Separate names with a comma.
I would start with a compression test and a leak down test anything between a 5% variance. Should not be alarming. 10% normally the general...
Yeah T56’s are naturally noisy transmissions. The sound dampening properties for the transmission tunnels is almost none existent.
You should most definitely run a 26 inch tall tire with your set up. Just do your research on proper compound and tire pressure and ambient air...
If you are serious about finding a set of DB9 Heads for a 03/04 Cobra let me know. I can get them for you. Ford is on some serious kool-aid for...
IMO depending on your IAT2 and Ambiant that timing does seem a little low. You could most definitely throw another 2-4 Degrees without any issues...
So I can 100% Confirm that a new Gen 3R 2.65 VMP TVS is coming for the 03-04 Cobras. I have it pre-ordered. I was told that they are about 6-8...
I've had very good luck with Woolite and water. 10 parts water - 1 part Woolite, 6 to 1 for more dirty spots. Tuff stuff works as well.
Well, feel free to message me. I can shed some insight on cams + ported heads. They go hand and hand together. The more power you make, The more...
Ah fair enough, But honestly its the truth because my Mach system failed about a year back and have never gotten around to fixing it. But if I...
Ill put in my vintage input. If you do decide on a bigger radiator, Thicker, Etc. I highly suggest you box your radiator in and take a real good...
The Supercharger. :)
Well to be fair, Stanley owns, Dewalt, Mac, Proto, Blackhawk, Facom, etc. Not saying that's a bad thing. A good bit of Protos, and Mac's stuff is...
I have several things from HF. Lets see... Daytona Jack 3 ton. (Its kickass) 1 year hundreds of uses 2 ton steel low profile (Also kickass) 4+...
I'm on my 3rd Napa alt. But honestly, heat kills these things far more than anything else.
I've always used Vitons with my cylinder head rebuilds. No problems in two years so far. That's over 30+ sets.
Quite a few good points here. I've had to replace my snub idler bearing 3 times. (National) In 25k miles. The tension is rather rough on the...
Yes they do. Depends on the setup alot however, In stock form the vert's are alot less rigid than the coupe. With this being said, both the coupe...
They are very easy to rebuild, I've rebuilt dozens of sets of these. I used to work at a powder coat shop and you need to replace the seals (They...
I've been running Amsoil ATF for the past 25k miles with no issues. I change it once a year however.
I have two used FRPS sensors F8CF-9F972-BH. Working when pulled! feel Free to send a message if you have any questions! Thank you! Paypal...
Sold! Thank you for looking!
So I've been fighting some flow issues for awhile now, I went from a Jabsco back to stock, I bought a brand new pump from Ford, and still having...
Do you have any of these in stock by any chance? I'll attach a picture below on what they look like. If you could provide the size/thread/pitch it...
So the other day, I managed to nail a dead animal with the Cobra, it got scooped up and hit my HE, Its not leaking or anything but its pretty...
So I've been looking around to find a sealant to go with 845. Don't get me wrong 845 is great, But I'm looking for another layer of protection....