Search results

The hitting clip

Sensor

Have this JLT high boost, just got my MAF For it. (Vmp BA3000) doing so test fitting and it doesn't look right and thought I'd ask for a 2nd opinion. I feel like there should be a little rubber gasket on the bottom of the sensor as there is a groove that runs all the way around it. s And the...

Hey fellas so my girlfriends mustang is in need for some new tires. She has a standard model 12 v6 manual trans. Stock rims. Was wanting to run the MT sport comps all the way around. There is a 235 45 17 and a 245 45 17 that MT offers. Anyone know if either of these sizes will fit without any...

anyone running the koni adj. rear shocks? its a 03 cobra vert. the stock ones are about to be the point where they need replaced. figure mine as well get a little better shock. just curious how they feel and some input. any recommendations for another manufacturer with the price relatively close...

time to upgrade. on my car currently is the steeda one on the drivers side. but i get alot of oil into my intake on the other side. would really like to do a 2 into 1 setup. just wondering if any of you guys could give me some advice or show me the style your running. ive seen the moroso catch...

In the market for water meth kit. Came across a Devils Own kit for a reasonable price. Sounds like a nice kit. Never heard of that company just curious if anyone has any experience with that kit and or heard of it. Thanks - Ryan

hey guys, i got a 306 with .090 angle milled AFR 165s, 10.6:1, x303 cam, equal lengths and h pipe. aluminum roller rockers, forge rod & pistons, motor is fresh. have a Holley 750 double pump for it. trans is a built c4 man vale body. stall will be 3600 rpm. 3;73 gears. trying to decide on a...

hi guys got a 2.8kb with a 3.5" pulley. all other pulleys stock. need to reduce belt slip. going to be installing a tensioner pulley. just seeing what size you guys are running with similar setups. thanks.

got a 98 csvt with a cat back exhaust and a cold air kit. have this tuner for my 03 cobra and just thought i might be able to toy with the contour. loaded my sct disc and it says there isnt any tunes for the contour. just wondering if you guys know if i can custom tune that pcm. thanks

hey guys i have a 2.8kb with a 3.5" inch pulley. its a 20.5psi pulley and was wanting to go to a 3.25" (22.5psi) before my new tune. KB says it will use the same belt but needs a different altenator pulley. their book fails to mention the size of course. just courious if anybody knows the size...

hey guys i been workin on this car for a while. my engine builder and i sat down and did the math for my injectors and they came out to be needing about 70lbs. so i didnt want to undercut myself and buy 60's when 80's are the same price. (future mods) anyway i cant find someone to tune it. they...

wondering if 80lb injectors would work on a pretty much stock fuel system setup. got a kb boost a pump. and stock pumps. i obvioously know i should do this or that to support these injectors better, but im asking will it work. kb bap manual seems to say i can pop them in with nothing else. i...

hi guys i have a 03 kb.my wiring harness fried and ccrm fried so i replaced all that and still runs like crud. pull out the kenne bell switch chip and runs way way smoother. kb denies any problems with their chips what so ever. but it only make sense to me that would be the problem. i cleaned...

had my cobra fixed today, the ccrm was melted and the wiring harness was melted as well. installed everything on and the car would run a little better but under heavy acceleration it would still stutter and act up. i pulled my kenne bell chip out and it was crisp and nice acceleration. i called...

just curious what idle pulley would be the correct one for my setup, i hear 100mm and 92mm wont work for me, trying to prevent belt slip. my current setup is a 2.8kb with a 3.5 inch pulley. rest of the pulleys r stock. thanks

my 03 kb has been doing some funny things lately. and it threw a P0750 code wich is a transmission shift solonoid A. could be mistaken but i though the only shift solonoid on that trans was the reverse lockout deal. Anyone have any input i would apperciate it, thanks.

having some issues w my 03 kb. runs fine and then starts stuttering and all the lights on my dash go crazy. then goes back to normal. i thinking pcm but it has all powers and grounds. and a buddy from ford said theres a fuel pump driver module tied into the gauge cluster and said he herd of tht...

just wanting to learn more about the affects of changing pullies. i know the smaller the more boost for the most part. but i hear changin the lower can provide more torque, just wondering if there is a good site or write up with a basic understanding on the effects and causes of changing...

hey guys my 03 kb cobra is doing some funny things and need some ideas as i seem to ran out. under cruise a it runs good and if you slowly bring the throttle until redline is reached is good, but if you stab the gas it falls out keeps running but has no throttle response at all and my odometer...

hey guys, my car runs great while just crusing normally, but when i even stab the pedal halfway down it falls on its face and dies, wait about 10 seconds and fires right back up. P0133 code read wich is 02 sensor slow response bank 1 sensor 1, and ideas? anything like this happen to anybody...

hey guys new here and this is my first post so thank you for your time first and foremost. im buying new 80lb injectors seeing if you guys had any input or any better luck with certain brands. thanks.