Search results

  1. da28fan

    Billet Aluminum Battery Cage Box for Optima Batteries Unique Mustang Top

    This is a billet aluminum battery cage or battery box for Optima batteries. It has the word “Mustang” cut out in the top, along with the infamous Mustang horse. The base mounts to either your stock battery tray, chassis, or trunk floor. I have an 03 Cobra, and modded my stock battery tray so...
  2. da28fan

    Walbro GSS342 Fuel Pumps (Pair)

    Two Walbro GSS342 255lph fuel pumps. They have 1000 miles or so on them. Priced to sell very quickly. The two male ends of the wiring harness will be in the box, but doubt you'll need them. First $70 bucks for both gets them, shipped to your door, in continental USA. :poke:
  3. da28fan

    Stock Cobra Lower Caged Pulley

    Installed a 4 pound lower on my 03 Cobra. This is the stock lower pulley that came off. Clean, in good shape. $125 plus $12 shipping.
  4. da28fan

    Best Clutch Fork for 03 Snake?

    Looks like the squeal has started, so gonna drop the tranny for a fix. Getting Ford Racing TOB, retainer from Lethal, pilot bearing, and a new clutch fork. But what's the best clutch fork? Lakewood seems to make a nice one, but it's an inch shorter and don't need an even harder clutch (will...
  5. da28fan

    Walbro GSS342 255lph Fuel Pumps TWO

    A pair of two Walbro GSS342 255lph fuel pumps. They have 1000 miles or so on them. Installed in my 03 Cobra as part of a Lethal Performance return style fuel system. Just installed a different blower and need even more fuel! So these are priced to sell quickly. Included are just the two...
  6. da28fan

    Need Metco Lower Pulley Diagram or Instructions

    Just bought a used Metco 4 pound lower pulley setup for my 2003 SVT Cobra. Took it apart and am powder coating it. But I was hoping someone would have a PDF (or a link or file) of the Metco installation instructions, or just a pictoral diagram of the spacers and bolts, etc. Email address is...
  7. da28fan

    Kenne Bell 3.75" 8-Rib Pulley Used with 8mm Bolt

    This is a used Kenne Bell 3.75" 8-Rib pulley. It uses an 8mm bolt, not a 10mm bolt, so I believe it is for the older KB blowers. Has a slight cosmetic imperfection on the front edge, as in picture, but worked fine for me. Also included is a brand new 8mm bolt I bought direct from Kenne Bell...
  8. da28fan

    E85, Innovate LC1 Wideband, and AFR

    Hi there. Just installed an Innovate Motorsports LC1 Wideband into my 2003 Cobra (mods in signature). I've heard that the ratio should be lower on a car running E85 than regular fuel, possibly as low as 9.5. So a couple of questions. First, will the Innovate LC1 wideband setup work...
  9. da28fan

    PORTED Eaton Blower for Cobra

    This is a freshly ported and matched blower, throttle body, and plenum from a 2003 SVT Cobra. It has never been used since it was ported. It also comes with a Motoblue Quick-Change pulley hub and a 2.73" pulley ring attached. No puller is needed to change pulley size again. Just use a...
  10. da28fan

    Kenne Bell 3.75" 8-Rib Pulley Used w/Bolt

    This is a used Kenne Bell 3.75" steel 8-rib pulley. Came with my 2.2 that I bought, but ended up using a different size. Has a slight imperfection, as seen in the picture, probably from being dropped at some point, but pulley works fine and is polished and shiny! Also including a brand new...
  11. da28fan

    Kenne Bell 3" 8-Rib Pulley Brand New

    This is a brand new, never-used, or never even mounted 3" Kenne Bell 8-rib pulley. I bought it for my 2.2 Polished blower, but ended up sticking with my 2.75. Cost $79 directly from Kenne Bell. Will deliver to any continental US address for $70, and also tossing in a new Hex Head bolt that KB...
  12. da28fan

    WTB: Polished Radiator Cover for 2003 Cobra

    Looking for a polished, aluminum radiator cover for my 2003 Cobra SVT. I've seen pics of the Steeda one and the UPR, but just want a nice polished radiator cover that is reasonably priced. If you one that is either new or in great shape, please LMK.
  13. da28fan

    Eaton Supercharger/Blower, Plenum, & Throttle Body FS

    :banana: This is my stock Eaton supercharger / blower, plenum, and throttle body from my 2003 Cobra Vert. I just upgraded to a Kenne Bell. Nothing wrong with anything you see; what’s in the pictures is what you will receive. Blower also comes with a Moto Blue Quick-Change pulley setup...
  14. da28fan

    SVT Cobra LFP Pulley Puller Used Once!

    LFP Pulley Puller for the 2003/04 SVT Cobra series. Used once to remove the stock pulley from my Eaton and it's been sitting since. I've seen more pullers listed, but make sure you get the whole kit, as many of them are missing the metal bar that goes into the side for leverage when loosening...
  15. da28fan

    SVT Cobra Fuel Rails & Connector

    Here is a used set of fuel rails and connector from my 03 cobra. Upgraded to a return-style fuel system, so parting with the pieces I'm no longer using. $90 shipped in continental US.
  16. da28fan

    FS: OEM Cobra Fuel System-hat, pumps, rails, injectors, connectors

    I just upgraded to a return-style fuel system on my 03 Cobra. So I'm parting with the stock dual-pump fuel hat, dual fuel pumps, original fuel rails, connectors, and stock 39 lb (42?) fuel injectors. Research says they are 39, but apparently bench at 42? Stock regardless. What you see in the...
  17. da28fan

    FS: KB 40A BAP Boost Pump Kenne Bell

    Selling a used Kenne Bell Boost-A-Pump. Came with the KB 2.2 I bought, but went with Walbro pumps, so do not need it. Stamped 30 17 on bottom, so research says it is a 40A. Tossing in some extra wire that I cut off the Boost-A-Spark I installed, just in case you need more. I'm kind of new...
  18. da28fan

    Diablosport Predator Flash Tuner for 03/04 Cobra

    This is a used Diablosport Predator tuner for the 2003 and 2004 SVT Cobra series. Worked great for my 2003 SVT Vert. My local tuner only uses SCT, so I had to switch. My stock tune was put back in the car, so this tuner can be used on any Cobra. Comes with original box, user manual, and also...
  19. da28fan

    11" wide Cobra chrome wheel & 335s?

    Doing some mods to get HP up to 600 or so. I want 335s in the back, but does anyone make an 11" wide rear chrome 5-spoke Cobra wheel? I can get 10.5" 5-spoke cobra rear wheels to match the 9" OEM chromes on the front, but heck, can not find an 11" wide chrome wheel for the back to match, in...
  20. da28fan

    Mount Aeromotive Fuel Regulator in 03 Cobra?

    Putting in Lethal's 850rwhp return-style fuel system in my 2003 vert SVT. Lines are run into the engine bay, but scratching my head on where the heck to mount this fuel regulator? I hate to just leave it loose and zip tie it to something, and hate to bury it somewhere because the tuner will...
  21. da28fan

    Adding KB 2.2 - Advice appreciated!

    I'm new here, a 48-year old guy who acts like he's 18 again when I get behind the wheel of my 03 Cobra. It's a screaming yellow ragtop with a lighted rollbar, Bassani X and cat-back, 2.73 pulley, 100mm idlers, Accufab throttle body/plenum, inlet pipe, MAF, K&N, H&R lowering springs, Diablosport...

Top