How many miles on your Terminator and what HP

400k+ that’s insane


Sent from my iPhone using svtperformance.com

58k whipple 2.9, anything and everything done to the car, still stock motor stock trans and I race the hell out of that thing.

2003 OW 13,000 miles.
2.2 kenne bell Hp/ "not enough"


Sent from my XT1254 using the svtperformance.com mobile app

805 cobra said:

2003 OW 13,000 miles.
2.2 kenne bell Hp/ "not enough"
View attachment 1631144

Sent from my XT1254 using the svtperformance.com mobile app

Click to expand...

Seen you around town before and at the Ventura cats and coffee. Nice car


Sent from my iPhone using the svtperformance.com mobile app

Bought the car with 57k or so on it with a 2.9 pulley and stock blower. One previous owner who said that’s all he did to it. At about 60k miles I had a 2.3 VMP blower put on it with a 3 upper. Made about 600/550. Issues started popping up. Finally went to a full return fuel system and E85 with a 2.8 upper. Now at around close to 63k miles. Car runs better now than it ever did. Engine is totally stock. Trans has a FR TOB, spec 3 clutch but that’s about it really. It’s amazing how stock the car is. I’d guess 650+hp/torque. They will hold some major power


Sent from my iPhone using svtperformance.com

03sonblucobra said:

Seen you around town before and at the Ventura cats and coffee. Nice car


Sent from my iPhone using the svtperformance.com mobile app

Click to expand...

Thanks....next time you see me come by and say what's up. Want to set up a cruise a or go to Fontana for some 1/4 mile runs. With a couple of the of the local cobras. Once this Corona virus end

Sent from my XT1254 using the svtperformance.com mobile app

03 with 24,250 miles. No idea on what it makes.
Long tubes, off road x, magnaflow cat back, 2.7 upper, billet flow idler set, JLT cold air, and VMP tune.

460+ pullied eaton 73k miles

Sent from my SM-N960U using the svtperformance.com mobile app

04 Cobra 11,800 miles currently (garage Queen) 507/480 Steggy Stage 4 and all the bolt ons. Ordered a 2.9 Gen 4 Whipple, going to a return system and E85. Hoping to make over 700 at the tires!

34k w/ ~750RWHP

21k miles... Currently under the knife but expected to be north of 700 once its together.

2.9 whipple, e85 ect ect ect

1Bad04Mystic said:

04 Cobra 11,800 miles currently (garage Queen) 507/480 Steggy Stage 4 and all the bolt ons. Ordered a 2.9 Gen 4 Whipple, going to a return system and E85. Hoping to make over 700 at the tires!

Click to expand...

Unless you only pulley for like 19psi.....you'll make WAY over 700 on ethanol and a 2.9 gen4 24+psi. More like 800 with the crusher. Get ready lol

Whatever bone-stock 04 Terminator makes. Really wish it was around 500 rwhp but such is life.

Haha

c6zhombre said:

Unless you only pulley for like 19psi.....you'll make WAY over 700 on ethanol and a 2.9 gen4 24+psi. More like 800 with the crusher. Get ready lol

Click to expand...

Going standard inlet for now, maybe Crusher down the road when more funds are available!

30,500. 448/512 with 2.9 upper and 4lb lower. Borla catback, JLT RAI

20k miles, made 740whp Gen 2 2.9, 11:1, 17# through a 4R75.
Should be 1000+ now with single turbo, 10:1, Holley, E, TH400

72K miles, been at 515/550 with 2.76/4lb, Dragon TB/plenum, JLT RAI, JBA mids, catted Bassani X-pipe and Stingers since about 60k miles.

26k miles, cat back, intake a dime under 400 hp , mostly under car cover in the garage

77k miles, 700 rwhp - Whippled since 51k.

Purchased with 39k in 2010, had a 2.9" lightning pulley and a short throw at the time.

33k miles making right around 650 wheel. 3.4 whipple, stage 3comp cams, stock bottom end. Pretty conservative tune.