Separate names with a comma.
Sorry for the old thread.
Something I've wondered. Since oil expands with temperature, do you check level when warm or cold?
E85 will give you the biggest power boost after you deal with breathing. 1320 junkie can add quite a few hp with a port job.
You'll need a...
Flush it the other direction also, something could be wedged in there.
Sorry, just saw you changed plugs. Check again for vacuum leaks. Clean MAF just for giggles. Double check all electrical connections for...
Replace the plugs. That's what they do when they go bad from too many miles. Spark blowout.
And copper plugs are only $25/set
Make sure you flush the diff cooler also or your rebuild won't last long.
In case nobody has answered, I'm having the same issue. I switched back to stock and now have the same issue, but I think the camber is sloppy...
Six Speed Parts & Rebuilds - 2007-2014 Mustang Shelby GT500 - Page 1 - Tick Performance, Inc. $2300.
I've tried all of the above suggested...
I'm giving most of it away to a mustang shop I realized was down the street. Didn't want to just throw it out. Need to be out...
Mine started doing this after I ported the intake. I was told by a tuner I need to get a tune adjustment for intake volume.
Maybe it is...
If you need to replace it, talk to J2 fabrication. They've got it figured out.
Sorry, still using the blower.
If you pull the intake get a couple things.
-3 gallons of the GM style orange coolant,
- high quality hose clamp pliers. For illustration......
Get a shop vac and try to pull as much coolant out of the front holes as possible before you lift the intake. Itll dump a lot of coolant down the...
Moving to a place with less storage, need to sell parts.
-Axle and extras $800, 3.31 gears and 3.73 gears (launched with them)....
Thanks, but already found one.
Sorry about that.
Checking to see if anyone has a spare GT500 supercharger belt tensioner they'd like to sell.
Hi, checking to see if you still have the gt500 belt tensioner for sale.
This is old but, still have the front engine cover? Broke a pulley off
Still trying to sell this?
Think I found a reason my IATs are hot, the intake tube has huge gaps around the air box. I siliconed it.
I used a level as a straight edge. My nozzles are 1/4" from the knock sensors.
When I start it up after playing for a few minutes it's up to...
Something I should probably already know, but haven't seen before.
I just pulled plugs to check them and noticed a white powder on the 2...