Just as the title says I am looking to buy a termi(maybe) in southern california. I am looking for under or around 60k miles, stock or lightly modded. Not abused, I understand if its been driven hard but im not looking for someone's track mule. Needs full interior, radio, heat, ac etc. Looking...
Copy Paste from my craigslist ad, car is located in Riverside Ca
I have my 2007 mazda Mazdaspeed3 for sale or trade today
TEXT: 561-358-2371
First: I am looking for a rear wheel drive car, please dont offer anything fwd as I have no interest in it, sorry nothing personal I just miss rwd...
Asking $125 for the tuner(150 to unlock from sct, theyre 379 new, you get it for 275)
$25 for the pony
$30 for the detector
I'm open to offers on everything, just let me know
thanks
I have a 2001 SVT Cobra for sale. It has the following tasteful modifications: Maximum Motorsports Caster/Camber plates, Maximum Motorsports coilovers(front), bilstein struts(rear), H&R springs(rear), Maximum Motorsports welded subframe, autopower 4 point roll bar, FRPP (ford racing performance...
I have 2000 dollars to spend, and I'm looking at either an eaton swap or a centri(the 1500 vortech guide over on corral or modded mustangs or whatever)
My goal is 450 rear wheel, on an aluminator motor
Which one of these two options is feasible, including tune and minor fuel system upgrades...
Like the title says I need an 01 or 03/04 rear bumper and a passenger tail light for an 01 cobra(amber turn signals)
let me know if youve got either or both of these things, cash in hand
Hey everyone, I'm looking at a set of recaro seats, getting them used off of a friend for not too much. Theyre SPGs...I was wondering where I can find the rails for them, as I can find rails for sparcos and corbeaus but cant seem to find them for recaros. If anyone can point me in the right...
I have a pair of stock 01 front seats for sale. Charcoal grey with the suede inserts. Theyve been in the car for 50XXX miles and as such have some wear, the drivers side leather is a bit cracked, and the passenger side is to a lesser extent. Because these seats arent in perfect condition I'm...
Hey everyone, got two questions.
First: I'm installing my autometer oil pressure gauge, and need to know how I can power it, I heard something about fuses 35 and 37, and bought an add a fuse, but the issue is it will not slide all the way in and will fall out if I drive, its the right size but...
I am looking at installing a set of Sparco Evo IIs into the car, and need to know how I can mount them. I want the ability to slide the seats, but other than that I'm open to suggestions on how to mount them. I am not a welder and have absolutely zero fabricating experience, so I do not want to...
I have a lot of non-car related things for sale
heres an album Things I have for sale pictures by OwensEclipse - Photobucket
All prices are negotiable
Tamiya TT-01 RC Car with drift tires and locked diffs(did it with paper so they can be converted back to unlocked) controller needs new...
So I stripped my radio/audio stuff out of my 01 vert since I want to go a different route.
As a result I have a large pile of radio-related crap
here are pictures
Before we get into the description I'll be completely honest, all of this was pulled out of the car this weekend, and is...
Since I have an unhealthy obsession with my oil I got one of these gauges, and need to install it now, I read this http://www.svtperformance.com/forums/how-230/212228-oil-pressure-electric-eng-temp-electric-gauge-install.html but did not follow it too well, I know that I need to take the stock...
Hey guys, was wondering how I can figure out what gears are in my rear end without dropping my diff, first and second feel really short and my highway cruising speed(70mph) is just south of 3k rpm in 5th so I'm leaning towards 4.10s, but is there any simple way to figure out what I have so I can...
Price drop, $19,000 FIRM
I have a 2001 svt cobra for sale with a brand new FORD RACING ALUMINATOR 4.6L DOHC LONG BLOCK NORMALLY ASPIRATED Aluminator motor, capable of 700rwhp when supercharged or turbocharged. This is an very stout motor, on an excellent 48000 mile chassis. The motor has...
Hey guys, so I got my tune from Amazon today(very nice job btw, highly reccomended) and was wondering, can I change my rear end gears and set up a 2step without having to call and get them to write me a new tune? I'm the second owner of my car and so still need to figure out what gears are in...
So I just ordered a SCT SF3/X3 from AmericanMuscle, and after submitting my info to Bama performance they told me they cant tune my motor because its an 01 bottom end and 03/04 heads, as a result I am going to need a custom tune...I assume, am I correct in this assumption or are the canned tunes...
Hey everyone, Found an opportunity to get one of these kits Paxton NOVI-1000 Mustang Supercharger Kits - SummitRacing.com used for about 1250, Would this be a good decision? I have an aluminator longblock and would like to make between 450 and 500 rwhp. How capable is this blower of meeting my...
Hey everyone, recently finished my aluminator longblock swap, and was wondering if I were to do an eaton swap, would I still require all the parts like timing cover pullies etc...or do I just need blower, piping, heat exchanger, intercooler reservoir
Thanks
So the dealership doing my Aluminator swap finished the swap today, but are telling me that my motor is throwing an EGR code. Since I'm the second owner I have no idea if the car was reflashed or not, but I assume it was if theyre throwing this code.
So my question is how can I get rid of the...
Recently after looking around at 03/04 cobras, lightnings, and other factory boosted cars I realized how much easier it is to make power on them than my 01 cobra, and as a result have been looking at those. Unfortunately I cannot afford one of them without getting rid of my 01, so here's the...
hey everyone
so I read all the basic FAQ, all the what to buy what not to buy etc.
Obviously I want an intake, midpipe, and exhaust(car already has JBA headers on it) but the FAQ did not state which brands(if any) would give the biggest power gains or if theyre all the same. I know with my old...
Hey guys, so recently the motor in my cobra blew, to make a long story short insurance covered it and bought be a brand new N/A aluminator motor :pepper:
Now before I get the car back with the new engine I've got a couple of questions about this, and after a bit of searching I can't find my...
Hey everyone, not so happy to be posting this but oh well
Yesterday I spun a bearing on my new(ish) 01 cobra. I changed the oil today and 3qts came out of the 6qt pan. I then cut open my old oil filter and found metal flakes in it. All signs point to a spun bearing
Anyway I drove the car at...
So I've done a bit of reading about turbos vs superchargers and the potential power gains available from both etc... And in my research I found the on3 kit. Now theyre selling that for $1899, for what I assume is a "tuner kit"(no electronics/injectors, etc). Now I know for me to build the same...