Search results

  1. B

    Pace setter long tubes or bassani mid lengths

    Currently have the bassani 5pc x pipe so the mids would bolt right up. Or I can go with the pacesetter and offload x for about the same price 750 either way. Anyone have any insight on fitment for either? I know I'll probably get more hp out of the long tubes. Plus the bonus would be being able...
  2. B

    WANTED: Wanted:90mm LMAF

    Anyone have one laying around? Couple on ebay but figured I'd ask here first Sent from my SM-G988U using Tapatalk
  3. B

    Sct strategy tunes

    What do these actually change? I know they don't really do anything. But I'm curious as to what parameters they actually change. Does anyone know? Sent from my SM-G988U using Tapatalk
  4. B

    Clutch adjustment

    So my clutch is at the very end of the pedal. I've tried pulling up on the stock quadrant and I'm not getting anything out of it. Possible the clutch is getting worn out? Pretty sure it's almost original to the car. Sent from my SM-G988U using Tapatalk
  5. B

    4.30s

    Installed mine today. Have to say I really like them. Car has a lot more ass that's for sure. Install wasn't too bad, had to tear it down a couple times to get the shims right but got a good pattern and absolutely 0 noise. Now just gonna have to see what I can do about the speedometer. Sent...
  6. B

    Welders

    Just picked this up for my birthday. Not too bad of a set up for 375 on Amazon. Tig/stick/plasma combo. It's my first one and I don't really know a whole lot but the plasma seems to work pretty good. Sliced up some steel with it last night. I wanted to mess with the tig set up on it but I...
  7. B

    Aviator intakes

    So I was looking into this because I was bored. Why isn't this a more common thing with the fr500 intake costing an arm and a leg? I know hood clearance is an issue but I assume if you found a junkyard car you could pull the tb, cable, alternator bracket and fuel rails. Some of the stuff I read...
  8. B

    FOR SALE: Factory ford convertible cover

    Off my 97 cobra. May fit new edge cars not sure Located in Central Illinois. Could meet halfway from Chicago, indy, or stl. I would also ship at buyers expense. 200 obo. No rips or tears would say 9.5/10 Sent from my SM-G988U using Tapatalk
  9. B

    JBA shorties

    There's a set on ebay rn about 200 shipped which I think is a good deal. Is it worth it? I'll be doing the install myself so labor isn't an issue. Car does have a slight exhaust leak on the driver side as well so be a prime opportunity to fix it. Long tubes aren't really an option for me. I...
  10. B

    Keychains

    I'm looking for a keytag key chain with the svt logo or cobra logo on it. Has anyone come acrossed anything? I've searched all over the internet looking and haven't found anything. Even reached out to an etsy vendor and still haven't gotten anything. I know it's a random question but figured...
  11. B

    Found this gem today

    1996 Saleen Cobra Convertible / 4.6L DOHC / 5 Speed / AC #198938 -... Appears to be real. If memory serves me right only about 110 of these cars in existence Sent from my SM-G988U using Tapatalk
  12. B

    Rear control arms

    Is it worth it on a weekend warrior to buy them? Car is still relatively stock except the exhaust, subframe connectors and march pulled. Have gears waiting to go in as well. I thought about getting lowers first and then uppers later. Not sure if I should worry about buying adjustable or not...
  13. B

    Central Illinois mustang show

    Going to be the first show I plan to attend in the cobra. It has 29 car classes and I assume it's a decent sized show Sent from my SM-G988U using Tapatalk
  14. B

    Chasing an issue

    So I'll preface this by saying I just did a full tune up with plugs wires coils and fuel filter. All ford brand stuff also cleaned the imrc plates and they are functional. Now I noticed my car just doesn't seem to have the ass it should. 245 cheap tires and doesn't really seem to make them...
  15. B

    Catch can

    Who has one and where did you mount it? I'm out of ideas on where to put mine. I'd like somewhere that is hidden but easy to empty. Prefer not to mount it to the plastic panel on the fire wall Sent from my SM-G988U using Tapatalk
  16. B

    WANTED: Wtb: March/Cobra R pulleys

    Looking for hydroboost water pump and alternator pulleys. I know I can get them new just checking to see if anyone has them used on a shelf somewhere. Water pump pulley would be the early version for 96-99 Sent from my SM-G988U using Tapatalk
  17. B

    Imrc cleaning

    Took my intake manifold off today. I must say for 28k miles these intake valves are disgusting. These aren't even the worst ones. Going to go though and clean the valves, plates and intake. Did have some oil in the intake so a catch can is also in order once I get the car back together. I need...
  18. B

    Compression tester

    So I'm in the process of doing some routine maintenance on the cobra. Spark plugs fuel filter oil change etc... wanted to do a compression test for the hell of it. So I picked up a kit at Harbor freight today and stuck on the 14mm thread adapter and for some reason it isn't threading in. It...
  19. B

    Factory hood

    Is the factory ford hood fiberglass? I'm pretty sure mine is just curious that's all. I would bet every dollar I had it's not factory paint. Sent from my SM-G988U using Tapatalk
  20. B

    Bassani mid lengths

    Does anyone know if there is a diffence in model years? I thought I saw something about number of egr bungs. Have a line on some headers from an 04 cobra just want to know if they'll bolt up to the b heads. With proper midpipe adapters. Sent from my SM-G988U using Tapatalk
  21. B

    FOR SALE: B&M shifter for t45/t5

    Pulled out and cleaned up the best I could. Springs are still functional as well. Just prefer the handle position of the triax 60 bucks shipped. PayPal only Sent from my SM-G988U using Tapatalk
  22. B

    Gears

    So I was going to go 4.30s on the cobra but they seem to be sort of scarce now. Is there really that much difference in going 4.10 instead? You can pick up a full 4.10 kit for about 275 bucks. If I wanted 4.30s I could find the motives when in stock for around 230 bucks plus buying an install...
  23. B

    6 inch buffer

    So I'll start by saying I really don't have a ton of cash to spend on detailing items. I know you get what you pay for but... just don't have a few hundred or more to dump into detailing stuff. I got a 6 inch orbital for chirstmas 18v ryobi 6 inch. As I said I know there's way better. Should I...
  24. B

    Early 2000s technology

    Got a used tuner from a guy here and had some issues so I decided to check the ecu for a chip and found this bad boy performance upgrade lol. State of the art year 2000 Sent from my SM-G988U using Tapatalk
  25. B

    Valve cover powder coat

    So I called a few local places and for 40 bucks plus the powder I can have my covers done. I was going to paint them with the wrinkle blue vht but figured for about 75 bucks this would be worth it. Now the real question. What did you guys do about the svt builder sticker on the driver side...

Top