JLT 3.0 Question

Maybe i missed this somewhere in a search, but I'm wondering if anyone has had any fitment issues with the drivers side JLT separator if using a 100mm snub idler.

Thanks.

Mine fit fine with 100mm idler, they work pretty well till you get up there in power. I have 2 ill sell cheap if you need them I ran one on each valve cover.. I ended up just venting it

I have picture somewhere if it helps, ill try to find it

This was before I redid the fittings to give it more clearance

I did also when i went to go install it. It's basically meant for when you don't have that idler. I ended up zip tying it onto one of the steel power steering lines and never had an issue with it moving afterwards.

Sent from your girl's SM-G960U using the svtperformance.com mobile app

Mine would not fit, so i mounted it on the firewall.

I've had mine on the firewall as well.

I was actually able to make it fit, I just moved the power steering line a little. Tight, but it will do.




Sent from my iPhone using the svtperformance.com mobile app

Terrible mounting location for the aftermarket idle.

X3 on firewall
Much cleaner look almost invisible