Search results

I have a full navigator long block broken down. Was a running engine when pulled and will do my best to describe everything. Any questions please ask. -5.4 navi iron block 75 pick up or buyer responsible for shipping, this thing is very heavy so it cannot ship ups/fedex -5.4 forged 8 bolt...

Im going to list everything in detail about this setup, but if you have specific questions please pm me. Pictures at bottom. Included: 03/04 cobra fuel tank approx 45k miles (cover included) Fore triple Hat Fuel level sender 3 340lph division x pumps 3 lines, for hat to Y block Y block...

I have a full set of 32 beehive springs from comp, the only thing missing is 1 retainer part #249-799-1 from jegs and its 9.99. Just to be clear This is 32 comp valve springs part ##26123 and 31 comp retainers part#799-32. 300 shipped, approx 500 miles on them. Also A reichard racing 2.65...

08 casting 9 thread c heads off a aviator. Look to be in good shape, will have a link for a album with all the journals because its a lot of pictures. No cams, does have valves and springs but unknown mileage and condition on those. Asking 900 shipped to your door or picked up for 750. Album...

I have a pair of Bassani exhaust with dumps, bought them used a few years ago and never used them. Has normal dents and scratches but nothing major. 200 obo shipped.

From a few aviators, i also have some navigator 5.4 parts listed in another sale if interested, will do good bulk deals on parts. Ill do my best to answer any questions or concerns. -(1) upper and lower aviator intake 150 shipped -(1) lower intake only 100 shipped 4v aviator valve covers 75...

180 shipped, 40a boost a pump, had it hooked up but never needed it. PM works best

Looking to part with my current fuel setup: -stock 03 cobra tank -fore triple hat (has 3 separate feeds -6? and one return) -triple y block to accept the 3 feeds into 1. -3 divx 340lph pumps should be good well into 1k+hp and e-85 safe. All you will need is a filter and lines run to your rails...

Car has been sitting for maybe 2-3 months. Put the engine back in got everything ready and now i cannot get the tuner to communicate with the pcm. The car WILL turn over fine, but it will not turn my fuel pumps, fan etc. on. It wont take a tune at all, as soon as i try to load it it just gives...

Mine has been broken for a long time (pulled the knob off) and instead of just fixing the little clip i was considering swapping to a newer mustang switch. Anyone tried this before? My cluster cover is aftermarket anyways so i don't mind drilling a bigger hole to fit the larger switch, and im...

New motor, drove it a few days ago ran fine, drove it yesterday ran fine and i parked it. Went to crank today and it will barely run. When it does it is shaking and barely running at all... Pulled the plugs and every one of them was soaked in fuel. I immediately though FRPS so i picked up a new...

Im getting a pretty bad vibration from either the trans or possibly a loose engine mount. I have some aggressive cams and it only occurs during low rpm idle in neutral and also when taking off from a stop. Im guessing its the input shaft on the trans since its a newer trans i bought from...

Just curious how much vac should i be seeing with comp stg 3 cams, or similar and around 700 rpm idle... Im only seeing around 12 and im thinking that might be low??? I know stock cams should yield around 20 but i cant find any info on larger cams.

Im soon to be getting a new tune on my car with my new motor and have some concerns with my MAF. Im running a BA3000 currently and will probably be surpassing the 825 recommended hp max thats listed on the sct website. I know there is the BA5000 but its max is also listed as 825... I would...

Snow performance meth kit stage 2 MAF version. Never had a drop through it. Was installed on my car and then never run due to other issues with my engine. Probably missing a few wire connectors, and the small tank has some spray paint over spray on it, other than that its in near perfect...

5.4 navi block 150 picked up or shipped at the buyer expense. 5.4 navi forged crank 300 shipped Lighting valve covers, painted black but will need a new coat. 65 shipped lightning heads, dirty and missing some of the valve train parts, still has the cams 125 picked up or 175...

03 cobra aluminum drive shaft might need 1 U joint if i cant find it. 150 shipped SOLD 03 cobra engine wire harness 225 shipped. SOLD (will combine with pcm for 400 shipped.) 03 cobra pcm YDH0 225 shipped. SOLD Stock ic tank 55 shipped. SOLD Snow performance meth kit stage 2 MAF...

A friend of a friend is trying to sell his cobra locally. He hasnt had it very long and has barely even driven it wince he bought it so hes decided to sell it rather than let it sit. I dont know anything about the car other than its in need of a few things, like fuel system to be able to use it...

Now i dont know if this is actually a problem yet but i do know its different than my car was before install. Now my concern is that my clutch fork has no movement forward or back even without the cable attached. I remember before with my stock clutch it had slight play back and forward before...

Anyone on here have a low # 03 cobra? Just curious i think the lowest ive seen was in the 300s.

First off probably my fault alittle, but ive also read on others having this issue too. First problem i had i installed them and then found they were not welded fully around a o2 hole... fixed that about a year ago. Fresh motor goes in today and cranks up nice and fine. After about 5 mins i see...

Anyone know of a company that makes the lower part of the rear bumper(black plastic) that comes without exhaust holes cut? Im open to even a slight change or oem minus the holes. Im going to be running dumps for a while and i hate having the empty hole look back there. It looked to me like it...

Ive had mine deleted for a while now and just left the old extra wires there hanging. Can i clip them off? Or do they need to remain there. Just trying to do the extra tidying up i can while i have the engine out and can route things like i want to.

With work and alot of getting screwed over, one of my cobras has been neglected for the last 2 years sitting without a heart... 2 years ago i had a friend begin building me the motor in my sig. After about 4 months i was expecting to get it back and be back in business. 4 months roll around and...

03/04 cobra pcm YDH0 perfect working order, only missing the plastic cover from the bottom as shown in pics. 250 shipped.