Search results

  1. 1bdsnk96

    HPM Megabite Jr's

    Hey everyone I pick up some HPM Megabite "old school" rear lower and upper control arms from a friend which seem to be in really good shape but I was wanting to replace the the bushings for peace of mind, would anyone know by chance what or where I can find some good replacement bushings for...
  2. 1bdsnk96

    15x9 wheels 5.5 B.S

    Guys I have a 1996 cobra with the factory brakes I am wanting to know if anyone has ran a 15x9 with 5.5 B.S on the rear cobra brakes with out any modifications......I already know that a 15x8 with 5.5bs will fit with no mod and a 15x10 with6.5 bs will require notching the banjo bolt and some...
  3. 1bdsnk96

    03-04 cobra procharger kit

    I found a good running procharger for sale pretty cheap it comes with everything minus injectors and mass air, I would be getting this kit for my 96 4v I know I would have to do a c head swap but just wanted to get someones opinion on what they thought about this idea.???
  4. 1bdsnk96

    LCA swap

    I was going to swap my stock control arms for some used hpm megabite jr's I bought off of ebay but as I was going to start I noticed a bolt and small bracket for the emergency cable, well my question is what have everyone else done with the e-brake cable and this little bracket when doing the...
  5. 1bdsnk96

    Welder for Sri

    Guys I'm not real knowledgeable about welders as far as how or which metals they work on... So my question is when doing a short runner intake and cutting and welding the runners which kind of welder would I use to weld the runner back together? Mig?
  6. 1bdsnk96

    Short runner intake wtb

    I am wanting to see if anyone has a SRI done properly up for sale. Would be interested in a complete intake but a lower intake sr would be fine. Please let me know if you got something. Thanks
  7. 1bdsnk96

    Motive 4:30s

    Is there anything to worry about reliability on this brand, I just realized frpp does not make 4:30's anymore
  8. 1bdsnk96

    14.7 at the track

    I went to the track on Saturday and was not expecting my car to be as slow as it was I ran a 14.7 @93mph with a 2.2 60ft I was spinning through first on some nittos 555r. Although I was spinning I took my rpms to 7k like I had seen suggested and I was thinking that even as poor of a take off...
  9. 1bdsnk96

    Best Investment? Suggestions please?

    Guy I was curious in your opinion what would be the best investment a built engine or buy a supercharger, I got some tax return money and I have about 6k to play with, also could I still have a strong engine to run in the street if I build a engine for a boost application and don't actually get...
  10. 1bdsnk96

    B heads vs C Heads

    Does anyone have an idea how much is the hp difference between the b heads and intake vs the c heads and intake is. What's the most hp seen by each setup by you guys?
  11. 1bdsnk96

    Tips for better runs sn95 cobra 4v

    Guys I am going to run my car this weekend, I have some Nitto 555R DR's that I will be running my car with this weekend. I just wanted to get some input from you guys on any tips you can give me for a better run. I think ive heard to try and shift between 6k and 6.3K to get the most power from...
  12. 1bdsnk96

    Race tonight

    I ran a buddy of mine to see where I stand with my cobra, he beat me by 2.5-3 cars but my car has felt sluggish since I got it. Just curious if this is we're I should be ill post below my mods vs his (Mine) 96 mustang cobra 6-speed BBK LT & o/r x-pipe Slp lm1 Jlt cai Tubular k-member...
  13. 1bdsnk96

    aviation or race fuels

    Just a few questions hopefully someone can answer for me, i was curious if running aviation or race fuel would do any harm to my engine without tuning the computer for it, and if so is it worth a few pony's?
  14. 1bdsnk96

    Tuning Software/Programmer 96 DOHC

    Hey guys i have been looking into some handheld programmers and trying to find some softwares so i could tune my car a little better. Would you guys have any ideas on what is the best tuning software if nobody know of a software for our cars than any suggestions on the best programmer??
  15. 1bdsnk96

    B-intake into a short runner

    My question to my fellow svtpr's is what is it that actually gets done when someone says i have turned my intake into a shortrunner, is it porting....etc???? Im just curious?? :shrug:
  16. 1bdsnk96

    WTB 96-98 cobra intake

    I am interested in a 96-98 intake in good conditions, let me know on what you have and how much. thanks :rockon:
  17. 1bdsnk96

    96-98 cooling talk

    We my fellow svtp'ers I have a couple of questions first when talking about cooling issues, what is a TSB??? Also I got my car from the shop today for various upgrades but the coolant temp got me a little nervous without a thermostat the temp were getting up in between 195-210 and with a...
  18. 1bdsnk96

    Coolant Crossover tube

    Hey guys does anyone know where i can get a replacement crossover tube, mine is beat up bad it is very unattractive when opening my hood. If you can help me with this issue i would greatly apprecitate it.
  19. 1bdsnk96

    Electric Fan help

    I am having trouble with my electric fan, is it supposed to have two speeds because when my car turns on the fan turns on as well at a slow speed and once the car gets hotter it never kicks in a higher speed and carrys on to getting hott.:??:
  20. 1bdsnk96

    96 cobra t45 to t56 conversion crossmember mount issues

    Im in the prosess of doing a t45 to t56 swap but i am stuck at the crossmember mount i was told that the original mount would work when i bought the kit and it didnt can ya'll guys help me please im a little fustrated about this situation cause i aint too sure what to do. I have seen other tech...
  21. 1bdsnk96

    Help me keep my sn95

    hey guys i keep on thinking of getting rid of my sn95 cobra due to the fact that i am not an expert on modular motors and i been wanting to do my engine my self, i keep on getting these ideas in my head of getting an ls1 or foxbody since they seem a little more easier to tear apart and rebuild...
  22. 1bdsnk96

    15x8 draglites

    what backspacing would i need to run 15x8 draglites on my 96 mustang cobra and would i need to grind anything??
  23. 1bdsnk96

    brake swap for prostars

    hey guys i was wondering if anyone here has converted there cobra brake calipers and rotors for gt to clear the 15" welds with little to no issued as compared to the cobra brake calipers on front and back. If so can ya'll give some detail to what is was you did and what i would need to do that...
  24. 1bdsnk96

    15x10 prostar wheels

    hey guy i have a issue with my 15x10 prostars with 6.5 b.s and i cant get them to clear the banjo bolt even tried with a 1/4inch spacer wtf. can someone help me understand wats wrong:fm:
  25. 1bdsnk96


    :shrug:hey guys do ya'll have any good reviews about the mishimoto radiator out on the market