Search results

Mine doesn't - for two reasons. One - I finally sold it last June after 19 years - nearly cried. Two - It isn't on Google Maps, but it is on Apple Maps, funnily enough. If you search for 10 Ashbrook Close, Rowville Victoria Australia and go to street view, it's sitting in the driveway on one...

Hi guys I have an Australian delivered 2002 Cobra (same spec as a 2001) and I have done the whole Terminator swap/plastics/interior/whipple etc. After 20-odd years of hard work, the IRS is loose and the LHS rear wheel bearing is toast. I need to get a new hub and bearing, but I also need upper...

So, a few years ago on this forum I bought a nice, rebuilt 2.3 Whipple. It has a carbon fibre snout but otherwise all stock. Car has done little work since putting it on - maybe 5-6000 miles tops. Car still runs fine, no noises, the Whipple uses a tiny smidge of oil from time to time, but then...

hiya - I have a 90r with the exact same issue. Did you find a fix for it? Thanks. Reference Thread https://www.svtperformance.com/threads/e-ton-viper-90r-quad-problem-anyone-fool-with-these.1055436/

Hi guys, nice set of Amber tails - no damage, no scratches, nice harnesses - the only other noteworthy thing is that they're tinted. Appears to be spray-on tint so could probably be removed with some thinners - if there's no interest in them how they are, I'll try it myself. I will include a...

Hi guys I’m searching for an answer about the clutch setting on my Aussie Cobra. It’s had a complete terminator swap for about 8 years and is running a 2.3 Whipple and all healthy and happy. clutch I put it in was a Centreforce dual friction about 10-15k miles ago when the drivetrain swap-over...

2003/4 Cobra intercooler $300 - check the postage detail & prices at bottom I live in Australia, so shipping is not going to be FAST or cheap - I've had stuff take 2 weeks, but it's more likely 6 weeks as there are fewer international flights due to Covid-19. Shipping costs are flat-rate to...

And it’s not due to excessive throttle. Took the car out for a drive today and for some reason, the traction control is kicking when driving, predominantly when turning gentle left corners at 40-50 mph. Not trying to spin the tires and I’m sure it’s not spinning them and Confused since nothing...

Ideally someone who bought a TMI set because their driver's seat was toast and kept the original passenger seat... Anyone have and feedback on how close a match the TMI seat covers are? Leather or Vinyl? Suede or Alacantra? answers on a postcard to......

Need shipping to California 90723

Hi guys Looking to buy a few IRS parts, 2001 Cobra stuff is rare, but I'm assuming that the 2003/4 IRS is the same other than the gear set and the half-shafts. Is the half-shaft spline count the same across the 2001/2003? Thanks in advance

Will need shipping to Buena Park, CA 90620 Just need the outer skin but would consider a quarter cut. Thanks in advance

Hi guys In search of the following parts if you have them available: Drivers side Upper and Lower control arms rear suspension Drivers side rear hub & wheel bearing Drivers side rear suspension strut Driver's side quarter panel (used or NOS would be fine) Not mandatory but would be ideal: Rear...

So, after lots of trouble over the past couple of years with tuning the car for a 2.3 Whipple and a KB BaP, it's all been pretty good and stable for the past year. There is a characteristic of starting that is piquing my curiosity though - when the car is cold, or it hasn't been started for a...

Hi guys, struck another interesting issue with the Cobra. The is the 2002 cobra with the '03 drivetrain, just been chasing a rattle in the motor on start up. Turned out to be the oil seals on the back of the cam chain tensioners. Replaced lifters, chains, guides, tensioners, oil pump, oil pump...

Hi guys I bought a Gen1 2.3 Whipple from the forum about a year ago, it was rebuilt before I bought it and had about 2500 miles on it - I have no reason to doubt the seller and he provided a receipt. I got the blower installed in January and I've had no end of trouble getting the tune right...

I just ordered one, I haven't removed the old one yet, but a little surprised to see that - in addition to some double-sided tape - the new one has two posts on the back of it, I'm assuming for location purposes? I would have thought that they were just stick-on items, but apparently not? Just...

Hi guys - odd little problem, my trunk light is staying on all the time, flattens the battery and is affecting my alarm. I've had the alarm since the car was new and I'm sure it's fine, but have recently replaced the trunk and the harness it comes with - I'm thinking the switch is no good, but...

The reason I ask is this: About every 5th time I start the car, it sounds like I have a couple of failed lifters (or ones that have leaked down) and they tap away like a bugger for 30 seconds, then the oil pressure seems to close them up and the motor is quiet as a grave, sounds really good. It...

Hi guys Going to get a set of Brembo's that came from a 2000 Cobra R fitted to my '02 Cobra - I have the repro Cobra R wheels so clearance with my normal wheel should be fine, but suddenly wondered what spare tire would be required? Will the original space save work, or is there some other wheel...

Hi guys Going to get a set of Brembo's that came from a 2000 Cobra R fitted to my '02 Cobra - I have the repro Cobra R wheels so clearance with my normal wheel should be fine, but suddenly wondered what spare tire would be required? Will the original space save work, or is there some other wheel...

So - my tuner is struggling with my car, and this is what he's finding (bearing in mind he's never seen a Cobra Mustang - 2.3L Whipple, 60lb injectors etc - never tuned one before - because this is Australia and the Terminator was never released here) - but he's an experienced tuner. When the...

So - my tuner is struggling with my tune, and this is what he's finding (bearing in mind he's never seen a Cobra Mustang - 2.3L Whipple, 60lb injectors etc - never tuned one before - because this is Australia and the Terminator was never released here) - but he's an experienced tuner. When the...