Just curious...I have a Tri-ax now and it's good, but it's the only aftermarket shifter I've had any experience with and I'm wondering if the MGW is really THAT much better.
My only concern (and it may just be the angle of the pics I've seen), is that the shift boot ends up looking like some...
Cool down before the first run was about 45 minutes....next two were back to back...
This is the one and only tune I’ve ever gotten from James...Given my mods (in sig), should I be pleased with results?
Looking to get a shifter bezel but don't want anything too 'blingy', just something to dress up the interior a bit and give it that 'it should have come that way' look....anybody got good pics of ones they'd recommend?
Man, that blower snout is like a freakin’ piece of soft clay! I THOUGHT I was being so careful while removing the stock pulley. WRONG! I now have some nice gouges in 3 places on the blower snout. :mj: I used a silver Sharpie to cover them - it actually almost matches, but you can definitely see...
I’ve searched and can’t seem to find a definitive answer to the following - how much belt dust is too much?!!
I’ve been about 300 miles since installing a BF 2.93 non-slip pulley w/4 idlers. Belt is NAPA (Gates) 080751. The tensioner is in the middle of the two stops and everything appears to...
SID (Search Is Down) post -
I seem to recall others complaining of noises coming from the front of their cars. Some have described a ‘clunk’, others a ‘creak’. Mine is a definite creak - especially noticeable at parking lot speeds when turning the wheel.
Who else has had this? And what is...
Am I the only one slightly bothered by the fact that the 9 o’clock position is farther away than the 3 o’clock position? If you haven’t noticed yours lately, look again.
Anybody know of any cool dealerships in the Southeast (preferably w/in 200 miles or so from Memphis) that -
1) have at least one Cobra in stock
2) will knock a bit off sticker and..
3) will offer zero percent financing for 72 months?
It may be asking a bit much, but it's about the only...
I just installed the K&N F.I.P.K. today. Easy enough. I knew to leave off the screen and not to drill the hole. However, when it came time to line up the heat shield, I had (am having) a bit of a problem. It just doesn't seem to want to line up right. It wants to point down at too much of an...
Installing Tri-Ax shifter and MGW handle...Anybody with this setup install the MGW handle on the 'lower' holes of the shifter?
If so, did you also install the 'inner boot' from the factory shifter? And what about the big washer that goes over the shifter from Steeda? Is it still necessary...
Exploring exhaust options...rpmoutlet.com appears to have a decent 'combo' price on Stingers + Bassani x-pipe w/cats ($999).
Just curious...who has installed this particular combination on their Cobra? Any regrets? Anybody try to kick you out of your neighborhood for it being too loud...
Probably covered many times before, but is the quadrant/firewall adj. mod considered to be ‘warranty friendly’? From what I’ve read, it’s only a matter of time before the stock TOB bites it. Seems a shame to not be able to get it fixed under warranty....
Anybody experience a creaking/buzzing noise that sounds as if it’s coming from the rear deck lid area? Pretty much all the time at idle or a little above? I know these cars will make some noise but this is a bit extreme! Just wondering if this was a ‘common’ noise with hopefully a ‘common’...
My new car has some kind of milky, hazy residue on a portion of the windshield...looks like someone wiped a dirty rag across it. Only problem is - it freakin' won't come off!! First tried Windex, then Goo Gone. Nothing! Any ideas about what it could be and what I can try to get it off? This...
I've got a new '04 Cobra w/less than 250 miles. While dring on a relatively smooth road at a steady speed of about 35-40, I'm hearing an intermittent 'tink' ....'tink'...kinda like the noise a car engine makes when it's been turned off and is cooling down - but louder. Other characteristics...
Just bought new Black Cobra. Man, is it beautiful! No pics since is currently unpresentable -- dirty w/swirlies in a few places.
I've decided an orbital buffer is a must have for this car. Anybody have a good recommendation for one? One that would do a good job and not let a 'beginner' like...
Any strong opinions for/against Torch Red? I'm looking to get an '04 Cobra and none of the '04 colors really do it for me. Dealer currently has white, black, screaming yellow, and torch red. Can I go wrong with red?