What did you do to your foxbody mustang today?

03SVT10 said:

Got the tranny back in today. Just need to tighten everything down and change the pinion seal.

Click to expand...

Redline D4 ATF delivered today. Tranny filled and buttoned everything up and took it around the block. Clutch grabs much better than the previous FRPP clutch. I am happy with the Spec clutch so far. We shall see after 500-1000 miles.

It's nice not worrying about a little leak here and there now! For however long that lasts .

Might as well get this done. Motor mounts and transmission mount.

Sent from my Moto E (4) Plus using Tapatalk

Painted the windshield trim black and attempted to replace the center caps with Cobra R's. The very first one I popped in cracked directly in half. So I guess I'll just stick with these for a bit. Eventually I'll get a new set of wheels to replace these '95 Cobra R's anyhow.

Motor and transmission mount installed. I've been fighting a vibration/violent shake at lower speeds in higher gear since last summer.

I appears to be gone!

Sent from my Moto E (4) Plus using Tapatalk

I think I'm going to order that transmission cross member cause mine looks beat up. Do you still have a t5 Bdubbs?

triple-s said:

I think I'm going to order that transmission cross member cause mine looks beat up. Do you still have a t5 Bdubbs?

Click to expand...

Yes sir I do. Great upgrade!

Sent from my Moto E (4) Plus using Tapatalk

Bdubbs said:

Motor and transmission mount installed. I've been fighting a vibration/violent shake at lower speeds in higher gear since last summer.

I appears to be gone!View attachment 1632643View attachment 1632644View attachment 1632645View attachment 1632646View attachment 1632647View attachment 1632648View attachment 1632649

Sent from my Moto E (4) Plus using Tapatalk

Click to expand...

Killing nvh is such a satisfying feeling.

311-420 said:

Killing nvh is such a satisfying feeling.

Click to expand...

You are 100% correct! I forgot to mention I also cleaned up the main ground cable that goes from block to the frame. The block side was pretty bad.

Sent from my Moto E (4) Plus using Tapatalk

Finally installed the high flow cats I’ve had sitting around for 2 years. Will just use some clamps for now until I can weld it up. Looking forward to the smell going away.




Sent from my iPhone using the svtperformance.com mobile app

Bdubbs said:

Yes sir I do. Great upgrade!

Sent from my Moto E (4) Plus using Tapatalk

Click to expand...

Did you feel more NVH with the stiffer mounts and crossmember?


Sent from my iPhone using Tapatalk

fastsvo said:

Did you feel more NVH with the stiffer mounts and crossmember?


Sent from my iPhone using Tapatalk

Click to expand...

Not that I can really tell. But all my mounts were shot. And my violent car shake is gone.

Sent from my Moto E (4) Plus using Tapatalk

Bdubbs said:

Not that I can really tell. But all my mounts were shot. And my violent car shake is gone.

Sent from my Moto E (4) Plus using Tapatalk

Click to expand...

Nice to hear. The only clue I have towards the engine mounts being possibly bad is when I crank the engine over with the coil wire unplugged the steering wheel, alongside with the shifter handle, will vibrate during this process.


Sent from my iPhone using Tapatalk

fastsvo said:

Nice to hear. The only clue I have towards the engine mounts being possibly bad is when I crank the engine over with the coil wire unplugged the steering wheel, alongside with the shifter handle, will vibrate during this process.


Sent from my iPhone using Tapatalk

Click to expand...

Do you the mounts look worn?

Sent from my Moto E (4) Plus using Tapatalk

Bdubbs said:

Do you the mounts look worn?

Sent from my Moto E (4) Plus using Tapatalk

Click to expand...

I have to take a closer look. The car only has 61,000 original miles


Sent from my iPhone using Tapatalk

fastsvo said:

I have to take a closer look. The car only has 61,000 original miles


Sent from my iPhone using Tapatalk

Click to expand...

Report back what you find. They can crack and get worn from age as well.

Sent from my Moto E (4) Plus using Tapatalk

Turned out great.




Sent from my Moto E (4) Plus using Tapatalk

Oh that is cool!! Great idea.

Dam that looks nice! I just ordered the gauge cluster from Florida 5.0 waiting to see how long till they make it. l went with the cobalt autometer setup.

Bdubbs said:

Turned out great.

View attachment 1635946


Sent from my Moto E (4) Plus using Tapatalk

Click to expand...

Wow I really like that.


Sent from my iPhone using Tapatalk

triple-s said:

Dam that looks nice! I just ordered the gauge cluster from Florida 5.0 waiting to see how long till they make it. l went with the cobalt autometer setup.

Click to expand...

You will like it!

Sent from my Moto E (4) Plus using Tapatalk