A friend of mine bought an Axle Exchange one piece aluminum driveshaft for his '08 GT/CS and ran that with a TR6060 for a couple thousand miles. He is now selling it because he is converting to auto. I planned on buying a DSS or other one pc aluminum shaft in the spring but he offered it to me...
I am getting some new rotors and pads shortly for my car and am pondering painting the Brembo calipers red. Still not sure as I don't mind them being black but just wondering how anyone did it (what paint or process). Also, how would I go about getting another Brembo emblem?
Every so often I see this topic pop up and I was also in the same boat a few months ago. I acquired a 2014 bumper from a great member on here and a lower valance from another guy to do the swap. I decided to try something a bit different and modify my stock 2011 valance. I ordered a set of...
I'm in the midst of installing Magnaflow Competition quad tip axlebacks (for '11/'12 GT) on my '11 along with a 3" Lethal off-road X. I haven't seen too many youtube clips with these mufflers on a GT500 and with the off-road X. Even so, Youtube isn't the best way to hear true sound. I...
Over the winter/ spring I will be converting the rear of my 2011 to a 13/14. I have already installed the tail lights but will be getting a bumper cover/ valance and finally an exhaust. Right now I have a stock exhaust on my 11 except for Roush axlebacks. I'm going in the direction of an...
A buddy of mine (on here) did the conversion on his 2010 but was fortunate enough to score a complete rear including the bumper cover, diffuser and skirts. After being around another friend's 2014 and his 2010 done, I am thinking of doing the same. My question is can I use a base 13/14 bumper...
Finally got around to installing my BMR UCA, LCA's and relo brackets along with Koni yellows on all 4 corners. I started off with adjusting the Koni's to 2 full turns. Ride is pretty darn stiff and was wondering what anyone else typically has theirs set at?
I installed an Afco dual fan HE last year and have just scored some 2014 grills to install on my 2011. Where the pump is now, it will stick out like a sore thumb so I'm looking to move it to the driver's side. I have seen VMP's kit that is included in their HE (the alum bracket and extension...
'Enormous' and I are trying to figure out something. I ordered Koni yellow sport adj shocks and struts that are currently on sale at AM for my '11 SVTPP. I caught something after the fact that the struts say- 2005-2010 "All" Mustangs. I've browsed some other forums trying to find out the...
Has anyone with a pre- 13/14 GT500 upgrade to a 15" rotor and 6 piston caliper from say...a 13/14 swap? Looking at a 15" Baer set and perhaps a 6 piston caliper from someone selling a brembo they've upgraded on. Any opinions?
Thanks!
Has anyone with a pre- 13/14 GT500 upgrade to a 15" rotor and 6 piston caliper from say...a 13/14 swap? Looking at a 15" Baer set and perhaps a 6 piston caliper from someone selling a brembo they've upgraded on. Any opinions?
Thanks!
I have 2 questions if anyone can chime in...
I am going to tackle installing at least part of my BMR stuff this weekend (adj upper, relocation brackets and LCA, driveshaft loop). I want to at least do the LCA's for now seeing that I'll be lying on my back in the garage. The upper might be a...
After about 9 or 10 months of gathering parts (yes, I actually had to save up and stay disciplined!), I have finally finished my TVS swap. This year's changes include the TVS, painted coil covers I did myself, 65mm FR TB, 123mm carbon wrapped JLT, injectors, VMP 2.4 pulley and idler, xd...
I just finished painting the "5.8 and TVS" on the supercharger with high heat emamel after prepping. I don't want to paint the rest of the supercharger and would rather keep it looking factory but was toying with the idea of making it a little different by spraying a couple of light coats of...
I'm doing the typical TVS conversion into my '11. I've almost hoarded most of my parts before it heads over to Steeda in the spring for the install and dyno/tune. I'll be running the FRPP 65mm dual TB, 123mm JLT, 56 lb injectors, 2.4 pulley and 90mm... C&R Shelby HE...and that's about it for...
Following in the footsteps of my good friend and forum member Enormous, I have decided that because I like my SVTPP wheels but want wider rubber, I am taking my rims to Weldcraft. I'm going from the current 9.5" and widening to 11.5" to fit a 325 Dunlop. Enormous went with 11-3/8" and it fits...
Just wondering if anyone else has experienced this problem. I bought a Roush axleback system one year ago and have maybe 3k miles on it. Both mufflers are rusting in a couple of spots at the bottom. I know it's likely due to the design and how moisture runs and settles but this is a bit...
Anyone making the trek to Carlisle in June for the Ford Nationals? I've had Mustangs for years but never went for some reason. This year will be my first and I'm heading there with some fellow Mustang owners from Ontario. Looking forward to it as it'll be huge I imagine! I've taken my T/A to...
I've enjoyed my Shelby so far but now getting the itch. So far, I've only put on the FRPP resonator delete and Roush axle back mufflers. These mufflers are l-o-u-d but I am looking for more. Near future mods will be either a VMP or Steeda power pkg (2.5mm pulley/90mm; 123-127 JLT CAI; tune)...