Search results

  1. BlueSmokem5.0

    Finally hit the track with new custom turbo kit

    I finally found time to go to the track with my new custom single turbo kit I built a few months back. It was a lot of work and installed a TH400 at the same time. Very pleased with how everything went 1st time out. 1st full pass ran 9.40@144 on 10-11psi, 2nd pass was 14psi ran 8.94@151 and 3rd...
  2. BlueSmokem5.0

    Almost time for bewst!!!!!

    Well I've been working on my own single turbo kit over the last few months with the help of many friends. I ordered a 80/96 billet wheel BW turbo from Forced Inductions, 5"x28"x13" Garrett intercooler core, 60mm Precision WG and Tial 50mm BOV, On 3 triple hat with 3- 465's, ID1300s, TH400, PTC...
  3. BlueSmokem5.0

    FS: Circle D 4C 245MM converter

    FS - 2011-14 Circle D 4C 245mm torque converter. Works great and still has warranty. $750 OBO
  4. BlueSmokem5.0

    New PB and possible record?

    New PB with Nitrous Express direct port system. I haven't had much time to post lately but I ran some good passes at Orlando recently with my last pass being 9.69@141mph with 1.35 60ft. Curious where I stand in the rankings of nitrous powered coyotes? I'm currently running without passengers...
  5. BlueSmokem5.0

    New PB at NMRA kick off in Bradendon!!!

    Had a blast this past weekend with good friends I've met right here on this very website; Brett, Austin, Jim, Sai and many others!!! The 3 of us Brett, Austin and myself ran in the true street event and had a blast doing so. Durring testing i got a new PB 9.89 @138 & 1.40 ,60ft. Well I managed a...
  6. BlueSmokem5.0

    upgraded clutches and shaft in my 6R80

    Well last night me and the mad scientist "HONDASAKI" ripped open my 6R80 to replace the clutches and intermediate shaft with some better Exedy stage 2 clutches and a billet intermediate shaft. Here are some pics, and big thanks to Brett for the rebuild And Justin at VMP for get to the parts here...
  7. BlueSmokem5.0

    FS: NX coyote HO upgrade parts!!

    FS:Anyone interested in upgrading there NX coyote plate kit? I have the modified parts for the 400 HO NX kit!!! Includes modified coyote plate , .120 nitrous solenoid , .187 fuel solenoid, 2ea 18" 4an lines , 40 amp relay, misc fittings and all jets!!! $300obo parts are less than 3 months old.
  8. BlueSmokem5.0

    New NX direct port and safe fuel cell install !!!

    Well here is my new NX direct port system and stand alone safe fuel system with built in pump and regulator. I also added E85 to the mix for a 250 shot as well I added LU47 injectors. I would like to thank Garrett and everyone at Nitrous Express for there help putting this all together!!! Now...
  9. BlueSmokem5.0

    Switching to E85 ??

    So I'm switching to E85, there is a place to buy it not to far from me and I'm tired of paying $11 per gallon for VP MS103 !! My question is I hear a lot of people talk about pump E85 being inconsistent, so can you buy a drum of E98 or straight Ethanol and mix it with E85 to be sure your getting...
  10. BlueSmokem5.0

    battery relocation ???

    So I need to know how to make sure my battery on/off switch shuts the car off like it should? I read somewhere that the alternator needs to be wired separate or just to shut off the fuel pump with the disconnect switch ? Not the best electrician , but I tried to do this on my 98' GT and fried my...
  11. BlueSmokem5.0

    Oil pan diapers ???

    Who knows the requirements for a oil pan diaper , I think its 9.99 ET ? Also who sells them and how much$$
  12. BlueSmokem5.0

    New PB on NX plate kit !!!!

    Made it out on Saturday to the coyote shootout at Orlando Speed world. Made 4 passes trying to get everything dialed in and on the 5th pass and last pass of testing before the race started I ran [email protected] and then in 1st rd of eliminations I ran [email protected] and lost to hondasaki's 9.99@138...
  13. BlueSmokem5.0

    safety requirements for low 10's ???

    Finally getting ready to go into the single digits, need to start buying some safety gear. What is required , what to buy or put on Christmas wish list? I think I should prepare for 9's. How many layer jacket, pants etc. ?
  14. BlueSmokem5.0

    coyote shootout postponed until next Sat !!!

    Well guys looks like we will be waiting one more week to meet up , I sure hope we can take this negative and make it positive by getting a larger turnout!! I was defiantly excited to get out there!!!!
  15. BlueSmokem5.0

    Do long tube headers require a tune revision???

    I have heard some say you do and some say you don't need a tune revision for long tube headers?? I already have an X-pipe but I cant understand how you wouldn't need a revision to benefit from installing them. I would think fueling and also timing might need to changed to help better scavenge...
  16. BlueSmokem5.0

    More Nitrous no gains!!!

    Well I went to Orlando Speed World yesterday, we had perfect weather and the track was working well. Ran 10.19@133mph and a hand full of low 10.20 passes all at 133mph with 1.40 - 1.44 , 60ft times. This was on a 250 shot through a high output plate that I ran 10.25@133mph on a 200shot the week...
  17. BlueSmokem5.0

    Sunday Funday at Orlando Speed World !!!!!!

    Looks like a cold front coming through this weekend should make for some nice weather and good racing Sat night 1320X from 8pm-1am and Sunday from10am-5pm bring your cars out guys!!!
  18. BlueSmokem5.0

    Nitrous 200 shot plate ???

    So I recently upgraded to the NX high output plate on my 2011 GT and went consistent 10.25 .27 .28 all night at 132-133 mph with 1.40- 1.42- 1.44 60ft times. Seems like its tapped out was hoping for some 10.00's but don't think its gonna happen with the current 200 shot , stock intake manifold...
  19. BlueSmokem5.0

    Any N20 coyote running 9's ???

    Just curious how many guys are running 9's on N20 plate kit or even direct port setup and how big of a shot and supporting mods??
  20. BlueSmokem5.0

    New PB at Orlando Speed World today

    Well finally cooled off just a bit here in Florida to go out and make some passes with everybody in Florida today LOL. Air wasn't as great as I had hoped for and still struggling to get this new set up to fly, but it did go 10.47 @ 132.32 mph w/ 1.57, 60 ft and went 10.50 @ 133.47 mph w/ 1.56...
  21. BlueSmokem5.0

    what oil for newly built engine?

    So I built my short block this summer got about 300-400 miles on the break in oil and 16 passes. When is a good time to run synthetic? I ran Mobil 1 before and the engine looked amazing when I tore it down.
  22. BlueSmokem5.0

    Guys running Viking adjustable Rear shocks??

    What front struts are guys running on their cars that have Viking double adjustable rear shock for street / strip? Does Viking make some nice front struts?
  23. BlueSmokem5.0

    VP MS101 Fuel question with NX plate 200 shot ??

    Going through some tune revisions to get things dialed in right now but I'm curious if there are any other people running VP MS101 in there cars? Info on the fuel its 97 motor octane unleaded oxygenated and the stoich A/F ratio is around 14.3 - 14.6 . My question is that with the new fuel my...
  24. BlueSmokem5.0

    Lean Issue Problem !!!!

    I recently built my engine with forged goodies added a Vortech BAP stock injectors , running VP MS101 fuel. Got everything running good with plans of running the 200 wet shot through my NX plate kit with the small solenoids. I got the car dyno tuned made 577whp and 636wtq, but at the track I...
  25. BlueSmokem5.0

    Happy new VMP customer !!!

    Well today I visited Justin and the guys at VMP, I recently built the short block in my 2011 Auto GT . I maxed out the Nitrous Express plate kit I have with the 200 jets and added a NX 4 controller to soften the hit. Well Justin made me a nice driving NA tune for the car and a Nasty NA tune :mj...

Top