This may have to be my next mod. I’m trying to lower IAT2s without doing an aftermarket Intercool just yet. I have a bigger IC tank coming and I’ll see what that does. This KB makes some heat and the stock setup isn’t performing very well.
Gotcha thanks, I’ll see what it looks like trying it that way. Hoses and everything still line up fine and it have good flow? Was a little concerned with posts about “aerating” the coolant but figured it should be fine with stock lines, intercooler, Moroso tank, and Afco dual pass.IIRC I opened the holes in the clamp and used the bolt that holds the pump bracket to the car. I didn't use the stock bracket at all.
Everything lined up fine. It's been under there for a while now. I did have the cavitation issue. I had to fill the tank up to be level with the inlet.Gotcha thanks, I’ll see what it looks like trying it that way. Hoses and everything still line up fine and it have good flow? Was a little concerned with posts about “aerating” the coolant but figured it should be fine with stock lines, intercooler, Moroso tank, and Afco dual pass.