Base Tune help

Hey all ,

I've followed the how to for wiring up a fore controller from a relay triggered by pin 10 and grounded to pin 3 on the fpdm.

Car primes and relay holds until prime cycle is complete.

Start the car and the relay chatters in a random pattern.

Ive ensured my positive is wire 86 to the relay as there is a diode across the coil.

Tuner initially had the pump duty set to 70 % and now revised it to 100 %.

I feel like I am missing something or maybe he is missing something.

Any one run into this when changing to a return system ?

I am using the Diablo intune 3 to load base tunes that are emailed to me so I can eventually get this on the roller.

Thanks

Sent from my SM-G960W using the svtperformance.com mobile app

Set fuel pump voltage table to 13v.

Sorted it out Pin 79 ( coil 8) didn't make the slot on the ecm and was pushed up against pin 80 (fpdm).

Sent from my SM-G960W using the svtperformance.com mobile app