Search results

Subbing for progress updates

It's nice to see different approaches and the reasons. Options Since OP is doing cams, in his second phase, wouldn't an approach be to do the following items when cams go in? (I cut and pasted from the OPs post) -->oil pump gears, crank sprocket and other timing components OP is doing a...

Can you elaborate how an aftermarket balancer (10%)... vs the factory size and option, decrease breaking stuff as outlined in your 2nd talking point? I'm genuinely curious where you got this information and/or data? 2. It decreases the chance of breaking the oil pump gears, crank sprocket and...

$45 + $20.00 tip Zero Fade every 3 weeks Wash Hot Towel Same girl for 7 years now

:ROFLMAO::ROFLMAO::LOL: At first, I didn't know how to take your response. After the 4th read, I laughed That works too. I have to drive to the lift I use It's usually way hot under there

Thanks for sharing

Very sharp looks tasty

To piggy back... If I sent my car to JDM this month, around $23k is what it takes to sit at the table and play. (Not including shipping) That's the engine R/I, built motor, street cams, retuned, 900rwhp on 93. I think redline is increased to 7400, but don't quote me. Currently auctioning a...

Like @2011 gtcs stated, JDM $23,000.00 If you want to get a general idea of cost

"wet spot, needs investigation" Is what she told me Saturday night. I investigated. I would say yes, During filter removal, oil will rain down on that area. I use a wide sheet of aluminum foil to cover that area before taking the filter off. Than discard the filter and the aluminum foil...

save your money you already messed up by not going American Racing headers Don't compound the issue I am 100% clowning!!:ROFLMAO: You will like the Kooks

If your sticking with 93 octane, you'll be fine on the stock unit My setup worked just fine on a 80k car Sometimes, marketing is a real thing

Absolutely So glad that 2010, 2011, and 2012, that me and the wife had our Terminators and were able to go to Knotts for the weekend. Meeting people like EBCobra, 50Deep (Sig Wheel), @Steve@TF was something never appreciated until many years later.

It's gonna ride like shit 4x4 package, non fx4 3" radio screen not even "info-tainment" Will need Coke bottle glasses to see the screen (extra cost) Hard Pass:ROFLMAO:

ya most EVs aren't running 315/35 20's :ROFLMAO: Saw a side by side shot of the 2 variants

Edit: I'm from Wisconsin, if your location is correct, who in Wisconsin tunes these cars? Because I know of no one WIth that being said, To your question, "Or anyone in WI that works on these motors or rebuilds them and sells them" If, the engine is hurt you have some decisions to be made and...

**see other thread

Did you also know that some versions have what's called "acoustic foam" inside the tire to reduce road noise? I didn't till I stumbled across an article

Carbon Fiber Driveshaft DR3Z-4602-A

Thanks for sharing this

The shiny one

When you say that outside means outside, is that like, well, would I put that side outboard facing?:LOL:

I learned something too

It's a 4.5 But ty for looking out W/O a built motor, a 3.4 or 4.0 is already "to big" imo Leaning more and more towards a 3.6 kenne bell, although, not my 1st choice

its here its here totality eclipse geeks