Cobra Rear Brakes same as GT?

me32

BEASTLY SHELBY GT500 TVS
Moderator
Premium Member
Joined
Sep 6, 2005
Messages
18,457
Location
CA,NorCal
No, rotors are bigger and so is the mounting bracket for the cobra.

Calipers and pads are the same.

What exactly are you looking todo?
 

fivelitrecobra

Active Member
Established Member
Joined
Jul 2, 2013
Messages
529
Location
PA
No, rotors are bigger and so is the mounting bracket for the cobra.

Calipers and pads are the same.

What exactly are you looking todo?
Just picked up an 03 with an SRA swap. Going to install new rear brakes and rotors, just wanted to get some clarification on what parts I needed.
 

2000GTSTANG

Well-Known Member
Established Member
Joined
Nov 26, 2006
Messages
1,791
Location
Plymouth, MI
Take a look at the rear and see if the rotors are vented or solid and if the caliper bracket is one connected piece under the brake caliper or if it doesn't connect. If they're vented and you have a piece that connects the two sides of the bracket, they are the 11.65" Cobra brakes. If they are solid, non-vented, and there's a gap between the two sides of the caliper bracket; then you have GT brakes.

I've seen GT rear brake rotors installed with Cobra caliper brackets as well so be careful about that. There was only a few mm between the caliper bracket at the hat of the rotor.

21_caliper_brackets.jpg
 

Users who are viewing this thread



Top