96-98 Catch can

DaveWertz

Active Member
Established Member
Joined
Mar 24, 2019
Messages
421
Location
Hughesville Pa
After my tune is done in march, I plan on buying a catch can. What are some good ones out there for under 200. And I plan to just run the driver side and not both. Are they really worth the money on boosted cars and catch that much oil?
 

DaveWertz

Active Member
Established Member
Joined
Mar 24, 2019
Messages
421
Location
Hughesville Pa
I recently installed a UPR one on my 98 turbo setup. It is not their normal one, but they make a nicer setup. Tell them it's for a 96-98 Cobra. It is very high quality. Has an adjustable mounting bracket, quick disconnects, and braided lines.
96-04 Mustang GT Plug N Play ™ SC Oil Catch Can Separator
With you experience with it, how hard is this one to drain? Well, does it make a big mess when you drain it is what I should ask.
 

Slow 99

Nothing to see here
Established Member
Joined
Sep 12, 2019
Messages
387
Location
California
Get a Moroso catch can, I have one in my car that’s routed to both sides of the PCV which you don’t have to do but is recommended for a blower application. It’s very easy to drain depending on where you mount it. I had a post on one of the other forums about how much oil accumulated in the intercooler of my old set up because the previous owner didn’t put on a catch can for 30k miles. You can only benefit from running a catch can on a boosted set up.


Sent from my iPhone using svtperformance.com
 

Users who are viewing this thread



Top