Transmission bolts 6R80 to Coyote specs anyone?

Simple question, I need transmission to engine mounting bolts for a 6R80 to 5.0 Coyote, what are the specs?
Transmission case (bellhousing) to engine block bolts.
I have a 2wd 6R80 and a Coyote block but no bolts.
I guess my search skills are lacking, but without the dealership open, this has been harder to find than I imagined.
So far I have M10x1.5 about 80mm, but without bolts to go off of, no concrete web info.
Any help appreciated.
-J

Just go to ford parts website and look up the bellhousing bolts?

Most important thing you need is the shim plate that goes between the block and bellhousing.

MachME said:

Just go to ford parts website and look up the bellhousing bolts?

Most important thing you need is the shim plate that goes between the block and bellhousing.

Click to expand...

This!!!

And take a look at places like Bolt Depot when you figure out the sizes. They tend to have a good selection of flanged 10.9 bolts. Buying from the stealership will most likely cost you substantially more provided you cant wait for them to show up. The markup on hardware from the dealer is insane!

Use Ford vendor on here, whitebearlake for parts.

This guy will have them or tell you anything you want to know and answers the phone. Name is Mike.

Forte's Parts Connection

railroad said:

This guy will have them or tell you anything you want to know and answers the phone. Name is Mike.

Forte's Parts Connection

Click to expand...

plus 1 for Mike !

He’s a walking Ford encyclopedia

I’ve used him for years, since he’s local to me by about 45 minutes.

MachME said:

Use Ford vendor on here, whitebearlake for parts.

Click to expand...

I use my local dealer who matches their prices.
So seriously, on a weekend when no dealers are open, does anyone have a link or details on specs for these bolts?
Can you find them on a website?
I did my best at the hardware store and the M10x1.5 75mm from Lowe’s worked for my mock up.
I’ll get with a dealer this week.
-J