Search results

iCloud As you can see, coming from my wideband it is reading the correct voltages for an autometer 0-4v. It hovers right around 2 volts at idle, and that is all the way down to the pins of the FireWire cable. But when I plug it in to the x4 just to read voltage it shows it idling around 3.4...

Hey guys, I’ve done a bunch of research and can’t get a straight answer for datalogging. I have an autometer c2 wideband, sct x4, and livelink. I contacted sct and wired the red FireWire cable to the positive analog out on the gauge, and the black wire to the negative analog out from the...

Hey guys, so I’m still in the process of tuning the Mach, but running into some issues. Car is running a ysi with a 2.95 pulley and a 15% crank pulley. Had some belt slip issues and just put the tightest belt I could get on it, figured it would get rid of what was going on, but it didn’t. So...

Does anyone else’s EGR valve make a hissing noise while it’s idling? I can’t tell if it’s leaking, it has holes around the bottom of the frame under the round daiphram, but I don’t remember if it’s supposed to make a hiss noise or if it’s not good... I hit it with a shot of propane while...

I’m just now getting a startup tune for my car after about a year of sitting, still dialing it in. While it’s trying to idle, the boost gauge is reading 5-10in of vacuum and if I tap the gas it actually goes down showing more vacuum. It will go to around 15-17in of vacuum if i tap the throttle...

Hey guys, finally got my 3 bolt timing cover and ysi installed on the Mach 1! I’m going back and forth about piping size after the head unit. I have a pmas hpx-e made for a 3.5” pipe, so I was thinking I’d run 3” from the head unit to the fmic, then size up to 3.5” from the intercooler outlet to...

***Update 6-12-20*** i will now be adding my Paxton Air to Air front mount intercooler, all piping to intercooler and from intercooler to throttle body, 3” hpx pmas tube and hpx pmas slot style MAF, custom coolant crossover tube to fit supercharger, and two Ford Gt Supercar fuel pumps. -you will...

Hey guys I installed a set of wilwood 6 piston caliper brakes and bigger rotors on the front of my Mach and my abs light came on. I’m not sure where to check or what’s going on. Any ideas? Has this happened to anyone else?

Not sure where to post this, but my electric autometer c2 boost gauge and fuel pressure gauge have been acting up. The boost gauge still sweeps, but the zero out function doesn’t work. When I start the car, the gauge sits at like 20 something pounds of boost at idle. The fuel pressure gauge...

I looked through the forum and couldn’t find anything so I wanted to see if anyone knows the correct belt size for a Mach 1 with a single bolt tensioner, vortech 3.1 pulley with a 7.5” crank pulley and a thump tensioner? I had a 112.4” belt, but it still is eating the belt when I get on it hard...

Hey guys, I’ve looked everywhere and read pretty much all the posts with belt shredding issues, but the belt on my Mach 1 keeps shredding off the inner rib. I had two shops work on it and both said the pulleys were aligned correctly but it kept shredding it. I finally got a laser alignment tool...

I have a used Playstation 3 for sale in perfect working condition. This was one of the RARE original Playstation3s to come out and is backwards compatible with Playstation and Playstation2 games(plays all 3), and still plays blu-ray discs. When I got this PS3 I had it upgraded with a 250gb...