Separate names with a comma.
Even though its a pain in the ass, it would be better to disassemble the connector end and fish the wires out. Thats how I did mine. Just...
oh man! that sucks! glad there was no injuries, thats more important.
How much of the Emissions stuff has been removed from the car?
You can get the car retuned to have certain things working again or readable.
Yes, KW's V3 kit also puts the rear spring in the stock location. Nice to see BC doing the same.
I have the KW V3 setup on my car. I had the...
what do you mean by skipping?
Welcome and Congrats!!
Looks like it has some very nice upgrades over stock.
Sounds like a well taken care of weekend/show car.
Being that it...
P1414 - Ford Diagnostic Trouble Code (DTC) Definition, Causes and Diagnosis
P1445 - Ford Diagnostic Trouble Code (DTC) Definition, Causes and...
check the classifieds and FB pages, im sure you can build up a nice 4v motor with whats out there these days.
did you use a pre made harness or did your own?
Double check your wiring
build what you have.
That Baseline stuff works really well.
According to the 1995 FSM, on page 03-03-5
I will check my FSM tonight for you if you dont have the answer already.
Yes, I know. The IRS subframe has the hangers for the tailpipes, but Where do the brackets for the muffler hangers bolt to? See the answer below.....
I left them in there when I did mine. You will still need a place to hang the exhaust/mufflers from.
Maybe some CCWs, or Iforged or TruForged type wheels that dont have a stupid lip inside the barrel, and those S197 brakes. Was inclined to hear...
damn. that sucks.
stupid barrel on those Boyd wheels.
You might have to bend/reposition the body tab (that holds the hard line/brake hose) if the brake hose seems short, to give the hose the extra...
Id try and find a different shop. Thats the problem these days. Many claim to be professionals, but are far from it.
As far as the noises coming...
As long as the bleeder screw on the caliper is at the highest position, you should be ok.
Get your tune figured out before it causes any further problems/damage.
Have a look into the Kenny Brown "Rear Steer" kit and replacement outer rod ends.
Kenny Brown IRS Rear Steer Kit for 1999–2004 Mustang SVT...