1994-2004 SN95, New Edge, Terminator phone mount

shurur

Well-Known Member
Established Member
Joined
Jan 2, 2011
Messages
3,760
Location
Lutz, FL
Panavise 1994-2004 mustang cell phone mount 75107-795

Adding this for pics:
Panavise hard phone mount installed.
Note: I found post this from Scottydsntknow and in no way am I putting this panavise mount down.

It can be bought here:
https://www.summitracing.com/parts/...ax9lULdpfbx4ANsBktohOmFo8BdfxfdRoC4_cQAvD_BwE

Having said this, I am not happy with how busy it is around the steering wheel.

I just want to put this out for folks who might be interested in another panavise that appears to work.

I have no radio or bezel in both my Audi and my Mustang.

I kept looking at the mount in my Audi and decided to see whether it would work in the Mustang.

8888888888888888888888888888888888888888
I found that the one for the 2002+ Audi A4 works for the right side of the climate control when mounted to the bottom right bolt, as it snuggs against the panel better there to allow the bezel to fit without modifying it.

Panavise 75102-607




Note:
I have different panavise mount coming in the mail today and hopefully will post up pics of both "soon."
 
Last edited:

scottydsntknow

Well-Known Member
Established Member
Joined
Oct 18, 2007
Messages
1,207
Location
Rota
Ay, I got seent this lol. Its busy around the steering wheel if you don't use the offset mount. Offset mount moves it right in front of the center left vent. Plenty of room and easy reach of your hand. Over where you have it on the right side of the stereo is way too far away. I'll get pics of my setup manana.
 

shurur

Well-Known Member
Established Member
Joined
Jan 2, 2011
Messages
3,760
Location
Lutz, FL
Ay, I got seent this lol. Its busy around the steering wheel if you don't use the offset mount. Offset mount moves it right in front of the center left vent. Plenty of room and easy reach of your hand. Over where you have it on the right side of the stereo is way too far away. I'll get pics of my setup manana.

Got you.
I think you made a review on Amazon about it too?

All my mounts are out to the right of the center console; so I have gotten so I like them there as it it is familiar to me now. Imo either way, the panavise is the way to go.

Definitely please post up some pics of what you have. Your pics were the only ones I could find of the panavise for our year mustangs.
 

scottydsntknow

Well-Known Member
Established Member
Joined
Oct 18, 2007
Messages
1,207
Location
Rota
Yeah I did the amazon review thing. I'll get pics... I've been busy with my RC planes because the club is finally allowed to get back out to the field and fly. Have a whole shitton of stuff to do to the stang as well...
 

shurur

Well-Known Member
Established Member
Joined
Jan 2, 2011
Messages
3,760
Location
Lutz, FL
Yeah I did the amazon review thing. I'll get pics... I've been busy with my RC planes because the club is finally allowed to get back out to the field and fly. Have a whole shitton of stuff to do to the stang as well...

Thanks..I can see that one would want the phone closer should it be used for racing, 0-60 apps etc. The details of your setup are important to this thread, as there is so little out there that people are just writing off the panavise.

I use mine for google maps and that is about it.
I have another "right side" panavise 75137-107 for a 07 camry coming maybe Tuesday.
I want to give that a try.
It was $10; so I decided to give it a try.
 
Last edited:

shurur

Well-Known Member
Established Member
Joined
Jan 2, 2011
Messages
3,760
Location
Lutz, FL
Panavise 75137-107 for a 07 camry


I had to add another 5/16" hole on the original panvise for the guide post on the climate control panel. I drilled a pilot hole through the climate control to mark the center of the post.
Then I had to file and oblong the holes to get it snugged to the side (much like the previous Audi panavise already had done from the factory).

I sure do like the mute on IMGUR, some folks seem to live for making negative comments.
 
Last edited:

scottydsntknow

Well-Known Member
Established Member
Joined
Oct 18, 2007
Messages
1,207
Location
Rota
So my radio is out along with half the dash for upgrades and etc... but... again... visualize the phone mount literally directly in front of the left center vent. That's where my setup puts it. If I do ever wind up going double DIN the phone will go in the console and I'll control it all from the sync'd stereo. Or... I've got a full Android smartwatch on the same SIM as my primary line and I'll control it all from my wrist. I don't even take my phone with me half the time anymore, all controlled from the wrist. 24th century Star Trek communicators are here. If someone voice calls me I can legit answer from my wrist like Kirk or Picard or Sinclair etc...
 

shurur

Well-Known Member
Established Member
Joined
Jan 2, 2011
Messages
3,760
Location
Lutz, FL
So my radio is out along with half the dash for upgrades and etc... but... again... visualize the phone mount literally directly in front of the left center vent. That's where my setup puts it. If I do ever wind up going double DIN the phone will go in the console and I'll control it all from the sync'd stereo. Or... I've got a full Android smartwatch on the same SIM as my primary line and I'll control it all from my wrist. I don't even take my phone with me half the time anymore, all controlled from the wrist. 24th century Star Trek communicators are here. If someone voice calls me I can legit answer from my wrist like Kirk or Picard or Sinclair etc...

Nice..post up on a new thread for sure...link this if you want..."The Next Generation..."

Maybe just a part number(s) for the Panavise holder+ you used to get you phone mounted where it was? It's the one with the turn wheel? I may try it later.

I just put my dash back in.
I broke the tube off for the evaporator in a testosterone moment.

I pinched my temp sensor line for my rearview mirror while putting in the dash and had to bypass that section with a new splice, etc.

I just put in the same gauge cluster you already have.
Now the 2242 oil pressure sensor is already bad out of the box..reads 97 ohms and oil pressure is twice what is should be; so I crawl under the car again soon with a different
0-230 +/- 20% ohm part again.

EDIT: I plan to go double DIN; Crutchfield now has a kit for the single DIN folks.
 
Last edited:

Users who are viewing this thread



Top