So I posted this in the newedge forum and found out that only the 99 has the coolant level sensor.
I took my broken sensor apart by scoring the bottom of the sheathing..the dorman part just pulls off.
I desoldered the old reed switch and resoldered a new reed switch on.
The original sheath...
ok..so I was trying to get the coolant level sensor connector off and the sensor pulled out of the tank.
The slender sleeve that protects the resistor pulled off and broke the wiring.
I have had no luck finding a replacement or finding electrical part number a repair video.
I would try...
Ok I pretty much know what is wrong and how to fix it, so this is more about what tester to buy.
1. Oem coolant temp is rock solid.
2. Aftermarket coolant temp goes up quite a bit (250) when I get on it, steadying out at cruise and idle to about 190.
3. After I come in for a landing...
Ok...so I plan to start troubleshooting this weekend. I need our backup car running!!
I plan is to fix speedo problem and see what goes from there. Problem is intermittent...and speedo working makes bucking go away...so problems appear to be related.
1. Run torque app to see if speedo works...
Panavise 1994-2004 mustang cell phone mount 75107-795
Adding this for pics:
Panavise hard phone mount installed.
Note: I found post this from Scottydsntknow and in no way am I putting this panavise mount down.
It can be bought here...
Ex-Facebook security chief, now Zoom advisor, says he still trusts Zoom for his video meetings
Considering the legendary Swiss cheese security of Facebook, I'm not sure putting the facebook security guy in charge is such a good idea for Zoom.
This is not the face Zoom should be putting on...
Ok..I got a hydroboost off of Amazon.
The body has 464A-4 cast number
My original hydroboost has 464A-7 cast number
There is a threaded barbed hose fitting that goes in my original.
It does not thread into the new hydoboost and the new one is not threaded at all.
The new hydroboost also seems...
I just wanted to post up pics of lower intake clearancing for MMR HCM.
I probably removed more material than was really necessary, but i did what I did.
I found that a file and hack saw worked best for me.
Depth of intake space above freeze plug is ~10mm.
Height of MMR fixture is...
ok freeze plug did not flip with the screwdriver/pliers method of removal.
instead it it just went in deeper.
it is on the top intake rests, where the HCM goes; so at least it will not get lost in the channels.
slice the center open with a sharp wood chisel and then pry it out with a...
I just thought I would post up a couple of pics of the two intakes.
The real difference has to be felt with your hands.
The AL Flashing shows a bit in the first pic.
1999 cobra "unfixed" (XR3E-BF 12-05-98)
1999 Pre Ford "Fix" lower intake manifold = 230 CFM
Ford part # XR3E-9S455-AC
I've removed the Airbox to replace the AC evaporator that I snapped off..dohh..
The AC was never blowing out of the center vents.
By looking this up, it appears to be a main (black) vac line problem from the bay.
I'm redoing the entire firewall with sound deadener, instead of the rat's wool...
This may be old news..but news to me...
ok..my MRT hood struts are 10 years old and fail when it's FL cold.
I've done a cursory thread search and haven't found a replacement strut solution yet.
I have found that the originals are 80# and that Cervini recommends 120# struts.
Admittedly, I haven't even measured the MRT strut lengths...
No more tip-toeing.
-Time for LE reform.
-Time for proper vetting, with real background checks and lie detector tests that actually check for crimes, not just truthfulness about committing past crimes. .
-Time for repeated psyche and drug evals, random and often.
-Time for open SOPs.
I just recently fixed my steering wheel slop.
First I was convinced that it was my steering shaft.
I based this on my having had a shop check it for me.
They indicated that it was my lower steering shaft and not my rag joint.
After removing the steering shaft, it was apparent that the shaft...
f4zz-3c611-a steering column boot seal (firewall)
Now before you say no-can-do, would 2W7Z-3C611-AA work??
or even the 2005-14 mustang part 7r3z-3c611-a
Bolt hole centers on my part is ~3-1/8".
Rubber bushing part is 2-1/4".
Inner needle bearing is 1" to 1-1/8".
Looking for the best price on two 275/40 17 rear tires. Have 10.5 x17 wheels.
Price is my main consideration.
Not sure how this works as far as price plus install and where...
Won't have $ ready until after next week.
Seems this may not be an isolated practice.
No wonder teachers and some parents don't want standardized tests that are not given out by the teachers themselves.
Aside: I recently signed to tutor in some subjects. The first tutoring offer I...
Starting to think ownership of a vehicle will be a thing of the past or for the wealthy.
It sure is getting interesting.
I've done some research.
Apparently there are only three battery mfgrs left: Exide, Johnson Controls and East Penn.
The East Penn Deka gets high marks, others are saying just get a 5 year warranty and replace it for free after three years...and wonder how that works with getting it checked...