Girodisc 13" rotors & Performance Friction pads

Girodisc (A1-011) 2-piece floating rotor set, fits Cobra/Mach 1/Bullit/Cobra R calipers. Comes with Performance Friction 97 compound racing pads (0412.97.16.44) for Cobra calipers and Hard Brakes titanium heat shield shims (D412). Pads are about 50% thickness. This set of pads and rotors were installed at the same time, so the rotors haven't even been through a full set of pads yet. They were mainly used for track days on my '03 Cobra before I decide to go to 14" brakes. I would not use these pads on the street, they will squeal and chew the rotors if they're not hot enough. They work amazing on the track though and will not fade. New, the rotors go for $775, pads for $250, and heat shields for $72.

Update: Heat shields sold, I'll do $350 + shipping for the rotors w/ pads, or $300 + shipping for just the rotors. I'll entertain offers for the pads.

Bump

Are these still available? How's the stopping power compared to stock (with stock caliper/pad)?

Still have them. If you're using stock pads, I don't think you'll notice more stopping power. That can only come from bigger brakes or more aggressive pads. They are a lot lighter than stock rotors so maybe there is a noticable stopping and acceleration improvement? But that's not why I got them, I got them to handle the heat of more aggressive track usage. And they look cool.

brand new they're 28mm thickness with 26mm minimum, right?

I believe so. I know for sure the min is 26mm, as that's stamped on the rotors.

@xtreme_exploder still available?

Yes