Search results

Hey guys coming down to mustang week so thought id bring down some stuff kicking around the shop here. Accufab single blade with gasket - $300 Mcleod Mustang 10 Spline Street Twin Clutch Kit w/ 8 Bolt Aluminum Flywheel (96-04 Mustang GT ; Bullitt ; Mach-1 ; Cobra) Brand new - $1200 Bassani...

Hey Guys I am flustered and losing my mind. I installed a JLT high boost with my whipple 2.9 and accufab TB. Got the car tuned by three different tuners and still wont drive or idle right. When I switch to the JLT RAI the car idles a lot better....What is going on? Id be happy to send you my...

Looked under the car yesterday have a puddle of coolant underneath. So drove the car up on ramps and took a look. Front of the car is dry but the rear at the front of the beelhousing for the tranny is wet and around the back of the oil pan with coolant. Seems to be coming down somewhere between...

Hey Guys, I have sent John numerous emails but have not heard back yet and it has been over 3 weeks. I received this order 3 weeks ago and opened up the rims and 2 of the rims (18x10's) have obvious issues. The first one has had the center bored alot bigger then the other 3, so the center...

As the title states, please let me know what you have and how much. Thanks

I have lethals budget return system on my car with the 2.9 whipple. We have tuned the car at at 50lbs static pressure. The vaccum line is tied into the FRPS but the vaccum line is capped off on the regulator. My tuner says it tuned with a constant 50lbs of fuel pressure going through the return...

Just a heads up, I just got my car back from the tuner and he told me a few things that dissapointed me alittle. The only 2 parts that i am having problems with are the ones I bought off of here from seperate members. Know im not accusing anyone of anything but it pissed me off alittle that when...

I Just got my car all tightened up. I installed the front diff bushings from FTBR to lift the front of the diff all the way up like explained in the video and also installed a FR Diff cover for reinforcement and swapped out the the IRS bushings on the frame for MM Ureatane bushings and put the...

Ok I got my car tuned with the 2.9 whipple and budget return. Now my question is when i was driving the car and give it some gas so i start building boost (around 7-9lbs) the wideband says 14.5 -15.5 and then once i make over 10lbs it starts to drop to 12 -11.5 and then at 17lbs its good at 11.0...

Hey guys just got my build finished and tuned and took the car out to give her a spring wash. Well got it home and put it in the garage till tonight. I took a friend out and gave her to WOT pulls in 2nd and 3rd and the engine light came on. P0352 IGNITION COIL ”A” PRIMARY/SECONDARY CIRCUIT...

Hey guys just wanted to pass on some useful information for anyone installing the FRPS on the budget return system on there cobra. You have to machine the fitting alittle to help press on the sensor or it keeps ripping the rubber grommets. I went through 2 sets before deciding to take the sharp...

I have looked through all the threads and cant seem to find my answer. What belt is used for stock everything and a whipple 2.9 with the 3.5 pulley. It says use stock belt but there is no way it will work. Can someone send me part#'s for gates/gatorback and what fits properley. Thanks guys...

Just finished installing my 2.9 but im left with the 2 lines that used to go to the old boost actuator on the original tvs. What do you do with these? block them off or remove them or what. The actuator on the 2.9 has one line that runs into the bottom of the blower already.

How much boost does a 3.30 make on a whipple 2.9 through stock manifolds and full catted exhaust (bassani)? RR doesnt make a 3.5 pulley thats why im asking.

Looking for a RR 3.5 pulley for a 2.9 whipple and a JLT High boost intake let me know what you have.:beer:

Anyone looking to upgrade and want to sell there 2.9 Whipple. Please let me know.

I Like to buy a BF 2.76 Pulley and hub for stock eaton Prefer Red if anyone has one for sale.

Ok I have everything undone but the diff is stuck in the bushings conected to the lower brace. It is the first time I have done this how can I get the Diff out, i wiggle it up and down and it moves alittle but i cant get it out. The IRS is still in the car. Any info would help.

I would like to paint the bezel in the middle of the car (The one around the radio and heater knobs) The same red as the door pieces on a 10th anniversary cobra. Has anyone done this and what is the best product for that.?

So I recintly bought my 03 Anniversary Cobra and have started moding her up. So far heres what I have MGW Short throw K/N Cold air Bassanni X pipe and cat back A/F and boost gauge in speed pod Tinted tails/headlights H&R Race springs 2.76 Upper/100mm tensioner Lethal Intercooler tank...

Hey guys, been waiting for 8 years but i finally found the car Ive been waiting for. Just Picked up a 03 Black Anniversary Cobra with 42,000 kms (26,000 miles) all oem other then a bassani exhaust. Starting to save for a whipple 2.9 because i have always wanted a 600hp cobra and nows my chance...

I have been on here for alittle bit now looking to add another pony to the stable, but it seems that no one on here is willing to budge alittle on what they want for there cars, it seems my $21,000 dollar budget doesnt cut it, which is quiet surprising. Id like to buy cars from fellow...