Search results

  1. dart454twinturb

    Built mod motor build part out. Turbo, Fast, CG Fab, MMR, COMP, Bullet

    03/04 cobra iron block 03/04 cobra forged crank Manley Billet I Beam Rods Forged Diamond Pistons 10.5:1 comp Total Seal AP Stainless Rings ARP Main studs ARP rod bolts ARP side block bolts Cometic MLS head gaskets MMR 7 qt oil pan MMR windage tray with gasket MMR pickup...
  2. dart454twinturb

    Th400 setup

    I have a th400 setup for sale. Was built and had 2 passes on it. Here is what all I have Neil chance built 1500 hp th400 with deep sump aluminum pan that has been tapped for trans temp sensor, and trans brake Lokar dipstick Modified t56 crossmember and rubber mount for the th400 Sfi...
  3. dart454twinturb

    Mach 1 shaker setup and engine

    I have the complete Mach 1 shaker setup for sale. Will include all brackets, bolts, drain hoses, cold air scoop, and hood. Also have a brand new hood decal to go with it. All parts are in excellent shape! I also have the engine and trans for sale as well. Message here or text me 785-608-9228
  4. dart454twinturb

    WTB dark shadow grey spoiler and decklid

    I am looking to buy a DSG 03-04 cobra decklid setup with spoiler and brake light. Doesn't matter if light is broken or not. PM or reply here. Paypal ready now. I can pick up within a reasonable distance or will need it shipped to 66605 Topeka ks. Thanks
  5. dart454twinturb

    WTB dark shadow grey 03-04 decklid and spoiler

    I am looking to buy a DSG 03-04 cobra decklid setup with spoiler and brake light. Doesn't matter if light is broken or not. PM or reply here. Paypal ready now. I can pick up within a reasonable distance or will need it shipped to 66605 Topeka ks. Thanks
  6. dart454twinturb

    cobra pcm and t56 trans harness

    I have for sale a pcm out of a 2003 cobra. It is in good working order. Took it out to run a fast system. I also have a T56 wiring harness for the same vehicle. asking 225 shipped for the pcm and 115 shipped for the trans harness. YOu can message me here or text me at 785-608-9228.
  7. dart454twinturb

    Lift off cowl hood and drag wing

    Up for sale is a Joe van overbeek lift off cowl hood. I have Zeus rails to go with it. Have over 900 in receipts. Sell for 650 picked up in Topeka ks. Also have a 17" racecraft drag wing. It was mounted but I'm going a different route. 475 picked up in Topeka ks. You can message me here or text...
  8. dart454twinturb

    Cobra wiring harnesses

    I have a couple harnesses for sale. One is the oem dash harness in great shape and one is the engine harness. Both in great shape. Can text pics. You can send me a pm but texting would be the fastest way to get ahold of me. 785-608-9228
  9. dart454twinturb

    Built sra ready to go. Moser, upr, ebc, motive

    Up for sale is a completely fresh built rear end. It started as a stock 99 gt housing. Had the quad shock mounts cut off and the tubes welded to the diff, has 35 spline moser axles, full spool, 3.90 gears, moser differential cover with cap studs, c clip eliminators, brand new cross drilled cobra...
  10. dart454twinturb

    Performance, chassis, and go fast parts, cage, flaming river, maximum motorsports,

    Brand new QA1 175lb coilovers 94-04 still in the boxes 600.00 shipped Maximum motorsports caster camber plates 125.00 shipped Kenny brown extreme matrix subframe x brace system 400.00 picked up 425 shipped. Maximum motorsports 6pt bolt in cage with swing out door bars 600.00 picked up...
  11. dart454twinturb

    Torque boxes, best, worst, upgrades. What do you have/reccomend??

    Shooting for around 1100 hp at the rear wheels. What have you guys done to reinforce this area. I was looking at a kit from wild rides race parts. They completely replace the factory ones with thicker sheet metal ones. Here is a pic. What else would you guys recommend??
  12. dart454twinturb

    What head gaskets??

    Building my motor now. What head gaskets do you guys reccomend? Going twin turbo with around 18-24lbs and gonna be shooting for 1000 hp. What head gaskets should I use. Thanks in advance.
  13. dart454twinturb

    terminator parts Hawk pads, braided lines, injectors, maf, hydroboos, oil pan,cluster

    Up for sale I have several parts for sale. I will put prices on all that will include shipping. I would prefer not to ship the bigger items so local pickup in Topeka ks would be preferred. I will ship at buyers expense on those items though. I can provide pics of anything through text so feel...
  14. dart454twinturb

    WTB built cobra heads

    I am looking for a built set of cobra heads. Ported and polished, upgraded valves, springs, retainers, hardened seats, and possibly turbo cams. Let me know what you got. PM or text 785-608-9228
  15. dart454twinturb

    aftermarket steering wheels and quick release hubs

    Who has an aftermarket steering wheel in their car with a quick release hub? How did you do it. Any bolt in kits out there available? Lets see some pics of your setup and what parts did you use to do it?
  16. dart454twinturb

    Terminator parts for sale

    I have a few parts from my terminator for sale. 03/04 Engine harness 185 shipped 03/04 ecm 275 shipped 03/04 cruise control module 65 shipped 03/04 front impact bar 75 shipped 03/04 cobra ps rack in good shape 32k miles 225 shipped 03/04 ps pump and reservoir 100 shipped...
  17. dart454twinturb

    1999 cobra irs assembly and front brake setup

    I have for sale a full 1999 cobra irs setup for sale. It will include all components for install including all brakes, cables, brackets, and bolts. Asking 750.00 for it. Also have a complete cobra brake setup for the front will include spindles, hubs, rotors, pads, calipers, brackets, and...
  18. dart454twinturb

    termintor brakes/steering components

    I have for sale several parts from a 2004 terminator. All are steering/brake components. Here is a list of what I have 03/04 power steering rack 200 03/04 hydro boost setup with lines 175 03/04 ps cooler 50 03/04 ps pump 65 03/04 ps reservoir tank 40 all prices are plus pp and...
  19. dart454twinturb

    2003/2004 terminator engine harness

    I have a complete 2003/2004 cobra engine harness in good shape with all plugs in good shape as well. No damage and ready to go. 185 shipped.
  20. dart454twinturb

    Weapon X coil covers

    I have for sale a set of weapon x coil covers. They are in great shape and have not been used in a running car. They have been used for mach up only. They do require you to use weapon x coils as well. These are no longer available to buy. Get them here. pic is what they look like but not my pic.
  21. dart454twinturb

    Brand new 18x9 18x10 black saleen wheels with black locking lugs

    I have a brand new set of 18x9 and 18x10 black saleen wheels. They are brand new in box and ready to go. I will also include a brand new set of black locking lug nuts with key. THese wheels have seen no run time at all being they are still in the box. Would prefer local pickup in Topeka ks but...
  22. dart454twinturb

    99-01 cobra IRS assembly

    I have for sale a complete IRS assembly out of a 1999 cobra. It is ready to bolt in. Great upgrade for handling for a gt or v6. Will include all brake components, brake cables, brackets, bolts, everything to do a swap or replace a worn out one. THis unit is in great working order. Prefer local...
  23. dart454twinturb

    what coils and plugs?

    What coils is everyone running and what are your power levels. I am looking to push between 1000-1100 and was wondering if my oem ford coils would be fine. Also what is a good set of plugs? I was looking at the autolite AR-93 plugs
  24. dart454twinturb

    What intake for my cobra??

    I have been doing a lot of looking lately at different setups and there is a lot of conflicting opinions on intakes. I will give you my setup and my intake options and see what you all think. Engine setup stock block stock crank billet I beam rods Diamond forged pistons 10.5:1 comp all...
  25. dart454twinturb

    twin or single turbo??

    Looking to get opinions. I am currently building my car up and was wondering what everyone recommends. Go with a big single turbo or smaller twin turbos. This will be a street car that may occasionally see the track. Wondering what will be the better setup. Thanks

Top