I owned a 2001 Cobra and replaced a lot of parts with aftermarket pieces at approximately 2,000 miles. So these items are basically new and have been sitting in my garage for almost 13 years. :shrug:
Stock Manifolds
Stock H-pipe
Stock Catback
Stock Springs
Stock Gears
Stock Air Intake
If...
Someone posted this on FB and I hadn't seen it here on SVTP so thought I'd share. this adds the sequence function (stock: only does it with turn signal) to braking, hazards and arming the car. Not a big deal but worth a share.
Link:
2010 - 2014 Mustang Sequential Tail Light Sequencer |...
I wont need to start the car (obviously since the show is indoors) but what is the best way to power a cars accessories (radio, interior lighting, underhood lighting, etc.) for an extended period?
Can I use a battery tender? 120v to 12v inverter? Any advice will help. Electronics are not my...
So I am having wheels built and the dust cap is huge on the front of these cars. Are there any options? Leaving it off, finding lower profile caps, etc.? Has anyone ran into this issue? I'd say the wheel seals out any weather quite well, so even though I dont want to go without the cap, I don't...
So I've had the LED fog light bulbs that came out last year that looked great and matched the HIDs better but lit up next to nothing. Then I switched to the much improved 30w bulbs that Bob's and Van has.
Now I noticed on fleabay, there are 80w versions with Cree diodes. I'm no electronics...
So after months of nagging, Flowmaster finally developed a GT500 axle back kit and sent me out a couple prototypes to test out.
Fit and finish:
409ss construction with polished 4” tips and stock-style side-slash cut tip design. The kit is a prototype due to the quad tips but the mufflers...
Anyone out there have connections with or able to make billet parts? I have a couple designs to replace the cheap plastic harness inserts in the recaro seats. Clear powdercoated, annodized, or color powdercoated, it would make for a very nice upgrade to the interior. There is a company that made...
A friend's '04 Terminator Vert with 2.3 Whipple, 3.73 gears, full exhaust, yadda yadda yadda... ran with me from 30mph up to maybe 120. His car dynoed at 600 rear wheel hp. Though it's in my sig, my car has JLT 127mm intake, Lund Tune, and offroad Hpipe. Suspension is springs and relocation...
Given the 5w50 oil required by Ford, we pretty much have to order our oil. Shopping around on the internet resulted in prices north of $100 for Motorcraft oil and filter. Some of those were for the older model and only had 7 quarts. Others had 9 quarts and were $119+.
Anyways, the webpage...
Anyone else notice this?
When going in reverse and turning sharply, like when backing out of a driveway or tight parking space, my front wheels are binding kinda like a truck does when it's in 4 wheel drive and you steer sharply. The front end actually binds, pops, and bucks just like a 4x4...
Any 2013 Shelby owners in California (around area code 951) on here? MAC needs a car to develop an exhaust system. I like MAC and the powerchamber offroad intermediate pipe but I am not close to them. See info emailed to me below...
Hi Casey,
Yes we are looking into making a Axle Back...