Separate names with a comma.
aftermarket tensioners are very good, just ensure you use those that are metal.
Aviator engines require you to use the cobra oil pan and front...
only when adding long duration cams
4v and 2v blocks are the same. 4V engines used Romeo, WAP and teskid blocks. 2Vs used WAP, Romeo and Windsor block.
yes, you will need C heads...
I say use the teksid and a PD blower. The blower looks much better than the 96-98 intake.
Same goes for any block; iron, wap, nemak, teksid, 2v, 4v....doesn't matter.
I use a small cordless impact to remove the screws, works great
Adding some heat to the plate around the bearing will allow it (bearing) to...
Aftermarket throttle bodies add zero power and offer no other benefits; a serious waste of money.
A turbo system requires and aftermarket K...
Do not use iridium plugs.
probe pistons are fine
Do you need forged internals? If staying n/a the answer would be no. An affordable fix would be an engine from a marauder or aviator which have...
You obviously have no experience with these heads. I've milled them .060" many times and .040" even more and sometimes on boosted engines. There...
I can work with Matt on the cam specs since they'll have to work with the pistons.
I no longer make short runners. Contact Matt Hayes at [email protected]
I can do a set of custom grinds for $1325 shipped.
those cams will require springs and retainers. I sell custom cams that use the stock springs if you're interested.
Compared to C heads, Bs need longer durations to make power. An off the shelf option are the Comp 106400s. I've done some custom cams for stock...
Longer duration cams require longtubes. Also, I don't recommend either of the cams you mentioned for a B headed engine.
mill heads .040"
intake valve reliefs
1 3/4" headers
is the engine stock?
1 7/8" is too large for a stock cube, stock cammed engine.
Coating will minimally reduce underhood temps.
IMO, color is not important when asking which headers one should install or which gears are best.
this could be it.
Why, regardless of topic do people include the color of their car? Someone asks an engine question and in doing so mentions the color of their...
Any that have 1 3/4" or 1 3/4" -1 7/8" stepped primaries. ARH and Kooks are the only options right now.
My guess is that moving the cams and adding larger headers will add 50hp at 7000. The larger headers will help a lot due to the short exh duration.