Any Injector Flow/Testing Experts in here?

earico

It's 4:20 somewhere...
Established Member
Joined
Jan 13, 2011
Messages
5,168
Location
SA TX
How he flowed them on the left. How they were supposed to be flowed on right:

View attachment 1627935

LMMFAO. Well the deviation between them is what you're really concerned with. Even backwards that deviation data should be relevant. I have ID2000s....same base injector you have. Great injectors. Just don't leave them sitting in e85 for long periods of time (3 weeks +) and you'll be alright. They can rust because of the materials used.
 

SecondhandSnake

Well-Known Member
Established Member
Joined
Jan 29, 2011
Messages
1,743
Location
Columbus, IN
I bought the EV6 from here: BOSCH 210LB EV6/14 INJECTOR SET FOR 8-CYL APPLICATION

The "spacer hat" is needed so that it is the correct height for the 03/04 cobra and other mod motors..

Awesome. I didn't even realize they required a spacer. I'll have to do some measuring to see if they require the 10mm or 20mm spacer. I also found there seems to be a few versions of those injectors from Bosch, including a version with the EV6/USCAR connector, and a standard length one with the EV1/Jetronic connector.
 

GodStang

Well-Known Member
Established Member
Joined
Aug 20, 2003
Messages
14,719
Location
Aiken, SC
Awesome. I didn't even realize they required a spacer. I'll have to do some measuring to see if they require the 10mm or 20mm spacer. I also found there seems to be a few versions of those injectors from Bosch, including a version with the EV6/USCAR connector, and a standard length one with the EV1/Jetronic connector.


Correct. The ones I linked are the EV6/USCAR since they are what I need for my 03/04 Cobra. the EV1 are super easy to find but I did not want to run an adapter. Use the flow data for the ID2000s (same injectors) and you will be golden!
 
Last edited:

Users who are viewing this thread



Top