Search results

  1. asierra1

    Running out of fuel

    I need a little help identifying an issue. My car more often than not runs lean around 4500-5000 rpms. It got some bad e85 a while ago, so pre and post filters were changed, as well as the fuel pump. The car ran fine before the bad fuel, so I'm thinking the issue is still fuel related. At about...
  2. asierra1

    Need help. Bolt on lpf lower broke inside balancer

    In need of some help or ideas fellas. A bolt from my lfp lower broke off inside of the harmonic balancer. I tried drilling a hole in it with a left handed bit, then using a screw extractor..... And then the extractor broke in the hole. Then i brought out the jaw puller and had no luck with...
  3. asierra1

    FS: 17in Uni lug Race stars

    thought I'd post these here as well. $1000 with tires plus shipping an pp fees $600 for just the wheels plus shipping and pp fees http://www.svtperformance.com/forums/showthread.php?t=1029295 FS: 17in Uni lug Race stars
  4. asierra1

    FS: 17in Uni lug Race stars

    I'm going a different direction with the car and will no longer be needing these wheels. They are 17x4.5 fronts and 17x8 out back. They have a grand total of ten passes at the track and are in near perfect condition. The lug nuts and washers will not come with sale. I'd like to sell as a set...
  5. asierra1

    Question for anyone stationed overseas

    Hey guys, I just got an assignment to Ramstein, and had a couple questions as far as my vehicles. First off, I have an 03 cobra (weekend car with lots of mods) and a 00 lightning (daily mostly stock). Would it better to take the car or the truck? Also, I heard that American vehicles such as...
  6. asierra1

    Tvs guys, what are your e85 numbers?

    I'm getting a separate tune for my car on e85 in a few weeks. Just curious to see what y'all are putting down. Please list mods and boost numbers if possible as well. Car currently does 612/555 on a safe 11.5/6 afr and 16* of timing. Thanks!
  7. asierra1

    Freshly Built 8.8 and Ford Racing Coil Overs

    Hey guys, I'm selling these parts for my buddy who no longer has his fox. first up: Fresh built 8.8 out of a 93 welded tubes 3.73s limited slip diff moser 31 spline axels 5 lug conversion stock discs stainless break lines stainless e-brake cable $1000 plus shipping...
  8. asierra1

    Review of theusualsuspect's foam mirror inserts

    Review of qick88lx's foam mirror inserts To start, I've been plagued with the "shaking mirror" problem since I took ownership of my 03 Cobra. It has been extremely annoying to say the least. I've caught myself looking through the rear view mirror instead of risking a seizure from glancing at...
  9. asierra1

    Easiest way to get irs pumpkin out?

    Hey guys, The rtv behind my Frpp diff cover finally let go, so I'll be swapping in a lube locker gasket. I was wondering what the easiest way to get the pumpkin out would be. Any advice would be appreciated! Thanks
  10. asierra1

    Bilstien struts FS

    I have a set of Bilstien struts that came off an 03 cobra with 90k on it. I no longer need them and they're taking up space. $100 shipped takes them thanks, Al
  11. asierra1

    Lethal catted x, factory bilstein struts, dual gauge pod FS

    I have here some parts i no longer need and are taking up space. All prices are negotiable Lethal catted x for MAC LONGTUBES with only 500 miles on it before switching to o/r x. Has some minor scraping on the bottom of the cats, but nothing serious. Sold Factory bilsteins. Good condition. Came...
  12. asierra1

    Just did a 105/205 on the Cobra. Errmuhhgurd this stuff is amazing

    I grew a wild hair the other day and decided to do a full detail on my 03 Cobra. Process consisted of washing with adam's car wash, claying with porter cable nanoskin pad, meguiars 105 and 205 compound, pre wax cleaner/polish, adam's brilliant glaze, and finished off with two coats of adam's...
  13. asierra1

    Cracked Intercooler FS

    I have a cracked intercooler that came off my 03 with 128k on it. My dumbass left a 75% water mixture in the system and the temps dropped pretty low. I can have it welded up at the local shop for $30. I'm not sure how much its worth, so make REASONABLE offers. These go for $300 minimum in good...
  14. asierra1

    BNIB Maximum Motorsports C/C plates

    I ordered these a while back when I was going to use a tubular k-member, but plans for the car have since changed due to my upcoming PCS to Korea. The plates are brand new and never used. I merely took them out of the original packaging to take a picture. 190 Shipped takes them heres a link...
  15. asierra1

    Car won't start after sitting for two weeks

    I went out to take the cobra around today since it's nice out, and the sob won't start. It cranks and sputters, and it'll actually fire up for sec, but it'll only run for a few seconds. During those few seconds, it tries to run, but fails. The wideband won't even register anything. All sensors...
  16. asierra1

    Tvs numbers on a safe tune

    Ok so I finally got the car on the dyno and it sure as Hell surprised me. With 16* of timing and a very safe 11.5 a/f, it put down 612/555 at 19psi. I'll be going back for a much more aggressive e85 tune here pretty soon. Mods are tvs 2.3 with a dragon tb, 3.2/4lb, mac headers, o/r x, bassani...
  17. asierra1

    Car starts but runs like crap and shooting raw fuel out of exhaust

    ok guys, I'm lost here. Ive been doing some work on the car off and on as money comes in. I had to send out two injectors because they weren't firing. I got the injectors back a few days ago and put them on the car today. I tried to fire it up and the car turned over once, then i heard a loud...
  18. asierra1

    Will my a1000 make it on a 200 mile trip?

    I'm getting my cobra tuned in Dallas in the near future and I'm not sure if it'll make the trip without overheating. I'm stationed in Shreveport, so it's about 220 miles to the shop. I really don't wanna spend more money but if I have to, I will. Anyone think I could get away without a fuel...
  19. asierra1

    Where to get shortblock?

    Hey guys, I recently bought a 99 and it will eventually become my street strip truck. For now it's my dd, but I want to make sure I piece my build together correctly. Only mod so far is a k&n intake. Some helpful input would be appreciated. Parts I will get soon Obx headers with no cats...
  20. asierra1

    Terminator Eaton FS

    Did a TVS swap, so this blowers gotta go. Its has a 2.9 pulley (unsure of the brand, but has four bolts on it. UPR?). Other than that, its stock. It has 120,00 miles on it, and ZERO problems. Blower oil was changed when i bought the car at 100k. The underside has some oil build up from the pcv...
  21. asierra1

    Eaton fs

    Did a tvs swap, so this has gotta go. It has a 2.9 pulley (unsure of brand. It has four bolts), and other than that, it's stock. It has 120k on it, but has zero problems. Blower oil was changed when the car was purchased at 100k. The underside has a bit of oil build of from the pcv system, but...
  22. asierra1

    Car breaking up when in the boost

    I'm finishing up my TVS swap, and have most of the bugs worked out. One that we just cant seem to figure out is why the car is cutting up under boost. It runs great until about 5 psi. after that, it goes super lean. My wideband pegs as 18. At first, we thought it was the tune, so rick sent me a...
  23. asierra1

    Where did you buy your E85 gas cap?

    I'm almost finished with my build, and I'm looking to add a few finishing touches. I really want a yellow E85 gas cap and a flexfuel badge to put on the deck lid. I've seen a lot of stuff on eBay, but I'd like to know if there's a specific place you guys would rather buy from. Thanks!
  24. asierra1

    Bf 3.1 ring

    Upgraded to a tvs, so this is no longer needed. The back side has some scratches on it, but its completely functional. 40 shipped obo
  25. asierra1

    WTB your old tty head bolts

    I have an 03 terminator block in my living room and decided to make a coffee table out of it. Im not sure of the bolt size, but obviously the factory bolts will fit. Since they arent reusable, does anyone feel like sending me theirs? I'll cover the cost of shipping and pp fees. :beer...

Top