Drained the rad today and snapped the end of the stock radiator drain petcock using a 3/4" box wrench.
Was able to open it to drain with an allen wrench. I'm guessing the allen wrench will shut it all the way as well. Turning it looser didn't seem like it would come out 100% of the way.
Haven’t seen much online on this other than the below article I found:
Ebay is making a MASSIVE change to seller fees and payment will take longer
I’ve used eBay for years, typically not very often. I usually keep a few things listed at a time BIN that I would have a harder time selling on a...
So had to return all the fuel and exhaust to stock on a 2.3L Whipple setup. It is the single blade made for an Accufab throttle which was on there previously.
Tried to run it with the stock throttle body last night and it idled and ran like crap. Came to realize the IAC slot in both the plenum...
Trying to get a shipping quote to move a wood burning stove from my cousin’s house from NorCal either down to LA or over to Arizona for some family.
It’s not packaged or palleted. I’m assuming it’s going to be pricey, but haven’t gotten a quote back from any random company other than PODS...
Here is the boat I am currently in.
2.3L Whipple and lower manifold are currently out. Having a going back to stock sale if you will due to emissions.
Had help to remove everything and it will go back in with the 2.3L and stock fuel system for the time being. Thinking ahead, swapping injectors...
It’s been a few years since the Whipple swap so I don’t remember much.
Is there any chance I can pull the passenger side fuel rail off while the blower is still in place? I need to swap the injectors out unfortunately.
Stock rails and standard inlet.
Has anyone ever coated/considered coating the factory headers in any sort of thermal management solution?
My mids have to go bye bye due to this fantastic state for now. I am debating getting JetHot or something similar to my factory iron logs to keep the underhood heat down. Especially on the...
I had my Cobra up with the guys at HPS Performance a few times over the last few months to test fit and install a new silicone hose kit for the 03-04 Cobras. I have been bugging them over the last year or so over the old 2 piece kit they offered, they now offer a much larger kit.
Looking at some fuel system cleaners for both the DD and the ponies. The Mustangs seem to sit quite a bit these days, but not full on storage for Sta-Bil I don’t think.
Tons on the market, just checking to see who likes what.
I remember years ago a Member (Mark?) that had a website where he sold safety and racegear such as Recaro, Sparco, and Torsen. Had plenty of pictures of Recaros in Cobras and Lightnings.
Can't find him or the site anymore. Does anyone remember any of the info?
These guys make some sweet looking catch can setups for various cars, unfortunately this mounting solution will not work with the older GT500s that have that AC canister in the corner. Is this something that might fit anywhere else, likely with some custom plumbing...