Automatic 4.6 DOHC mach1
Pay for the motor transmission rear end and take the rest with you.
$3000.
Has some mods if you are interested please text me at 206 316 7617
I would rather see someone put together something cool then it sit and wait for me to get around to it.
The car is in...
OK I did a header swap and forgot to put the oil dipstick back in while doing the install. ( I feel like a dip stick at this point )
Anyone used a aftermarket oil dipstick? not worried about the $ I want it right and don't want to take it all apart again. I did not have this problem installing...
Who make the best converters and why? Any of you used them what was your et change? This is my daily driver and not a race car but I keep getting told to put some 3200 stall in it. Now I am not sure but have been told the Mach has a ok converter stock. Help me out guys
Ok I have a SCT tuner and need some help with it as I got it used.
I have
cat back
intake spacer
throttle body
cold air
Looking for anyone who has had there car on a dyno with similar mods to help out with setting the timing and fuel.
Also for the Auto transmission what did you set that at...
Have any of you put a 2003 Cobra motor in your car NA before? Long or short block? I have a Mach1 I am thinking of doing this to. Curious as to how sluggish the car was if the gas mileage was horrible with lack of compression etc
I need a good input and front plate/bearing retainer. I would like to buy a broken but complete t56 for extra parts
In Washington 98042
please PM me with anything you might have
Thank You, TerminatedGT
I am seeing 2.2 KB cars running as hard as some of the 2.9 whippels why.
I have been considering going the rout of a 2.6 KB is there any reason I should not?
What blower do you prefer ans why?
Looking for mods to help with mileage. I have 3.55 gears now, BBK throttle body, flowmaster cat back and Maf forward cold air I stole from my old GT.
I know keep my foot out of it but looking for high 20 mpg and right now sitting at 21 average. Any info on fuel saving mods would be really nice...
So I got hurt at work and on LnI so I put my DD up for sale to help pay some bill's.
I am going to be driving my auto Mach 1 when LnI finely says to go back to work. My question is, has any one put 3.08 or 3.27's gears in there Mach or any mods besides a tune that really helped the mileage of a...
So a good friend of mine has been running these and is claiming power and mileage increase. If this it true right on but I want the opinion of a few that have tried this not just one. I have watched a engine dyno ( 7 tq increase ) on a sbc and a chassis dyno ( 12 hp ) that both show increased...
I am a member on Copart just checked the list for a fox to use for a shell. Anyone in Calif there is a T-top car going for auction 9-16-14. Red, cowl hood, cobra intake but never mind that it is a 87 T-top car someone buy this.
:rolling:
Sorry posted in the wrong spot got excited
cool project...
Out for a test drive with the new TFS motor. I went by a friend of mines place and he was jumping in his C6 with his girlfriend the car has exhaust and just a few minor bolt on. I was on my way to the gas station as I still have year and a half old 89 oct in the tank of my beater fox. I could...
are there any mods to doing this swap? I have always used Cobra stuff
94 spindles 99 calipers seem to be hanging up, the car drove in with Cobra brakes swapped them back to GT brakes and they don't seem to be releasing all the way. To me it sounds like a master cylinder failed. However the...
It seems the NA guys like the 96-01 cobra cams in the Mach 1's but what about those cams in a terminator?
Anyone on here done this and what out come did you get, better or worse?
I have a set of 99 cobra cams I was thinking of using while one of my termi motors is apart but if there is really...
OK so looking to see if anyone here has this combo. Looking to see how much power you made and your et. Only looking for those with tfs top end kit and tfs pistons 10.1
Will find out shortly motors in the car and will post untuned base line #'s when I get them
ISF vs Stang
www.youtube.com/watch?v=YkDFvwN2h1Q&list=UUlWWQ7T-TK6GzBDtvyStWyw
www.youtube.com/watch?v=DIJQxnh7eVY&list=UUlWWQ7T-TK6GzBDtvyStWyw&index=37
Boosted BMW M3 vs V6 civic vs Stang
www.youtube.com/watch?v=FZ_Xcn8H0Vg&index=33&list=UUlWWQ7T-TK6GzBDtvyStWyw
These are all fairly old but...
Guess the HP and TQ on this combo
04 cobra bottom end
99 cobra heads and intake cams
ported eaton ( no intercooler )
8-10psi
150-175 wet nitrous kit
bbk twin 65mm tb
x pipe and flowmasters
will be running threw a automatic and sra
reason for low boost pressure is I dont have all the...
So looking in the rear view a beautiful new edge Roush that was quickly approaching. Fish on, we go around a corner and the honks start ( started giggling like a little kid it's been a while ) the Mach in 2nd, honk three rang out from the Roush. The Roush came alive, just about that time the...
any terminators out there running 99 Cobra heads there are a few of these cars that have had issues I'm wondering are these heads better do they not have the issues do they have the issues is there any loss or gain of power from running themthey seem to be a much cheaper way of putting my car...
So with a few minor bolt on's the car is in the 11's on 255 street rubber. Not uncommon for a 03 but one of the track rules is that you need a SFI approved harmonic Damper on anything running under the 11.99 mark. Are all SFI dampers created equal I would not think so, so looking to see what you...