Search results

I have 03 cobra heads slightly used they are complete (cams, valve springs, followers, lash adjusters). i also have a brand new 01 cobra intake with all the injectors also new pcv, egr, throttle body, and iac. Heads $650 obo Intake $575 obo

i have a set of complete 03 cobra heads and a brand new 01 cobra intake with everything including throttle body, all vaccum lines, pcv, egr, iac. will take 800 obo for the heads and 700 obo for the intake.

I have been collecting parts for c-swap. In the spring when i have the rest of the parts I was going to take the stock engine out for the build and put a built 5.0 stroker motor with around 10.5-11.1 compression, will be using my 97 cams with 03 heads and a wet shot. I already have bbk longtubes...

Yesterday i picked up some bbk longtubes used for 125 dollars im getting the ford racing manifold gaskets and the bbk shorty x pipe. i was told not to put them on without a tune it will be very dangerous. my car is stock minus imrc deletes. I would like to install them to make sure there are no...

do the 01 cobra headers flow better than our headers? iam still gathering parts for the c-swap, is it worth it to get a set of used 01 cobra headers as they are very cheap. Im not sure what route im going with boost yet (turbo or supercharger). help meeting the guy soon for a stock intake tube.

It might be a stupid question but if im wrong just let me know im about to order struts and shocks and lowering springs. in the rear It appears our cobras have four shocks. does the new shock and strut kit come with four shocks or two shocks. :shrug:

trying to decide what maf and injectors to get doing a c-swap then later built bottom end and boost around 500rwhp. confused on what and where to buy. dont know if i need calibrated injectors or what....

Im doing a c-swap on my cobra and in the future adding boost or nitrous with a built bottom end.(450-500) trying to figure out what maf to get with what injectors I know they need to be calibrated where can I find my setup and what maf should i get.

99 lincoln 4v c heads they appear to be b-heads they could be the wrong pic. im not sure if they are the same as the 99 cobra any info greatly appreciated

I want to do the c-head swap but what longtubes do i order the 96-98 or 99-04 and if i do the cam covers from the c-heads will my plugs and wires fit or does it requie the cop's

I was looking underneath the car from a lift and saw a decent amount of oil on the passenger side of the block. close to where the head meets the block and 2-4 inches behind the timing cover. i recently did a valve cover gasket on that side and its a little damp with oil under the edge of the...

im not sure what to do i have exhaust on my 97 cobra but want to do more boltons possibly cams not sure what tuner i should go with 4 bank chip or handheld. any info would help