I've gotten quite a few offers. I'm prioritizing by those who want multiple items and then time received. If I haven't replied to you yet, you are further down the list. Thanks for your patience.
I don't have a PM from you... is your post count high enough?
Guys, the PRP software I have is not tied to a specific handheld device. In fact, I was using an X3 first then later upgraded to an X4.
I can't speak to other vendors but Lasota did not ask for a handheld serial # when I purchased the PRP software through him.
I still have these items laying around from my old cobra. Prices include PayPal fees and shipping cost with USPS. I'm open to offers but keep them reasonable. PM is the best way to reach me.
[Used] AeroForce Interceptor dual scan gauge - SOLD
[Used] AeroForce 3.5 Bar Boost Sensor - SOLD
[Used]...
Prices include PayPal fees and shipping cost with USPS. I take good care of my stuff so prices are pretty firm. PM is the best way to reach me.
[Used] E85 compatible Custom Return Fuel System - SOLD
This started out as Lethal's budget return kit. I upgraded the pumps to 2 Walbro 455s, added...
SOLD!!!
Thanks SVTP!
The time has come for my cobra to move on to a new home. I've driven it less than 2 thousand miles in the last 3 years and with a baby on the way, I know I'm going to have even less time for it in the future. With that said, I'm not in a hurry to sell. I will be...
Can someone that hasn't removed their stock EGR pipe tell me if yours is touching anything back there that you can see?
I re-installed mine after removing the LTs and it's touching the main wiring harness. It has the thermal sleeve thing on it but I'm not sure if that is enough to protect the...
Prices include PayPal fees and shipping cost with USPS. I take good care of my stuff so prices are pretty firm. PM is the best way to reach me.
[Used] Kooks 1 3/4" stainless longtube headers with 3" collector (no EGR) - SOLD
Bought new from Lethal in 2012. Has an additional O2 sensor bung...
2.3L Whipple Gen 1 Black (single blade) - SOLD
I bought this used in 2013 from another member here. I sent it to Jon Bond Performance and spent almost $1,000 to have all bearings and seals replaced, the bypass valve replaced, and a carbon fiber coupler upgrade (for high RPM). Here is an invoice...
SCT X4 and RR 2.75" Whipple pulley
Prices include PayPal fees and shipping cost with USPS. I take good care of my stuff so prices are pretty firm. PM is the best way to reach me.
Metco pulley brace - SOLD
Like new. Installed for < 100 miles. Cured my belt slip in the end.
JLT High Boost...
I cut mine in half when I removed it. Stupid. Now that I want to put it back on I can't.
Please help me out if you have one you are willing to part with.
NEW - carbon fiber instrument cluster overlay from Carbon Driven - SOLD
This is brand new, never installed. I just decided I didn't want to mess with separating the clear plastic from the cluster to install it. It costs $40 on his site - save $10 on me!
I take PayPal only. PM with...
...what comes out when you empty yours?
I emptied mine today after probably 6 months since the last time but very little driving (probably less than 500 miles). As you can see, very little oil but lots of water, which I assume is from condensation.
I want to think this is...
Gates K080765HD - SOLD
Goodyear Gatorback 4080775 - $10 shipped
I tried this belt with a 3.0" upper, stock lower, and full idler setup and had belt slip! It may have been a little too big but I want to disclose everything to a potential buyer. That's why I'm selling it so cheap. I bought it...
I have HIDs but in the OEM housings. Primarily because all the housing options I've seen out there are really rice/ghetto looking.
Until now... I came across this company today: SW Lights
They take the OEM housing and retrofit them with a projector setup. You can use their HID ballast/bulb...
As the title indicates, I'm seeing what is to me a weird result when logging load at WOT. It jumps up to a good number when I hit the throttle but instead of continuing to climb, it decreases throughout the pull.
The load seems a little low to me as well. My displacement is set at the stock...
Hi,
I'm trying to get my 03 cobra (AMZ2) to pass TX inspection. I'm allowed only 1 monitor in a "Not Ready" state. I currently have 2 - EGR and Catalyst.
EGR equipment has been removed from my car and EGR codes have been suppressed, but I do not currently have EGR disabled via system switch...
I posted this in the Terminator section but in case it's E85 specific I'm posting here too.
Background: I recently upgraded my lethal budget return system to dual 465s and an -8an feed. Still utilizing stock rails and their frps adapter for the regulator. These upgrades were for E85.
Issue...
Background: I recently upgraded my lethal budget return system to dual 465s and an -8an feed. Still utilizing stock rails and their frps adapter for the regulator. These upgrades were for E85.
Issue: I'm currently working on perfecting my idle (tuning myself) and during each session I typically...
Used - SCT X3 Handheld tuner - SOLD
SCT says the SF3 (PN: 3015) does both custom and pre-loaded tunes and the X3 (PN: 3000) only does custom tunes. My device says X3 and PN:3000 on the front but in the menu it has an option for both pre-loaded and custom tunes. I never tried to use the...
Used - SCT X3 Handheld tuner - SOLD
SCT says the SF3 (PN: 3015) does both custom and pre-loaded tunes and the X3 (PN: 3000) only does custom tunes. My device says X3 and PN:3000 on the front but in the menu it has an option for both pre-loaded and custom tunes. I never tried to use the...
Used - SCT BA2600 MAF housing and sensor - SOLD
I do my own tuning so I can personally attest to this sensor being in good working order. I just decided to switch to a slot style MAF so I don't need this one anymore.
Shipping cost covers shipping to the CONUS only. Other destinations may...
I keyed the ignition on today for the first time since upgrading my fuel system for E85. I was checking my fuel pressure at the regulator when I noticed a burning smell. I knew it had to be electrical since the motor wasn't running. Soon enough I saw white smoke coming out from under the...