NWS Pics that make you :lol: every time you see them NWS

Deceptive

Muffin is my spirit animal
Established Member
Premium Member
Joined
Feb 10, 2011
Messages
13,445
Location
Nashville, TN
IMG_7284.JPG

IMG_7285.JPG

IMG_7288.JPG

IMG_7289.JPG

IMG_7291.JPG

IMG_7292.JPG



I’m collecting dildos for broke ass hoes. I call it, “Toys for THOTs”
 

SecondhandSnake

Well-Known Member
Established Member
Joined
Jan 29, 2011
Messages
1,741
Location
Columbus, IN
View attachment 1679579

Sent from my SM-G965U using Tapatalk

Has to be CGI. I've never seen a shopping cart track that straight in my life.


As an engineer-

Me writing the documentation:
"Lubricate fastener with company proprietary thread lubricant using proprietary thread lubricant application tool A55-LUB3. Wipe away excess. Install finger tight. Torque to spec using company approved torque wrench calibrated to service procedure 121003 rev A. Complete exactly four heat cycles within 48 hours. Heat cycles must achieve a minimum of 100 deg C (212 deg F) and last for a minimum duration of 60 minutes. After fourth cycle remove fastener and measure fastener stretch. If stretch is acceptable per table 2a, reinstall and repeat process for final installation."

11.jpg


Me in the garage working on my own projects:
0.jpg

 

Users who are viewing this thread



Top