjusted to the same height as the brake there was no way the pedal would go low enough to...
First up is a not too common cold air intake by Densecharger. Basically it bolts on in front of your stock MAF and relocates the air filter into the fender. It has carbon fiber like accents on the tube and on the plate that separates the engine compartment from the inner fender. Includes all...
I have for sale a cog supercharger pulley set-up. I had this for my Vortech set up on a 1991 5.0 Mustang. They are both made out of aluminum. They have some dings from being installed, uninstalled, moved from a couple of houses, stored in the garage, etc. The cog/belt ride surfaces are fine with...
Looking for info on someone in the St Aug / Jax area who has a drive on lift with experience welding on frame connectors. Check out these photos here for awesome welds that I will use if no one closer. This individual is outside Orlando who welded these on. I think they look great just looking...
Hi guys!
I am looking for a stock upper Lightning 2.93 pulley. Must be OEM Ford piece in good condition. If you have one please send me a PM or Email.
Thanks!
SV
Hi guys!
I am looking for a stock upper Lightning 2.93 pulley. Must be OEM Ford piece in good condition. If you have one please send me a PM or Email.
Thanks!
SV