Search results

*Posting for my uncle* This car is very clean and very nice. ONLY 21k miles. Has a roush cold air and non factory pipes. Not looked under it to see what they are, but they have stainless tips. Black with black leather interior. The seats look like they have never even been sit in. This is a 5...

Driver door On driver side hatch Driver mirror On dash in front of steering wheel. Never noticed. Was from where windshield hit. Shot with FE210,X775 at 2007-07-15 Interior shots Sorry for junk in trunk It does have a rebuilt title. If that...

Sold! SOLD!!! 2003 Silver Convertible. Need to rid of payment. Car new MSRP on window sticker is a bit over 39k. Around 6k in mods. 931-319-0588 or email at [email protected]. Thanks for looking. Gene

My uncle wanted me to post his car on here. It's a white 99 cobra with the chrome 95 cobra r rims with about 3k miles on the tires. 90k miles and does have a rebuilt title. He has driven this car since 40k miles so car is perfectly fine. Was a roll over but no drivetrain damage was done. He...

It does have a rebuilt title. If that is a problem then i totally understand. Anyways, it is a 02 with 43500 on the clock. The car had 18k on it when i bought it. Strong running car. Was rolled and the body was all that was hurt. Body was replaced with a used one off another car. No cut and...

I installed a irs brace about 6-8 months ago and everything is great, except, I recently moved into my new house with the garage and noticed the diff is leaking fluid around that crappy lower bolt. What do I need to do to fix it?? I checked the fluid tonight and it was not finger height so I...

Looking for a 02 SVT front bumper.. If you have one please shoot me a message with price. Thank ya.

My mods: 2.80 pulley with idlers, xpipe, catback, drag radials, ported eaton, gordsford HE, SCT tune, NO spray this time.. His mods: 2.76 pulley, headers, ported eaton, xpipe, weld in flows, drag radials, diablosport chip. Both had 1 passenger each with him and his weighing less than me...

1 wheel hop and BOOM! The diff cover was shattered.. what do we need to replace in there? Cover, add a diff brace, fluid, and what other possible things to change? What kind of fluid it take? 90 wt? Thanks.

I recently went to a great tuner and while my car was being tuned, the datalogger kept kicking him out of his program while trying to tune it with a chip. So, he used a X CAL to tune the car and it ran fine and everything seemed ok. Then, he took the final two tunes and put them on the chip...

502/491 all motor 23 degrees of timing 582/644 with 100 shot and 16 degrees on timing 470 rwhp on nitrous tune without spray 2.8 pulley, apten port, 4 idler pulleys, off road x pipe, borla catback, 100 shot. Tim made the tune conservative enough that he was comfortable with it and that is...

Let me know your price shipped please. Send pm's. Greatly appreciate it.

I have a 2003 cobra with exhaust, cold air, 2.8 upper, ported eaton, gordsford intercooler. I am going to install a BAP and a mafia mass air extender with a wet nitrous setup. I am making 476/481 on a loaded mustang dyno. Will I need bigger injectors if I do a wet kit? And instead of doing...

Like title says. Looking to buy ASAP! Pm me with a price and what you have. Thanks.

like title says. Please pm me with prices and what you have. Thanks. Looking to buy ASAP!

ADDED MORE PARTS AND PICS BELOW sold--$80 shipped fedex for pro 5.0 for T56. Used for about 2k miles. Have instructions(for diff shifter but the same process), bolts, and the silicone needed. Thanks. MSD window switch.. Has 3k pill only for start and have 6k-6900 pills. $75 shipped...

What you guys think would happen? We are gonna run them as soon as he gets his cutting out problem fixed. He is the 06 turbo, 10 lbs of boost, exhaust. Has 20" rims(extra weight), street tires, and plus whatever the 06 weigh. Made 489/501 mustang dyno 85-90 degree heat. Mine is the 03...

Seen several diff oils... should use the stock blower oil through ford or like a 10w30 or something?? Thanks.

Cracked the head on mine from exhaust valve through the spark plug hole. Need a good used head. Thanks.

Did you cut from the bottom or from the top of the spring? What did you use to cut them? torch(sp)..? I am prob gonna do 1/2 in front and 3/4 in back. Are you guys measuring from the tip of the spring across for 1/2 coil? And at like 3 o'clock for 3/4? I don't wanna drag and scrap everywhere and...

1st of all sorry for long post! Took the car yesterday to a mustang dyno. They put a load on the machine to make it "true" numbers, but dyno numbers are just numbers. Really took the car to see what my a/f was like. The guy who had my car before me reported it made 503 rwhp and 485 rwtq on a...

What should the lambda readings be on a 03 pullied cobra? The dyno shop that I use uses a lambda reading instead of the normal 10.0-15.0 reading that I am use to seeing. What is the diff. in the two? Thanks.

I can get a used solid GT 8.8 rear for pretty cheap.. What all do I need to do to beef it up a little or will it last with the stock GT rear and 500 hp? What will go first? Will be running DR with it. Thanks for all the reply.

My question is.. I was washing my car the other day and noticed that my blue paint on the license plate had came off all my letters... Can I paint them back any color I want or do I have to use blue or black..ect? Thanks.. In tennessee if that matters. Thanks.