SOLD: Built 4.6 Teksid Engine

95Cobra_Iowa

Active Member
Established Member
Joined
Jun 21, 2016
Messages
130
Location
Iowa
$10,995

Built 4.6 Teksid Engine 9.0 Compression Ratio
Fox Lake CNC Ported Heads with Oversize Valves
Pac Springs and steel retainers
Todd Warren Spec'd camshafts from Bullet Racing Cams
Forged Cobra Crank
4.6 Teksid Block cleaned .05 over with plenty of thickness left in bores. Just a cleanup.
Wiseco Boostline Rods
Gibtec Billet 3.557 Bore custom pistons
H13 Tool Steel Pins
Clevite bearings
Cometic Headgaskets
Melling BIllet Oil Pump
Felpro Gaskets
Moroso Oil Pan
ARP Studs
ATI Harmonic Balancer
Sullivan Lower Intake
Shelby Mike Billet Timing Chain Arms
Woodruff Keys
Ford Primary Chain
Accufab Secondary Chains
NGk Plugs

$13,365 in engine + Assembly
$6,566 in Head Work
$1,600 in cams
$600 in sullivan Intake

Went a different direction. Pay half price and get the engine ready to go now. I need it gone and no longer need this.
Cams were specified by Todd to run on a twin turbo engine.

Here a link to a Google Photo albums with all the pictures I have of the setup. https://photos.app.goo.gl/x61mFbFfwm4MbDCM7

It is in a crate and ready to ship ASAP

nqaCfij8vgbU1itmwwDYW-hLRzuateG0PTtH5JXX4Lnn_ac3XZQjTCY30YwENhcWehYxkdz=w1227-h920-no?authuser=0.jpg

gOcg6ZEXMkRB0HPR5GwPTx-Cn-RfURL5gfBlWQw-2UihqOkp06NY9cSglBTahcF_VB3PuZRX=w690-h920-no?authuser=0.jpg
Q_Vy4PAiwvZP3xmei3YS2471wYXuF7Fj5wKLl-9wHZ7M534UIPwQOp-O5ZvRVmRIzI-Kb2hC=w690-h920-no?authuser=0.jpg
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,685
Location
El Paso, TX
Solid.

Looks like an easy transaction for everybody.


Sent from my iPhone using svtperformance.com
 

Users who are viewing this thread



Top