Search results

  1. S

    FS: 2007 Custom Suzuki Hayabusa w/ only 3800 miles!!!

    Always garage kept on the stand and under a cover. Never seen rain. Only 3800 miles!!!! 2007 SUZUKI HAYBUSA 1300 CC CUSTOM STRETCH BY TRAC DYNAMICS AND 300 REAR TIRE PERFORMANCE MACHINE DOMINOES RIMS W/ TRIPLE Z CHAIN CUSTOM LICENSE PLATE BRACKET BIKE IS LOWERED 4 INCHES CUSTOM KICK...
  2. S

    FS: 2001 Bullitt (Cobra Clone) w/ built 4-valve, KB 2.2, IRS and much, much more!

    CLEAN TITLE, 2nd Owner! VIN 1FAFP42X71F239881 Bullitt #3350 I bought this car half-way through a 03 Cobra conversion. The motor has slightly less than 18K miles on it. The car itself has 76K. Here is a list of the current modifications: Engine: Built motor by Houston Performance -2003...
  3. S

    FS: Brand New Fore Performance Fuel Filter

    Selling a brand new Fore Performance fuel filter. This filter was never used and never even had fuel lines attached to it. The fitting ends are for -10 fuel line. Switched directions on my fuel set up and do not need. $75 plus shipping.
  4. S

    FS: Brand New Fore Performance Fuel Filter

    Selling a brand new Fore Performance fuel filter. This filter was never used and never even had fuel lines attached to it. The fitting ends are for -10 fuel line. Switched directions on my fuel set up and do not need. $75 plus shipping.
  5. S

    Weld Racing Chrome Cheyene 6's for F-150's and Expedition's

    Weld Racing Forged Alloy Chrome Cheyenne 6's. 17 x 10 - Bolt 6 X 135 - Offset -25MM - Backspace 4.5" Ready to mount on your F-150/Expedition or anything Ford running a 6X135mm lug pattern. One wheel has slight curb rash. $550.00 plus shipping takes them! Here is a link to new...
  6. S

    FS: 3" Bassani Polished Stainless Steel Flowtubes

    Selling a set of brand new (never used) highly polished stainless steel 3" flowtubes that reduce down to 2.5" on the inlet side to bolt up 3" mufflers to a 2.5" midpipe. I am selling these because I need a full 3" flowtube to bolt up to my 3" midpipe. $65 plus shipping
  7. S

    FS: Mac 3" IRS Catback w/Ceramic Coated Polished Tailpipes

    Selling my 3" Mac c/b. It has been on the car for about 2,900 miles. I am switching to the Bassani 3" and no longer need this. I don't want to give up the Mac sound but want stainless. I had the tailpipes coated using Chromex Ceramic Coating because I didn't like the plain aluminized...
  8. S

    Flowmaster now makes SS kits for the 99-04's!

    Stumbled accross this on their site looking for info on the 3" kit (which btw they must've discontinued because it's not on their site anymore)! I thought maybe the die hard Flowmaster guys would want to know that they can now have the polished Flowmaster setup without having to piece meal...
  9. S

    FS: BilletFlow IRS Bace (Brand New) Red

    Never installed, comes with instructions and all hardware (still in original packaging). Red in color. $150 shipped. Same as this one from Lethal: BilletFlow 99-04 Cobra IRS Brace [IRS-BRACE] : Lethal Performance, Performance parts for Ford Mustangs
  10. S

    FS: BilletFlow IRS Brace (Brand new) Red

    Never installed, comes with instructions and all hardware (still in original packaging). Red in color. $150 shipped. Same as this one from Lethal: BilletFlow 99-04 Cobra IRS Brace [IRS-BRACE] : Lethal Performance, Performance parts for Ford Mustangs
  11. S

    Finished my Mac longtube w/ 3" exhaust install!

    Well, I finally decided to do the longtube install after weeks of putting it off due to lack of interest. The project was no joke to say the least. After much debate and trying different exhausts I finally decided on the following setup: - Mac Longtubes (only because I got a really good...
  12. S

    FS: Flowmaster IRS Catback and MRT o/r Stainless H-pipe combo!

    Both in excellent condition! $475 plus shipping! H-pipe alone cost $415 plus shipping! Has extra bung welded in for wideband O2. Excellent combo! Sounded amazing!
  13. S

    Anyone running a Dr. Gas x-pipe?

    Any experiences with these pipes out there?
  14. S

    Anyone have experience with LubeLocker on their differentials?

    Gonna change my diff fluid and finally strap on the BF diff brace and was wondering if anyone had experience with the Lube Locker differential gasket. Thanks for any info! LubeLocker - Products
  15. S

    Could bad intercooler hose to manifold o-rings cause overpressure and leaks?

    Everytime I get the car under boost (usually above 14-16 psi) the intercooler tank springs a leak and creates a mess in the engine bay, it is first noticed as it blows through the passenger side hood vent onto the windshield. I looked at the stock plastic intercooler tank and it appears to be...
  16. S

    Anybody running the Moss Mustang LED sequential kit?

    Been contemplating both the sequentials and the LED options but couldn't decide. I knew I would want the best of both worlds but saw how some guys were really having a hard time making both happen. Then I came across this kit. Moss' site has neither pics nor videos of the kit but sounds...
  17. S

    Looking for color suggestions on my intercooler/overflow tanks...

    Debating between maybe a True Forged intercooler reservioir in wrinkle black to match the blower case or a Lethal Performance silver powdercoat to match the COP covers. What do you guys think? I am also going to be purchasing the JLT carbon fiber RAI in the very near future if that in any way...
  18. S

    FS: 99-04 MRT SS Catless H-pipe

    Converting to a 3" system w/long tubes. No more use for a great sounding and quality h-pipe. Probably the best fitting and sounding h-pipe on the market. It has an extra bung welded in for a wideband sensor. Stainless steel. Here's the link to MRT's site. Mustang H-Pipe, MRT...
  19. S

    Anyone have pics of a 3" Mac catback on the car?

    Preferably some rear and underneath shots. Just curious about fitment. Thanks.
  20. S

    Anyone splice in Super 44's to their Flowmaster catback?

    I have a set of Super 44's offset/offset same side and was wondering if anybody swapped out the huge 40 series cans from the Flowmaster 2.5" kit for a set of these. Curious about the sound difffernce but also looking forward to the ground clearance relief.
  21. S

    FS: 2001 Bullitt w/ built 4-valve, KB 2.2, IRS and much more!

    CLEAN TITLE, 2nd Owner! VIN 1FAFP42X71F239881 Bullitt #3350 I bought this car half-way through a 03 Cobra conversion. The motor has slightly less than 10K miles on it. The car itself has 69K. Here is a list of the current modifications: Engine built by Houston Performance 2003 cobra...
  22. S

    FS: 2.5" Flowmaster Super 44 Mufflers (Pair)

    I have a pair of barely used (maybe 400-500 miles) Flowmaster Super 44's for sale. These mufflers are 2.5" offset same-side as in the original Flowmaster IRS catback. I was trying different mufflers in my Bassani IRS catback and wasn't wild about the chambered sound. These mufflers were...
  23. S

    FS: Bassani 2.5 SS Catback w/ 4" Tips (Brand New Mufflers)

    Local sale only for now. Too much of a PITA to box and ship. This is a polished kit with brand new, still in the box mufflers. The old mufflers were sold and replaced with new. Not the ones pictured. $450...local sale only or trade someone with a Borla Stinger catback.
  24. S

    Intercooler pump stays running even with ignition off...what gives???

    Can't figure it out. It was jumped to stay running anytime the ignition was ON, now it won't turn off even when the ignition switch is turned OFF. What is that all about? :shrug: Footnote to the story: This just happened to start right after I hosed down the engine bay following a cleaning.
  25. S

    FS: Miscellaneous 99-04 Parts

    Cleaning out the garage. Prices do not include shipping. - 99-04 Door Mirrors -Pair -(perfect condition) - $50 - Autometer 3-Gauge Pillar Pod (black) - $15 - 5-speed Shifter Bezel w/ boot and lower insulator (traction cont button located on bezel) - $40 - Rear Seat Delete Kit (Never...

Top