Been a while, but the old girl has developed 2 leaks near the bottom corners of the rear glass on the vert, just curious on who makes or carries the best replacement top?
Thanks
Hey guys, I have an 03 turbo cobra with a 01 cobra alternator, just curious on a couple things. I'm running I believe a 6.75 balancer, with a 2.2 pulley on the alternator at a max engine rpm of 7000, and that's spinning the absolute crap out of it like 21000 rpms. I would need a 3.0" pulley to...
Hey, just started having a battery light issue where if I leave my car parked for a couple days, start the car I get a battery light, I then pull out the multimeter and it's not charging the battery. So I then pull off the negative battery terminal and leave it for a while, come back and hook up...
Hey, guys I had a pilot bearing go bad, so before I fix that and put the clutch back on I'm wondering peoples thoughts on the condition of my dyad clutch. It looks good to me nothing sticking out saying to me its bad, just looking for some opinions to make sure all looks good before I put it...
Hey guys, just recently noticed that after a pull, when I let off I looked back and noticed some smoke in the rear view mirror during the pull its clean just after letting off this happened. It wasn't a crazy amount but enough that it made me pay attention to it.
I'm going to check for shaft...
Hey guys I'm just curious if switching from stock rear bilsteins and steeda lowering springs to a set of the new viking rear coilovers, would be of any benefit to helping with some traction on the street. The car on with r888r's on the back does a lot better than I thought it would but I'd still...
Got my what box installed and working, but now if I 2 step for 4 seconds my car throws basically all the misfire codes, do I have to get my tuner to turn something off? A quick 2 step no codes, if I sit on my 2 step to build boost I get the codes. I have a single turbo 03 cobra, takes 3-4...
building boost off the 2 step, I have my meth come on early at like 4psi, turbo car. I'm installing a wot box, I'm just curious if I use the 2 step and build 4+ pounds of boost, the meth will start spraying is this going to hurt anything, foul plugs? or bog? because of the spark cut on the...
I have a single turbo cobra, running 19 psi on 94 plus water/meth, with an 03 mach 1 intake. The car is essentially a dd street car, makes good power I'm just curious if switching to a sullivan lower with an hpp upper would be worth anything or a waste of time. I might be going with a larger...
Hey guys, this just started happening to me on thursday I made a hit the car sputtered and then continued to pull, but the weird part is the car is suddenly extremely rich and wot, 10.0 10.2, when its usually in the 11 range.
I logged the car tonight and it was doing the same thing only worse...
Just wondering if the max volts to set this at is between .96-.99 volts or if that s just a myth as a bunch of people have said and you can go all the way up to 1.1 volts, I keep reading different opinions on this and they usually end up in an argument. Just curious if the .99 max is truly a...
Hey guys just curious if it's ok to completely get rid of the inserts where the two screws go to get more adjustment out of the tps? or do you need to keep them, I need a bit more adjustment are these strictly for strength?
Hey guys, looking for advice, Put the car back together new motor, cams, and fired her up. car is throwing the mystical p0340 code cam position sensor. After doing some reading I've learned that adjustable gears with the allen head bolts to adjust can cause a false trigger. I tested the...
I'm putting my motor back together right now, and I just finished putting the exhaust manifold back on with new oem gaskets. My question is, the gaskets have pressed style rivets, so on the outer ports of the manifold the rivets push away from the manifold a bit is this normal, or do you guys...
Just wondering if anyone has thought about running a 4" diameter magnaflow hi flow diesel catalytic converter, to get rid of some of the smells catless cars make? I'm running a 4 inch exhaust from the turbo to cat back. Will this flow enough/last long?
Just wondering if anyone knows the exact sizlmre bolt that is used for the 2 vertical bolts that connect the transmount to the transmission? I see that LMR has a kit but I would rather just go to a local store rather than placing an order to the states for 2 bolts.
Hey guys just wondering if anyone knows if these guys went under or what? They owe me money on some returned parts, and I've been trying to get a hold of them for 2 weeks and they are apparently always closed now according to there phone recording.
How many of you guys or gals have used some of these big companies, sent in pistons or heads and have been lied too day after day week after week by them. It's blowing my mind right now I sent some parts in to a company won't mention any names yet and was guaranteed 7 to ten days for the work...
Hey guys, I'm getting ready to put my motor back together, single turbo 03 cobra iron block. I'm just wondering wheres the best/cost wise to get a gasket set, and some arp bolt kits to put my motor back together. I've looked at modmax, and mmr so far?
Hey guys I'm beyond frustrated trying to fix my leak that appears to be behind the oil filter adapter block. I drained the coolant and took the oil cooler and adapter off. Put on the new gasket "blue" rings, which ford has now made black.
Ran the car a bit to burp the coolant, and now a...