Selling my 2003, Sonic Blue, SVT Cobra
$35k OBO!! Shoot me an offer and let's work out a deal.
I’ve had the car for a little over 3 years now and since then I’ve had the motor completely rebuilt.
Body has approximately 66,xxx miles with about 4k miles on the build.
The car was built by Hugo at...
Hey everyone,
To get straight to the point,
I pulled my blower and lower intake manifold and ordered new Fel-Pro MS96114 for the reinstall. I placed the gaskets down on the head, in their alignment posts, and noticed the rings for the bolts did not line up with the threaded holes in the heads...
Hey all, looking for some help with a new issue and hoping someone has dealt with this before.
Started the car up this afternoon, let her warm up, backed out of the garage, and she died. Tried to fire her back up, but I got nothing. No power at all. No fuel pump activation, no lights on dash...
Hey all, looking for some advice on how to test my issue.
Issue: Fuel pressure drops to 0 after about 2 mins after shutoff.
Need help with how to test where my issue is? I don't have any fuel leaking but from research, I need to test the: injectors, fpr, or fuel pump check valves.
Any way to...
I've got this SOS A pillar with a couple Aeroforce gauges in my 03 coupe that I don't use.
Would prefer to no separate but will if need to.
Looking to get $700 shipped for the SOS and both Aeroforce gauges.
Or,
I've also got a carbon fiber theme going on with my car, so if you've got some...
Thanks in advance for any help, here's what I'm dealing with....
At WOT, I get coolant spraying all over my windshield, out of a factory 16psi, cap. I've also had the issue with a Canton 16psi cap.
Car runs great, coolant temp stays around 176-184 and iat2 stays about 10 degrees over ambient...
Selling my Lance Flathers 2-in-1 dual tank.
Works perfectly, used for less than 3k miles.
Selling due to changing my tank setup.
Comes with 2 factory style tank caps, NOT the brushed caps.
Bought new for $535 plus powdercoat.
$400 picked up or buyer pays shipping.
Sent from my SM-G998U...
Looking for a tubular k member for a terminator, preferably with a arms.
Show me what ya got and we can discuss $$.
I'm located in Northern CA.
Sent from my SM-G998U using the svtperformance.com mobile app
Have a gen 2, 2.3L Whipple with approximately 3k miles for sale.
Comes with the blower, Accufab throttle body, sct ba2400 maf and C&L rai, 2.75 and 3.00 pullies, stock cobra fuel rails and Deka 60lb injectors
Looking for $3k for everything, and im in norcal, gilroy but can meet up somewhere...
**NOTE**
WILL NEED WORK
Spoiler has a crack approximately 10 inches long along the ridge.
Selling the Sonic Blue rear spoiler from my 2003. Genuine factory Ford part.
Does not come with 3rd brakelight.
Spoiler is straight and has all studs. Spoiler is packaged and ready to ship.
Let's go...
Hey,
Looking for aftermarket intercooler/coolant reservoir tanks. Preferably a 2-in-1 tank but will absolutely consider 2 tank combos. Prefer textured black but will also take raw.
Venmo ready. Show me whatcha got.
Thanks!
Sent from my SM-G973U using the svtperformance.com mobile app
Thanks for any input, here's what's going on.....
03 that has no heat and a/c I not working.
Car does not overheat, car does not leak, air comes out of the vents and will redirect (defrost, footwell), I just tried burping and there's no air pockets.....
What am I missing?
Sent from my...
As the title states, who are the go to dyno tuners for the CA Bay Area/Nor Cal?
Just purchased the 03 from NY and need a retune from 93 to 91 octane seeing as 93 is not available in CA.
Also looking to replace my 3.00 upper pulley with the 2.75 on the Whipple.
Thanks for any insight.
Where should i go to get my 4.10 gears installed? I'm in the Kitsap area but willing to
travel to as far as Auburn and Seattle if need be. The few places I called all quoted me
$500 + but forum members say its usually around $250-$300..I called performance
shops, is that why its doubled...
Well, I bought some new rims so it's time to sell the chrome FR500s..
All rims are perfect condition, 17x9 chromies - $100 ea + shipping
Wheels are off the car and ready to ship!
Just had my spec stage 1 clutch and stock flywheel go out and ended
up having to buy new ones. After some searching around I bought a
spec stage 3 clutch kit and a spec aluminum flywheel.
any thoughts or comments on this combo?
So the other day i noticed every time i pushed in my clutch the car would make an extremely strange screeching noise,
the beat is like to pieces of metal intermittently rubbing against each other..scared me...took it to ford today and they aren't sure
won't know what it is until they pull the...
Washed her yesterday and waxed her today using "Black Detailer" by Turtle Wax.
I also got some tire shine on there as well. Opinions and suggestions please.
and how do you all clean up your engine bay real nice?
Well, yesterday was my first day at the track with my cobra (mods in sig). Was a little dissappointed when my runs were a consistent 14.1-14.2. I was launching at around 3k (no irs brace, didn't want to break it) and shifting at 5k...Towards the end of the day someone told me that in a cammed...
If this is in the wrong thread please move.
Hating the chrome look and trying to go for the satin black look. Could someone give me info on how to go about painting my rims black. I know I would
have to scrape off the chrome, sand, primer, paint..I was just looking for suggestions on grits...
Looking to trade my excellent condition 17x9 chrome FR500's for an all black rim. Nothing
wrong with my rims, I just have a black car and think blacked out looks straight MEAN! Considering
all rims, just post a pic, as long as they are all black except
no bullets!
onto the pics
For sale is a set of brand new FRPP 8.8 4.10 gears (M-4209-G410A) opened only to look.
Ford Racing 4.10 Gears (99-04 GT) M-4209-G410A - Free Shipping!
also have for sale a Rear End installation and Bearing Kit (R8.8RMK) never opened. Made by Motive Gears.
Rear End Installation and Bearing Kit...
Saw this thread in the termi section and figured it might not be a bad idea to see what
you guys think...
I know I've got my dyno number posted at 282rwhp, BUT, when I bought the car from a guy
who works at 'The Mustang Shop' he told me it put down 312rwhp but he couldnt provide
any dyno...