I need help from the SVTP community pinpointing where my oil leak might be.
It seems to be coming from the passenger side er well the ac compressor seems to be slinging oil onto the plastic piece between the engine bay and wheel well.
However there is evidence of oil around the oil pan and...
UPDATE******* I will donate all funds received from this sale to my co worker who's 2yr old is in the hospital and has been off work for 3 weeks and many more to come. PM me for details and link to the gofundme page
Dual FPDM, bought it off here, used one season then went return...
Any help would be appreciated. I need a new set up in a bad way, and i love the sound of the red cobra at 2:08
thanks Jay
https://youtu.be/5Y9nvxqnQTk?t=2m
Any one use these, or have any they suggest?
Ill be re doing all the flooring in the main floor of my house. Changing out the carpet and Laminate to Real hardwood. Problem is my Cable comes up from the basement to about 3" off the wall. I don't really want to hack 2 walls open to be able to get...
Wanted to get an idea of where everyone is at with their plug gaps and what plugs they are running on their ported set up. Im running 14#'s with tr6's gapped at .030 and still getting blow out.
EDIT: I guess it would help to add that it also get a P0300 code, and an evap code P0453(can remember...
To post my personal version of "Guess My HP"
I know its not a termi, but she is a Heaton 4V
My dyno it Tues the 19th.
-Fully built Teksid
-Kellog crank, 03/04 rods
-01 4v heads and cams degreed with cloyes gears
-BTR Valve Springs
-13cc Wiseco's
-Stage 5 Steg with torque plate removed
-2.93...
i just got my engine and tranny into the car, I noticed that the transmission seems to be rotated on the bell housing/block.
Is this normal?
Any suggestions from anyone?
Its a Mcleod bellhousing
thanks Jay
CR and Boost Ported Eaton 94 octane
Have a question for you boys.
Im in the process of building the engine and car in my Sig. The machine shop told me the other day that the std bore pistons i ordered won't work as the bores need to be cleaned up, and ill have to go with a .020+ piston...
Have a question for you boys.
Im in the process of building the engine and car in my Sig. The machine shop told me the other day that the std bore pistons i ordered won't work as the bores need to be cleaned up, and ill have to go with a .020+ piston.
Now i recently found out that i have 94...
Diamond -11.5cc std bore pistons with h13 wrist pins, total seal rings, spirolox retainers
I am selling these because it turns out my block needs to be bored .020.
These are weight matched to each other. never installed or run.
i have over $1100 into these. I would like to get $850 out of...
Diamond -11.5cc std bore pistons with h13 wrist pins, total seal rings, spirolox retainers
I am selling these because it turns out my block needs to be bored .020.
These are weight matched to each other. never installed or run.
i have over $1100 into these. I would like to get $850 out of...
Diamond -11.5cc std bore pistons with h13 wrist pins, total seal rings, spirolox retainers
I am selling these because it turns out my block needs to be bored .020.
These are weight matched to each other. never installed or run.
i have over $1100 into these. I would like to get $850 out of...
Can someone help me out with the size of bolts for the coil covers and IAT2 sensor?
I got the covers powder coated and they need to be tapped, unfortunately i have so many bolts laying around that I'm not sure which are the 4 i need as nothing wants to go into the holes.
The Eaton swap i...
Each party pays their own shipping.
May consider silver pulley.
Does no include hub only pulley. Not sure on usage but aside from the knicks in the picture its in great condition and i would like the return piece to be of equal or greater quality
Thanks Jay
Hi guys
Im in need of some parts to finish off my swap 03/04 eaton Stuff
IAC Valve
IAT2 Sensor
Throttle/Cruise Cable Bracket
Thanks a bunch guys. Email me for a quick response
[email protected]
All parts would need to be shipped to Canada
Thanks Jay
Doing a 4V and Eaton swap on my 2000 GT and need a lil help on the vacuum and boost lines.
I need to purchase some material to route everything properly but don't know the size of hose i need or connector size
any help would be appreciated
Thanks Jay:beer:
Can anyone tell me if the transmission will still be Removable with these headers? Only reason I'm leaning to BBK's is I already have the mid pipe i need as i had LT's on the 2v i pulled out and its just an extra place to save a couple bucks on my build, but i don't want to sacrifice...
Hey guys.
Im in the purchasing stages of my build and i want some suggestions on what direction to go with transmission( i REALLY want to stay manual at this time)
My car is a 00GT that is getting a build 01 cobra engine(already torn down). I will be running a single turbo, nothing crazy to...
I was on my way home from Grabbing my Ol man at the Airport and going to the mall with him and my lil girl.
On the drive home i was going pretty quick 130km/h when i notice a white civic SI (newer maybe a year or 2 old) come blasting up on me so i pull into the middle lane and look over ass...
i Just purchased an 01 cobra 4v and im stripping it down to re build it. It only had 32k km's but has been sitting for ~5yrs and i want to make it fully forged.
my question is
Im planning on having the heads gone through, new seats, stiffer springs iff needed, but what i want to know if...