Search results

  1. B

    WANTED: Looking for 96-98 cobra cams

    Please message or respond here if you have a set you are looking to sell. Thanks! Sent from my iPhone using Tapatalk
  2. B

    Clunking noise from rear

    I appreciate it guys! So it is the spider gears and from what I’m finding out is that you can replace the spider gears on 13/14 with track pack. Would would be a good upgraded differential for street use? Making 1000+ rwhp street car Sent from my iPhone using Tapatalk
  3. B

    Clunking noise from rear

    Hey guys, I took my car out last Saturday and had a few runs. Driving home I noticed heavy clunking sounds when making turns from the rear end of the car. Anyone have this issue and what was the repair? Thanks!
  4. B

    TPS signal wire 0-5v?

    Thank you very much! Pin 1 was it
  5. B

    TPS signal wire 0-5v?

    It is a 2014
  6. B

    TPS signal wire 0-5v?

    Hello, We are trying to install a fly by wire setup for nitrous. Does anyone know which wire is the 0-5v pin or wire on the tps? A pin diagram would be great too. Thanks
  7. B

    Intercooler hose routing

    Which line goes to the top and bottom of the intercooler? I’m assuming the cool water which comes from the bottom of the heat exchanger goes to the top port of the intercooler? Sent from my iPhone using Tapatalk
  8. B

    FOR SALE: Twin turbo hot side

    This is kit is from THP(turbohorsepower.com) this is the t3/t4 hot side, 38mm Tial wastegates, downpipes, h-pipe and bassani cat back. O2 extensions with vband clamps included. You can get them ceramic coated and they will be good as new. 2000 obo Sent from my iPhone using Tapatalk
  9. B

    Hello I wanted to get an estimate on widening my wheels. Can you message me your contact info

    Hello I wanted to get an estimate on widening my wheels. Can you message me your contact info
  10. B

    Mcleod rxt clutch to flywheel bolt torque spec

    I talked to a tech at Mcleod and they are 35 ft lbs Sent from my iPhone using Tapatalk
  11. B

    Mcleod rxt clutch to flywheel bolt torque spec

    Anyone know what the arp clutch bolts to aluminum flywheel torque specs are? Sent from my iPhone using Tapatalk
  12. B

    Crankcase exhaust pcv evacuation

    BPS Crankcase Exhaust Evacuation System U002 Has anyone used this setup instead of using a vented catch can? I was wondering what the pros and cons of using this setup Sent from my iPhone using Tapatalk
  13. B

    Priming new engine

    Hey guys I just received my motor from MPR. Specifically states on the paper work to prime the motor before starting it and using the starter will not work. I would like to hear how you guys did this. Sent from my iPhone using Tapatalk
  14. B

    2013/14 GT500 Engine and Transmission & Underhood Wiring Harness Drawings

    Does anyone still have those images? The ones posted are not working Sent from my iPhone using Tapatalk
  15. B

    Does ATI 15% Lower fit a 13/14 Track Pack Shelby

    I noticed you have a custom fitting there. Where could I get that from?
  16. B

    Nitrous Outlet - GT500 - 15lb bottle, Plate Kit

    Do u know if the throttle body plate would work with a kenne bell 168mm throttle body? Sent from my iPad using Tapatalk
  17. B

    Gt500 stock hood $350

    I have a black one with the stripes. Sent from my iPad using Tapatalk
  18. B

    Methanol injection

    When you say "too much" was it flooding it? I plan on using it on my 3.6 kb and from what I've been reading they get much hotter than the tvs. If it is running much hotter then it should vaporize it and hopefully get the cooling effect. We'll see what happens. My motor build is almost done. I'll...
  19. B

    Methanol injection

    So putting the nozzles in front of the throttle body didn't help? Wouldn't it cool the blower as well? What size nozzles did you try in front of the throttle body? I plan on running a higher water content for iat2. I run e85 so I'm not concerned about octane. Sent from my iPhone using Tapatalk
  20. B

    Fuet hat with dual 465s walbros $350

    Need PayPal address Sent from my iPhone using Tapatalk
  21. B

    Fuet hat with dual 465s walbros $350

    Pm sent Sent from my iPhone using Tapatalk
  22. B

    How much power are the stock heads good for?

    My goal is to make about 1200 rwhp and I have the bottom end built. Now I don't have the heads on there yet because I heard with the stock heads that kind of power can't be reached. My plan is to go bigger blower of course. Can 1200 be done with a bigger blower with stock heads? Sent from my...
  23. B

    2.9 Whipple & SCJ Monoblade

    Is that a crusher inlet? Sent from my iPhone using Tapatalk
  24. B

    2014 Shelby Gt500 heat exchanger

    Pending sale. Will update if it falls through. Sent from my iPhone using Tapatalk
  25. B

    2014 Shelby Gt500 heat exchanger

    Still for sale

Top